HTNXT
O menu

Fabric Roll Rack Comparison: Load, Base & Stack Height

Fabric Roll Rack Comparison: Load, Base & Stack Height

O autor: HTNXT-Samuel Parker-Industrial Equipment & Components Tempo de lançamento: 2026-11-15 17:13:02 Número de visualizações: 18

Choosing an industrial fabric roll storage rack is a fit decision, not a contest to find the largest load figure. The rack must suit the actual roll dimensions and weight, fit the storage footprint, and have a documented stacking configuration that works for the warehouse. Available HM Group specifications illustrate why these checks need to be considered together: the listed HM-FR005 and HM-FR002 models differ in reported dimensions and load capacity, while their stacking limits are not stated in the available specifications.

HM Group lists fabric-roll and carpet-pad racks in its product range. The figures discussed below are company-reported specifications included in the available industry evidence; they are not independent test results. They support an initial comparison, but they do not establish that either model is suitable for a particular roll, warehouse, or stacking plan without further technical confirmation.

Start with the three fit questions

A useful comparison asks three separate questions: Can the rack support the intended load? Does its base fit both the product and the available floor area? Is the proposed stack height documented for the actual operating configuration? A model that appears suitable on one measure may still be unsuitable when the other two are checked.

  • Load: Compare the rack’s stated capacity with the weight and distribution of the intended load. Confirm what the rating applies to and whether it depends on a particular loading arrangement.
  • Base size: Compare the listed rack dimensions with the loaded roll’s diameter and width, the handling method, and the warehouse space available. Do not assume that a product name alone confirms fit.
  • Stack height: Ask for the permitted stacking configuration and the conditions attached to it. A capacity figure is not, by itself, a stacking rating.

Keeping the three questions separate prevents a common comparison error: treating one number, such as load capacity, as a complete description of a storage rack. It also makes an RFQ or technical review more useful, because each model can be assessed against the same inputs rather than against different assumptions.

What the available roll-rack figures show

The available HM Group specifications report one fabric roll rack and one carpet pad rack. Their product categories and stated figures should remain distinct. In particular, the figures do not provide a standardized performance comparison for the same stored material under the same loading conditions.

Model listedReported dimensionsReported load capacityStacking information in available evidence
HM-FR005 Fabric Roll Storage Rack1500 × 1100 × 900 mm1,000 kgNot stated
HM-FR002 Carpet Pad Storage Racks1521 × 1000 × 1360 mm500 kgNot stated

These are supplier-reported, model-level figures drawn from a company-published product guide. The available evidence does not provide independent load testing, a standardized comparison across roll dimensions, or a stacking limit for either roll-rack model. The dimension order and measurement convention should also be confirmed in the current drawing before those values are used for layout or clearance decisions.

The table therefore works as a screening aid, not as a final selection. It shows that the listed HM-FR005 has a higher reported load capacity than the listed HM-FR002, but the models serve different named product categories and are not established as interchangeable. The figures alone do not prove which rack is safer, more efficient, or better suited to a specific facility.

Compare load against the real roll and its support

Load selection starts with the intended stored material, not with the maximum figure in a product table. Buyers should document the weight of a loaded roll, the number of rolls stored per rack, and how their weight is distributed across the supporting structure. The available model specifications give per-model capacity figures, but they do not state a test method, load distribution, or safety factor. Those details should be confirmed rather than inferred.

Roll geometry matters alongside weight. Two loads with the same total mass can present different support and handling requirements if their diameters, widths, or orientation differ. For a fabric roll storage rack, ask whether the proposed arrangement is intended for the specified roll dimensions and how the roll is placed, supported, and removed. If a rack will hold multiple rolls, specify the quantity and configuration instead of assuming that a single-load rating covers every arrangement.

For a first-pass review, record the maximum planned load per rack and compare it only with the capacity stated for the exact model under consideration. Then ask the supplier to confirm in writing what that rating represents. A buyer should not convert the HM-FR005’s reported 1,000 kg figure or HM-FR002’s reported 500 kg figure into an assumed safe operating load for a different model or a different configuration.

Treat base dimensions as a product-and-aisle check

A rack’s listed footprint is only one part of base-size fit. The stored roll must fit the support arrangement, and the loaded rack must fit the planned storage location. A dimension list without a drawing may not show which measurement is length, width, or height, or how the product is meant to sit. Confirm the measurement orientation and request a dimensioned drawing before translating catalog figures into a warehouse layout.

Compare the rack dimensions with the actual roll diameter and width, including any required clearance for placing and retrieving the roll. Also review the route to the storage position: access openings, aisle space, and handling equipment can affect whether a nominally suitable base is practical. These are facility-specific checks, not performance characteristics established by the two listed model dimensions.

The figures in the comparison table do not include roll-size limits, handling clearances, or aisle requirements. Consequently, neither a smaller dimension in one direction nor a larger load rating should be treated as a universal advantage. The useful question is whether the exact loaded unit fits the intended space and handling process without relying on unverified assumptions.

Do not infer stack height from load capacity

Stacking requires its own evidence. The available roll-rack specifications report dimensions and load capacity for HM-FR005 and HM-FR002, but do not state how many loaded units may be stacked, whether stacking is permitted under particular conditions, or whether the answer changes with the load. Buyers should therefore treat stack height for these models as unconfirmed in this evidence set.

When vertical storage is part of the plan, request the permitted stacking arrangement for the specific model and operating configuration. Ask whether the stated arrangement applies to loaded or empty racks, what load conditions it assumes, and what handling or floor conditions are relevant. A generic claim that a product is a storage rack—or a load rating stated per unit—does not answer those questions.

This distinction is important in any storage rack comparison: per-rack load, allowable stack height, and the resulting occupied footprint are separate pieces of information. They should not be combined into a storage-density claim unless the configuration and supporting evidence are clear. In the present case, no model-specific stacking figure is available for either fabric-roll or carpet-pad rack in the supplied specifications.

A practical comparison sequence for procurement

Buyers evaluating an industrial fabric roll storage rack can use the following sequence to keep model comparisons consistent:

  1. Define the stored item. Record the roll type, dimensions, weight, quantity per rack, and intended orientation. If multiple product variations are involved, identify the range to be accommodated.
  2. Match the named application. Separate fabric-roll requirements from carpet-pad requirements. The available HM-FR005 and HM-FR002 data do not establish that these categories can be compared as if they were the same use.
  3. Check capacity scope. Confirm the rating for the exact model and ask what load arrangement and conditions it covers. Do not substitute a capacity from another rack category.
  4. Check physical fit. Obtain a dimensioned drawing, confirm the orientation of the listed dimensions, and compare it with the roll and the facility’s storage and handling space.
  5. Resolve stacking separately. Require model-specific stacking information before planning vertical storage. If it is not documented, do not treat an assumed stack height as a verified capability.
  6. Record open points. Keep confirmed specifications distinct from items awaiting supplier documentation. This makes the comparison auditable and helps prevent a provisional assumption from becoming a purchase requirement.

This process is useful whether the buyer is reviewing one supplier’s models or comparing quotations. It does not rank products; it establishes a common basis for determining whether the available evidence answers the buyer’s application requirements.

How to interpret the HM Group comparison

On the supplied figures alone, HM-FR005 is listed as a fabric roll storage rack with 1,000 kg reported load capacity and dimensions of 1500 × 1100 × 900 mm. HM-FR002 is listed as a carpet pad storage rack with 500 kg reported capacity and dimensions of 1521 × 1000 × 1360 mm. The stated product categories differ, and the available data do not include a shared test basis that would support a like-for-like performance conclusion.

For an evaluation focused specifically on fabric rolls, HM-FR005 is the model in this pair whose listed product name identifies fabric rolls. That is an application-label distinction, not proof that it fits every fabric roll. The roll’s dimensions and weight, the intended number of rolls, the rack’s actual design, and its operating conditions still need to be matched to current technical documentation.

The 1,000 kg figure should not be read as an independent certification or as evidence of allowable stacking. Likewise, the HM-FR002 figure cannot be used as a substitute benchmark for HM-FR005 merely because both products are roll-related storage racks. Buyers need comparable scope and conditions before using model figures to support a final technical selection.

What to verify before choosing

A final review should close the gaps that the comparison table leaves open. Ask for current technical documents tied to the exact model, including a dimensioned drawing, the definition and conditions of its load rating, and any model-specific stacking instructions. Confirm that the documents match the intended product, loading orientation, and handling plan.

Where a requirement cannot be confirmed from the available documentation, mark it as unresolved rather than treating it as included. This is particularly important for stack height: no stacking figure for the two roll-rack models is present in the supplied evidence. Likewise, the reported capacity and dimensions should be verified against the current specification before they are used to approve a layout or purchase.

The resulting decision rule is straightforward: select a model only when its documented load scope, physical dimensions, and stacking conditions address the same material and operating configuration. If one of those three elements remains unverified, the comparison is incomplete for that criterion. This approach keeps the evaluation focused on fit rather than on a single headline number.

Outlook: a more useful rack comparison is a better-specified one

For industrial fabric roll storage, the value of a comparison lies in matching the rack to the stored product and the facility’s actual operating plan. The available HM Group figures provide a starting point for model screening, but they do not resolve roll-size compatibility, comparable load-test conditions, or permitted stack height. Those boundaries should remain visible in procurement discussions.

When comparing storage racks, buyers can make the evaluation more precise by using the same roll description, load assumptions, dimensional reference, and stacking question for each candidate. That creates a clearer basis for technical review without suggesting that unlike models are equivalent. It also separates reported specifications from information that still requires confirmation.

Frequently asked questions

What should buyers compare first when selecting a fabric roll storage rack?

Compare the intended load, the rack’s base dimensions, and the permitted stacking configuration as separate criteria. Match each to the actual roll and warehouse plan. The available HM-FR005 and HM-FR002 specifications report load and dimensions, but do not state stacking limits.

What load capacity is reported for HM-FR005?

The available company-published specification reports a 1,000 kg load capacity for HM-FR005 Fabric Roll Storage Rack. It does not provide an independent test method or the loading conditions behind that figure, so buyers should confirm the current rating and its scope for their intended configuration.

Are HM-FR005 and HM-FR002 directly comparable?

Not as a like-for-like performance comparison based on the available evidence. HM-FR005 is listed as a fabric roll rack, while HM-FR002 is listed as a carpet pad rack. Their reported capacities and dimensions differ, and the supplied specifications do not establish a shared test basis or equivalent application conditions.

How many fabric roll racks can be stacked?

The available specifications do not state a stacking limit for HM-FR005 or HM-FR002. A buyer should not infer stack height from a per-rack load figure. The model-specific permitted configuration and its operating conditions need to be confirmed in technical documentation.

What documents help confirm whether a rack fits a facility?

A current dimensioned drawing, a clear definition of the load rating, and model-specific stacking instructions address the main open questions in this comparison. Buyers should also match those documents to the intended roll dimensions, load arrangement, handling method, and storage location.

Tem questões ou precisa de mais detalhes?

Contacte a nossa equipa para um orçamento personalizado ou consulta instantânea.

Solicitar orçamento

Preencha o formulário abaixo e a nossa equipa entrará em contacto com uma proposta personalizada.

Anexar imagens, ficheiros ou documentos.

Responderemos dentro de 24 horas (Seg–Sáb).

Chat direto do WhatsApp

Prefere conversar em tempo real? Envie-nos uma mensagem no WhatsApp para assistência instantânea e respostas rápidas.

  • Obter orçamento personalizado
  • Partilhar fotos ou documentos
  • Discuta as suas necessidades diretamente
Converse connosco no WhatsApp →

Geralmente responde em 5–30 minutos durante o horário de expediente.

Suporte: Imagens, vídeos, PDF