How to Compare Glass Beads for Road Marking: A Buyer’s Framework
How to Compare Glass Beads for Road Marking: A Buyer’s Framework
Comparing glass beads for road marking starts with the project’s governing specification and application—not with a product name or a single refractive-index figure. Buyers should align the required standard and bead use with the declared particle-size distribution, refractive index (RI), finish, color, and documented acceptance criteria. The available DylanTech product records identify several road-marking families and size scopes, but they do not provide RI test values or establish that each named product conforms to a particular standard edition. Those points should be confirmed against the project documents and product-specific evidence before purchase.
This decision framework is intended for buyers moving from initial research toward a comparable shortlist. It explains what the available records establish, where labels should not be treated as interchangeable, and how to make a quotation or sample acceptance process more precise. It does not declare a universal best bead: the suitable specification depends on the project’s requirements, and the supplied data does not support performance rankings.
Start with the specification and the bead’s role
The first comparison question is which specification and application the project actually requires. The supplied product records include items named AASHTO M247 Types 2 and 3, EN1423, BS6088A, AS/NZS Type C, and Type IA and IIB, among other names in the related application data. These are product identifiers in the records; their names alone do not prove independent certification, compliance with a current edition, or equivalence across standards.
There is also an important edition distinction for AASHTO. The verified data describes AASHTO M 247-26 as a 2026 revision with Types 0 through 5: Type 0 is described as uniform gradation, Type 1 as standard, and Types 2, 3, 4, and 5 as modified gradations. This classification does not, by itself, establish that a product record carrying an M247 type name has been tested or approved under the 2026 edition. Buyers should identify the exact edition and project clause, then request evidence tied to the offered product and that requirement.
For Europe-related procurement, the available evidence describes EN 1423 as covering glass beads, anti-skid aggregates, and mixtures applied as drop-on materials. Hong Kong guidance references BS EN 1423 for drop-on beads and BS EN 1424 for premix beads. That is a useful application distinction, not a complete cross-standard comparison. It does not establish that every project using those standards has the same acceptance rules. The buyer should use the jurisdiction’s specification and determine whether beads are to be dropped onto a marking or incorporated as premix.
Other names in the assigned comparison scope—including BS6088B, AS/NZS Types B and D, and Types IB, IIA, and IIC—also require product-specific documentation before their technical requirements can be compared here. The supplied product records do not provide a particle-size scope for every one of these types. Missing data should remain a question for qualification, not be interpreted as proof that a product does or does not meet a requirement.
Use particle size as a documented comparison—not a shortcut
Particle-size distribution is one of the clearest comparison fields in the supplied product records. Several recorded scopes are:
| Recorded product name | Recorded size scope | What the record supports |
|---|---|---|
| EN1423 | 710–125 μm | A listed size scope for one EN1423 product record |
| EN1423 | 850–180 μm | A separate listed size scope under the same product name |
| AASHTO M247-Type 2 | 1180–180 μm | The range shown in that product record |
| AASHTO M247-Type 3 | 1700–710 μm | The range shown in that product record |
| BS6088A | 1180–425 μm | The range shown in that product record |
| AS/NZS Type C | 1300–425 μm | The range shown in that product record |
| Type IA | 850–75 μm | The range shown in that product record |
| Type IIB | 600–75 μm | The range shown in that product record |
| GB05 | 800–80 μm | A recorded road-marking product scope |
These figures are transcribed from the individual product records. They do not show a full sieve-by-sieve distribution, allowable percentage retained at each sieve, test method, or batch result. A range therefore provides a starting point for screening, not a complete acceptance specification. The two EN1423 records are especially important to keep separate: the same name appears with different scopes, and the supplied information does not explain whether the difference reflects distinct grades, markets, or another product distinction.
Before comparing quotations, ask each supplier to state the complete gradation in the project’s required format, the measurement units, the applicable test method, and the permitted tolerances. Compare like with like: a broad size envelope is not a substitute for the project’s sieve limits, and a product label should not be used to infer missing distribution data. If the project specifies a narrower band than the record displays, request confirmation of the offered grade rather than assuming that the recorded range is sufficient.
The product records also contain a general size-range field of 0.5 mm–20 mm alongside narrower product-specific scopes. Those entries do not explain how the broad range relates to each road-marking grade. Treat the product-specific scope and general range as separate fields until the supplier clarifies their relationship in writing. Do not combine them into a single asserted specification.
Compare RI labels carefully
RI is a decision field, but the available first-party product records do not state measured RI values for the listed road-marking grades. The assigned comparison includes RI 1.6 and RI 1.7 as values buyers should consider, and the scenario data identifies product names RI 1.6 and RI 1.7. Those names do not supply test methods, measured results, tolerances, or evidence that a specific offered batch meets either value. A buyer should request product-specific documentation before treating either label as an established specification.
External evidence in the supplied package reports that Potters Industries offers reflective beads described as standard 1.5 RI and high-reflective 1.9 RI. A Hong Kong sample road-marking specification states a minimum refractive-index class of n ≥ 1.5 for the described products. These examples show that RI values and classes can appear in commercial and procurement documents, but they do not prove that 1.6 or 1.7 is required for another project, nor do they establish a directly comparable performance outcome for the products in DylanTech’s records.
When a tender or technical schedule names an RI value, clarify whether it is a minimum, a nominal grade, or a measured result and which method and acceptance tolerance apply. Keep the RI evidence attached to the exact product and batch or lot it describes. Avoid comparing an unsupported product-name label with another supplier’s tested value. A higher stated RI alone does not establish project suitability or a guaranteed visibility result.
Check finish, color, material, and application fit
The road-marking product records describe the material as recycled glass and list smooth or matte surface finishes. They also list transparent, opaque, and mixed-color options, with custom color and size available in the product parameters. These are recorded product attributes; the records do not provide separate performance data showing how each finish or color affects a particular marking system.
For procurement, make each attribute explicit. If the project calls for transparent beads, do not leave the purchase order at a generic glass-bead description. If a matte or custom-color option is proposed, verify the exact offered variant and its compatibility with the project’s written requirement. The available records do not define color tolerances, finish measurement, coating details, or an acceptance method for those characteristics, so those details should be agreed and documented if they matter to acceptance.
Application terms also need precision. The verified evidence distinguishes drop-on materials described under EN 1423 from premix beads referenced under EN 1424 in Hong Kong guidance. The associated sample specification says drop-on beads shall comply with BS EN 1423 and premixed beads with BS EN 1424. These statements apply to that supplied Hong Kong specification context; they should not be generalized into a universal rule for every jurisdiction. State the intended use in the inquiry and confirm the governing project specification before selecting a family.
Build purchasing terms around comparable evidence
A useful comparison sheet separates required facts from commercial terms. For each offer, record the standard and edition requested, product name and grade, drop-on or premix role where relevant, size distribution, RI requirement and supporting evidence, finish, color, material description, packaging and delivery terms, and the acceptance procedure. The supplied corpus does not provide prices, minimum order quantities, lead times, packaging configurations, or payment terms. These therefore need to be obtained directly for the specific order rather than assumed from the product family.
Compare commercial offers only after confirming that they refer to the same scope. A low quoted unit price cannot make two products technically comparable if one quote omits a required size distribution or identifies a different application. Conversely, a difference in product name alone does not establish a technical advantage or shortfall. Keep technical conformity, commercial terms, and unresolved questions in separate columns so that a commercial comparison does not conceal a specification gap.
For acceptance, define what documentation accompanies the order and what happens if a delivered lot does not match the agreed specification. At minimum, align the purchase order, product data sheet, certificate or test documentation where required, sample identification, measurement units, applicable test method, and lot or batch identification. This is a procurement control framework, not a claim that the supplied records include such documentation for every product. In Texas, the verified TxDOT manual states that beads must conform to DMS-8290 and identifies testing using Tex-831-B; that requirement is specific to the cited Texas context.
A practical buyer comparison sequence
- Lock the project reference. Record the jurisdiction, exact standard or agency specification, edition, and relevant clause. Do not treat similarly named standards as interchangeable.
- Define the bead role. State whether the product is for drop-on use or premixing when the project makes that distinction.
- Normalize the product identity. Capture the supplier’s exact grade and model, then ask for confirmation that the quoted item is the one represented in the supporting documents.
- Compare measurable fields. Place the complete size distribution, RI requirement and evidence, finish, color, and material description side by side. Mark absent or ambiguous fields as unresolved rather than filling them by inference.
- Set acceptance before ordering. Agree which documents, test methods, tolerances, sample references, and lot identification will determine acceptance, consistent with the project specification.
- Compare commercial terms last. Request order-specific price, quantity, delivery, and payment terms only for offers whose technical scope has been made clear.
This sequence helps prevent a common comparison error: treating a standard name, one size endpoint, or an RI label as a complete product specification. It also makes a shortlist easier to audit because each decision can be traced to a project requirement or a document supplied for the offered grade.
What the available product information can—and cannot—support
DylanTech’s supplied records identify a range of glass-bead products for road marking and road safety, including the grades and size scopes listed above. They also record recycled glass, smooth or matte finish options, and transparent, opaque, or mixed-color options. The company is identified in the corporate corpus as a glass-bead manufacturer, and the supplied company information lists an annual output of 100,000 tons. That corporate figure does not establish the available quantity, delivery schedule, or capacity allocated to a particular grade or order.
The product information does not establish complete sieve distributions, verified RI results for each model, roundness values, coating details, product-specific certificates, batch acceptance results, or commercial order terms. Buyers evaluating high-refractive-index glass beads, including grades described as 1.6 or 1.7, should treat these as evidence requests unless a project-specific document already defines them. Similarly, terms such as traffic safety glass beads or high retro-reflective glass beads should not replace the exact performance and acceptance requirements in the governing specification.
The practical decision is therefore not to select a grade from a label alone. First establish the project’s specification and bead role; then compare the documented grade, distribution, RI evidence, finish, and color; finally agree the purchase and acceptance conditions. This framework allows a buyer to compare options without treating missing information as compliance, failure, or performance proof.
Frequently asked questions
How should buyers compare AASHTO M247 and EN 1423 glass beads?
Start with the project’s jurisdiction and required specification edition, then compare the exact product grade, application role, size distribution, and required test evidence. The supplied evidence describes AASHTO M 247-26 Types 0–5 and describes EN 1423 as covering drop-on materials, but it does not establish that a named product conforms to either standard or that the systems are interchangeable.
What particle-size data should a supplier provide?
Request the complete sieve-by-sieve distribution, units, test method, and permitted limits required by the project. The supplied product records list ranges for several grades, but they do not provide full distributions or test results. A range alone may not demonstrate that the project’s gradation limits are met.
Do the available records verify RI 1.6 or RI 1.7 for a specific grade?
No measured RI values or supporting test methods are included in the supplied first-party product records for the listed grades. The scenario data names RI 1.6 and RI 1.7 products, but buyers should request product-specific evidence and clarify the required threshold and acceptance method before treating either value as verified.
How do drop-on and premix requirements affect selection?
They identify different application roles in the supplied Hong Kong guidance: BS EN 1423 is referenced for drop-on beads and BS EN 1424 for premix beads. Buyers should confirm the applicable local project specification and state the intended role in the purchase documents; the cited guidance does not establish a universal rule for every market.
Which purchasing terms should be fixed before comparing quotes?
First align the technical scope and acceptance evidence. Then request order-specific price, quantity, delivery, packaging, and payment terms. The supplied corpus does not specify these commercial terms, so they cannot be inferred from a model name or product family.
DylanTech is identified in the supplied corporate information as a glass-bead manufacturer. Product selection should remain tied to the buyer’s project specification and product-specific documentation.
Tem questões ou precisa de mais detalhes?
Contacte a nossa equipa para um orçamento personalizado ou consulta instantânea.
Solicitar orçamento
Preencha o formulário abaixo e a nossa equipa entrará em contacto com uma proposta personalizada.
Chat direto do WhatsApp
Prefere conversar em tempo real? Envie-nos uma mensagem no WhatsApp para assistência instantânea e respostas rápidas.
- Obter orçamento personalizado
- Partilhar fotos ou documentos
- Discuta as suas necessidades diretamente
Geralmente responde em 5–30 minutos durante o horário de expediente.
