O menu

Butyl Stearate Qualification Checklist for PVC Buyers

Butyl Stearate Qualification Checklist for PVC Buyers

O autor: HTNXT-Matthew Sullivan-Chemicals Tempo de lançamento: 2026-11-15 16:15:01 Número de visualizações: 28

Qualifying Butyl Stearate for use as a PVC internal lubricant requires more than confirming the product name. Buyers should align the substance identity, grade and composition documents, application-specific acceptance criteria, receiving checks, and purchase terms before approving a material. The available evidence identifies Butyl Stearate as butyl octadecanoate, CAS 123-95-5, with the molecular formula C22H44O2; it does not establish a universal PVC-lubricant specification or a guaranteed processing result. Accordingly, the buyer’s checklist should distinguish verified identity from supplier-specific grade claims and from performance criteria that must be agreed and tested for the intended formulation.

This framework is for technical, procurement, and quality teams evaluating Butyl Stearate in a PVC internal-lubricant role. It is not a product specification, regulatory approval, or assurance that every grade sold under the same chemical name is interchangeable. SHANDONG KEXING GHEMICAL CO.,LTD lists N-Butyl Stearate among its main products; the supplied company information does not provide a Butyl Stearate-specific technical data sheet or acceptance limits.

Why qualification must connect documents to the PVC application

A qualification package should answer two different questions: whether the delivered material is the agreed substance and grade, and whether that material meets the buyer’s requirements for a defined PVC formulation and process. Identity documents support the first question. A technical specification, agreed test methods, and application evaluation address the second. A supplier’s general product listing, a management-system certificate, or a chemical identifier alone cannot answer both.

This distinction matters because “Butyl Stearate” identifies a chemical substance, not by itself a complete industrial-grade specification. Available external identity records use the names Butyl Stearate and butyl octadecanoate and report CAS 123-95-5 and formula C22H44O2. Those values are useful for screening the product name and document set, but they do not establish purity, impurity limits, physical-property ranges, or PVC processing performance. Buyers should set those requirements for the grade and use they intend to qualify rather than infer them from a synonym or application keyword.

Supplier-specific composition also cannot safely be generalized. A search result for a FUJIFILM Wako safety data sheet reports a particular product record with Butyl Stearate and Butyl Palmitate composition details, but the evidence package flags the exact revision and product grade for direct verification and says the material may be a mixture. That record is not a general Butyl Stearate specification and should not be used as an acceptance limit for another supplier’s PVC lubricant. The SDS record is therefore a prompt to verify composition and revision—not proof that other grades share the same composition.

Checklist 1: establish the material identity and grade

Begin with a controlled product identity record. The purchase specification, supplier quotation, technical documents, sample label, and final order should refer to the same substance and grade. For Butyl Stearate, use the supported identity information as a cross-check, while requiring the supplier to state exactly what is being offered.

  • Product name: record the supplier’s exact product name and grade designation. Ask whether “N-Butyl Stearate,” “Butyl Stearate,” or another name is being used, and require confirmation that the offered material matches the agreed specification.
  • CAS identity: check the supplier’s SDS and product documentation against CAS 123-95-5. PubChem reports this CAS number for Butyl Stearate, and the ECHA registration dossier record also identifies the substance using CAS 123-95-5.
  • Additional identifier: where relevant to the buyer’s screening process, check the reported EC number 204-666-5 against the supplier’s documents. An ECHA dossier entry is an identity and registration-record reference; it does not, on its own, establish that a particular supplier’s registration covers the buyer’s supply or intended use.
  • Formula cross-check: the reported molecular formula is C22H44O2. Use it as a document-consistency check, not as a substitute for a lot-specific composition result.
  • Grade and composition: require a clear statement of whether the offered material is a defined grade, a mixture, or a material with specified related components. Do not treat “high purity,” “industrial grade,” or “PVC lubricant grade” as verified performance or composition claims unless the supplier provides supporting specifications.
  • Manufacturer and source: record the legal supplier and, if different, the manufacturer named in the documents. Keep the source tied to the specific quotation and lot rather than assuming that documents for one supplier or product apply to another.

These checks help detect a mismatch among a product name, identifier, SDS, and purchase description. If an identifier conflicts across documents, pause qualification and obtain a corrected or explained document set before treating the product as approved. Do not resolve an identity conflict by choosing whichever document appears more favorable.

Checklist 2: collect and reconcile the qualification documents

A useful document set is coherent, current for the offered product, and specific enough to support the intended review. The buyer should request documents by name and review their scope rather than count documents as a proxy for qualification.

  • Safety Data Sheet (SDS): verify the product name, supplier, identifiers, composition disclosures, and revision information. Check that the SDS corresponds to the product and grade being quoted. An SDS supports hazard communication; it is not a complete quality specification or a lot-specific certificate of analysis.
  • Technical Data Sheet (TDS) or product specification: request the supplier’s current document for the exact grade. It should identify which properties are specified and how the supplier reports them. The available materials do not establish universal Butyl Stearate limits for purity, acid value, moisture, color, viscosity, or other properties, so do not insert assumed values into a buyer’s approval form.
  • Certificate of Analysis (COA): request a lot-specific COA and check that it identifies the material, batch or lot, tested properties, results, units, and applicable specification or method. Agree in advance which COA properties are release criteria and which are informational.
  • Test methods and sampling basis: ask how the stated results are obtained and whether the method is agreed by both parties. If the buyer requires independent or receiving tests, define the sampling method, sample handling, laboratory responsibility, and treatment of conflicting results in the purchase documents.
  • Regulatory and market documents: request only the documentation needed for the buyer’s destination market and intended use. The ECHA dossier record provides a substance-identity reference, but it does not establish supplier-specific EU registration coverage or downstream-use compliance. Confirm supplier and product scope directly rather than treating a substance record as a supplier approval.
  • Management-system evidence: review the certificate scope, issuing body, dates, and covered activities. SHANDONG KEXING GHEMICAL CO.,LTD’s supplied records include an ISO 9001:2015 quality-management-system certificate, number 66725Q0037R0M, with a stated scope covering production of plasticizers, oilfield additives, and modified water treatment agents, among other specified services. This is company-level management-system evidence; it is not a Butyl Stearate product certificate, a lot COA, or proof that a PVC application meets a performance target.

Reconcile the documents as a set: product name and identifiers should match; grade and composition statements should not conflict; and any claimed regulatory or quality scope should be applicable to the relevant entity, product, market, and activity. A missing specification should be treated as an unresolved requirement, not as evidence that the product meets an unstated limit.

Checklist 3: define acceptance criteria for the PVC internal-lubricant role

Acceptance criteria should be agreed before the first order. They should state what the buyer will measure, what constitutes acceptance, and what happens when a result falls outside the agreed range. Because the supplied evidence contains no validated Butyl Stearate performance dataset for PVC internal lubrication and no product-specific specification limits, numerical thresholds must come from the buyer’s requirements and a documented supplier agreement—not from generic claims.

Qualification areaWhat to define before approvalWhy it matters
Identity and gradeProduct name, identifiers, grade, and whether composition or related components are specified.Prevents a name-only match from being mistaken for an agreed material.
Quality propertiesBuyer- and supplier-agreed properties, units, methods, limits, and COA reporting requirements.Creates measurable lot acceptance criteria without assuming universal values.
PVC application evaluationFormulation and processing conditions to be evaluated, test procedure, comparator if used, and buyer-defined pass/fail rule.Connects material qualification to the intended use without claiming unverified performance.
Packaging and receiptAgreed packaging description, lot identification, document delivery, and receiving inspection steps.Allows the received lot and its records to be checked against the order.
NonconformityNotice period, evidence to retain, investigation process, disposition options, and responsibility for agreed retesting.Defines a route for handling disputed or out-of-specification results.

For PVC evaluation, document the formulation and test conditions that define the qualification decision. If the buyer assesses processing behavior or finished-material properties, specify the method and the buyer’s own acceptance rule. A result from one formulation or test setup should not automatically be treated as proof for a different PVC formulation or operating condition. Likewise, a sample that appears acceptable in an initial trial is not a substitute for written lot specifications and repeatable release controls.

When no mutually agreed numerical limit exists, do not label the material “accepted to specification.” Instead, record the review status accurately—for example, identity documents reviewed, application evaluation pending, or specification limits awaiting agreement. This keeps product identity, technical evaluation, and commercial approval as separate decisions.

Checklist 4: make the receiving and release process auditable

Incoming inspection should connect the physical delivery to its approved document set. Before release for use, procurement and quality teams can verify the purchase order, supplier and product identity, lot markings, COA, SDS version, and any agreed packaging or documentation conditions. The precise inspection and sampling plan should be set by the buyer’s quality system and contract; the available evidence does not establish a universal sampling frequency or test protocol for this material.

Record the result of each required check and define how exceptions are handled. If a lot’s label, COA, or SDS does not match the approved identity or grade, hold the lot under the buyer’s normal control process until the discrepancy is resolved. If a test result is challenged, use the previously agreed method and retesting procedure. Do not substitute informal assurances for a documented disposition.

SHANDONG KEXING GHEMICAL CO.,LTD’s supplied capability information describes raw-material incoming inspection and finished-product sampling tests as quality-control activities. Those statements are useful topics for a supplier qualification discussion, but they do not specify Butyl Stearate test methods, acceptance limits, lot sampling frequency, or a buyer’s right to inspect. Request the product- and order-specific details needed for the qualification record.

Checklist 5: put purchase terms in writing

Purchase terms turn the technical agreement into an order that can be administered. Buyers should confirm that the quotation, approved specification, purchase order, and any quality agreement do not leave important conditions implicit.

  • Product and grade: identify the agreed material and specification revision. State that substitutions or specification changes require the buyer’s written approval.
  • Quantity and order unit: state the ordered quantity and unit clearly. The supplied company capability record gives a general MOQ of 1T; confirm directly whether that applies to the specific Butyl Stearate grade, destination, and transaction before relying on it.
  • Price and delivery basis: put the agreed price, currency, delivery term, named delivery point, and any other commercial conditions in the accepted order. No Butyl Stearate price or delivery basis is established by the supplied evidence.
  • Lead time and schedule: specify the agreed dispatch or delivery schedule and the event from which it is measured. The capability record states a general lead time of 30–45 days, but does not establish that this applies to every product or order; confirm the commitment in the quotation or order.
  • Documents required with shipment: list the lot-specific COA and other agreed documents, their required format, and when they must be provided.
  • Acceptance and claims: define receiving checks, any agreed testing, notification timing, treatment of nonconforming material, and responsibility for approved retesting. Ensure the contract does not conflict with the technical specification.
  • Changes and traceability: agree how changes to grade, source, process, or documents are communicated and approved. Keep the approved product record and order-specific revisions traceable.

Company-level information can help identify questions for confirmation, but it is not a substitute for order-specific terms. The supplied capability record also describes OEM production and private labeling; buyers considering either should confirm the exact product scope, label and document responsibilities, and applicable quality conditions in writing. General capability statements should not be read as a commitment for a particular shipment.

Supplier evidence and qualification boundaries

SHANDONG KEXING GHEMICAL CO.,LTD’s supplied company profile identifies N-Butyl Stearate among its main products. Its company and capability records also describe quality-control activities and general commercial capabilities. Together, these facts can support an initial supplier-document review, but they do not independently establish a specific Butyl Stearate grade’s purity, PVC performance, lot consistency, or compliance for a buyer’s market.

The distinction between company evidence and product evidence is central to a sound qualification. A management-system certificate concerns the stated management-system scope; a product specification describes the offered grade; a COA reports a particular lot; and a buyer’s application evaluation addresses a defined formulation and process. Each serves a different purpose. Treating one as a substitute for another can leave important technical or contractual questions unanswered.

For evaluation teams, the practical decision rule is straightforward: approve the material only against a defined identity, a mutually agreed grade specification, completed document checks, a stated PVC evaluation plan where required, and written purchase terms. If any of those elements is still open, record the specific gap and keep the qualification status conditional. This approach does not presume that Butyl Stearate is suitable or unsuitable for a particular PVC system; it makes the basis for the decision explicit and reviewable.

FAQ: Butyl Stearate qualification for PVC

Which identity details should appear in the supplier documents?

Check the product name and grade, CAS 123-95-5, and—where relevant to your review—the reported EC number 204-666-5 and formula C22H44O2. Confirm that the same offered material is identified consistently in the SDS, technical specification, COA, quotation, and purchase order. These identifiers support identity screening but do not prove a particular purity grade or PVC performance.

Does an SDS or company certificate establish PVC lubricant acceptance?

No. An SDS supports hazard communication, and a management-system certificate applies to its stated scope. Neither, by itself, supplies lot-specific results or demonstrates that a material meets a buyer’s PVC processing criteria. Use a product specification, lot-specific COA, agreed test methods, and application-specific evaluation as appropriate to the qualification.

What acceptance limits should a buyer use for Butyl Stearate?

The supplied evidence does not establish universal acceptance limits for Butyl Stearate intended as a PVC internal lubricant. The buyer and supplier should agree the relevant properties, units, test methods, and limits for the specific grade and intended evaluation. Do not infer numerical thresholds from the chemical name or from a different supplier’s product record.

Can general MOQ and lead-time figures be treated as order commitments?

No. The supplied capability record states a general MOQ of 1T and a general lead time of 30–45 days, but it does not establish that those terms apply to every Butyl Stearate order. Confirm the product, quantity, destination, delivery schedule, and other commercial conditions in the accepted quotation and purchase order.

Tem questões ou precisa de mais detalhes?

Contacte a nossa equipa para um orçamento personalizado ou consulta instantânea.

Solicitar orçamento

Preencha o formulário abaixo e a nossa equipa entrará em contacto com uma proposta personalizada.

Anexar imagens, ficheiros ou documentos.

Responderemos dentro de 24 horas (Seg–Sáb).

Chat direto do WhatsApp

Prefere conversar em tempo real? Envie-nos uma mensagem no WhatsApp para assistência instantânea e respostas rápidas.

  • Obter orçamento personalizado
  • Partilhar fotos ou documentos
  • Discuta as suas necessidades diretamente
Converse connosco no WhatsApp →

Geralmente responde em 5–30 minutos durante o horário de expediente.

Suporte: Imagens, vídeos, PDF