O menu

Hydraulic Adapter Shortlist for Mobile Machinery

Hydraulic Adapter Shortlist for Mobile Machinery

O autor: HTNXT-Samuel Parker-Industrial Equipment & Components Tempo de lançamento: 2026-11-16 06:23:45 Número de visualizações: 17

Choosing a Hydraulic Adapter for construction or agricultural machinery is a connection-matching decision, not simply a choice by product-family name. The interface, angle, available space, line route and required material all matter. For buyers comparing a focused set rather than a full catalog, the SAE Standard Hydraulic Adapter 6801, 6802 and 6805 models provide a useful starting spine: each is an elbow, but each joins different ends or turns the connection at a different angle.

NingBo NJ Hydraulic Adapter Co., Ltd is a manufacturer of hydraulic adapters and related hydraulic fittings. Its supplied product information lists carbon steel, SS304 and SS316 material options across the relevant families. The shortlist below organizes the named configurations by the job they perform. It does not establish that every size or combination is suitable for a particular machine; that depends on matching the actual ports, mating components and application requirements.

6802 Male JIC x Male Adjustable ORB 45-degree elbow hydraulic adapter
The supplied product image identifies model 6802 as a Male JIC x Male Adjustable ORB 45° Elbow.

How to use this shortlist

Hydraulic adapters connect system components through their specified interfaces. In a mobile-equipment assembly, the first useful question is therefore not “Which family is best?” but “What connection is required at each end, and what route must the line take?” A straight fitting, an angled elbow, a pipe-thread transition and a cap are different solutions to different connection tasks. Treating them as interchangeable because they appear in the same catalog family can lead to a mismatched specification.

The product records list SAE, JIC, NPT and BSP families, but they do not provide a complete dimensional table, size-by-size pressure rating or model-by-model material grade certificate. The model descriptions below identify only the configurations stated in the supplied information. For a purchase specification, confirm the exact thread designation, size, gender, angle, sealing interface and any other required dimensions on the drawing or product data for the selected item.

1. Use the SAE 6800-series elbows when direction and interface are the main issue

The 6800 series is the shortlist’s most direct starting point for angled SAE Standard Hydraulic Adapter configurations. The supplied model list identifies 6801, 6802 and 6805 with specific end combinations and angles. Those details should drive selection; the shared series name does not make the three parts equivalent.

6801 — Male JIC x Male Adjustable ORB 90° Elbow. Consider this configuration when the specified connection requires a male JIC end and a male adjustable ORB end, with a 90° turn. Its selection logic is the combination of those end types and the right-angle route—not a general claim that any 90° elbow will fit.

6802 — Male JIC x Male Adjustable ORB 45° Elbow. This model has the same stated end pairing as 6801 but a 45° angle. It is the relevant shortlist item when the required route calls for that angle. Before substitution between 6801 and 6802, verify that the assembly drawing permits the change in geometry and that the connection remains compatible with adjacent components.

6805 — Male Adjustable ORB x Female NPTF Pipe 90° Elbow. This configuration joins a male adjustable ORB end to a female NPTF pipe end at 90°. It differs from 6801 not only by angle but also by the second interface and its gender. It should be considered only when those ends match the equipment connection and the specified mating part.

These three examples show why a useful shortlist is configuration-based. An elbow angle affects routing, while the thread and end description determine what it can connect to. Neither feature alone confirms physical clearance or sealing compatibility in a particular machine. Check the port and mating-part documentation rather than relying on a generic label such as “orb adapter” or “high pressure hose adapter.”

2. Choose among JIC 2403–2609 models by end type and geometry

The Hydraulic JIC Adapter family lists models from 2403 through 2609, including 2403, 2404, 2405, 2406, 2408, 2500–2505 and selected 2600-series items. The supplied model captions provide identifiable examples rather than a complete description of every number in that range.

For a straight connection, the supplied descriptions identify 2403 as Male JIC x Male JIC Straight, 2404 as Male JIC x Male NPTF Pipe Straight, and 2405 as Male JIC x Female NPTF Pipe Straight. Model 2406 is Female JIC x Male JIC Straight. These descriptions distinguish parts by both interface family and end gender. A 2403 therefore cannot be treated as a generic replacement for a 2404 or 2405 merely because all are straight adapters.

Where the line needs to turn, the listed examples include 2500, Male JIC x Male JIC 90° Elbow; 2504, Male JIC x Male JIC 45° Elbow; 2501, Male JIC x Male NPTF Pipe 90° Elbow; 2502, Male JIC x Female NPTF Pipe 90° Elbow; and 2505, Male JIC x Female NPTF Pipe 45° Elbow. These are useful shortlist candidates when the required connection includes a JIC end and the other specified end and angle match. Model 2408 is identified as a Male JIC Plug, so it belongs to a different task from a through-connection adapter.

The product record also names 2601, 2602, 2603, 2605, 2606, 2608 and 2609, but does not give individual captions for those models in the supplied material. Their model numbers alone do not establish configuration, dimensions or application. Buyers should request or consult the applicable drawing before assigning any of these models to a particular joint.

3. Use NPT 5400/5500/5600 items for specified pipe-thread connections

The NPT Adapter listing includes 5400, 5500 and 5600 series models. The available captions identify several 5400 and 5600 configurations: 5404 is Male NPTF Pipe x Male NPTF Pipe Straight; 5405 is Male NPTF Pipe x Female NPTF Pipe Straight; and 5406 is listed as Male NPTF Pipe x Female NPTF Pipe Straight. The same family includes 5406-C, a Female NPTF Pipe Cap, along with 5406-P and 5406-HP plug variants described in the supplied captions.

For branching rather than a straight transition, the 5600-series examples include 5603, a Male NPTF Pipe x Female NPTF Pipe x Male NPTF Pipe Tee, and 5604 and 5605 tee configurations with different stated end combinations. The 5652 is identified as a four-way female NPTF pipe cross. Those descriptions make the selection principle clear: match every port in the fitting to the required line layout. A tee or cross is not a substitute for a straight adapter when the circuit does not call for a branch.

The model list includes 5500-series items, but the supplied product captions do not specify their individual configurations. Do not infer their end types or functions from the series number alone. Likewise, terms such as “npt to jic adapter” should be tied to a specifically documented JIC-to-NPTF configuration, such as the listed 2404 or 2501 only where its stated ends and angle suit the assembly. Confirm the exact thread form and mating interface before ordering.

4. Separate BSPP and BSPT variants in the specification

The BSP Adapter information distinguishes BSPP and BSPT product groups. The 1B family is listed as BSPP thread fitting; the supplied caption identifies model 1B as Male BSPP x Male BSPP Straight. Model 1BG9 is identified as Male BSPP x Male BSPP O-Ring 90° Elbow. By contrast, the 1T family is listed as BSPT thread fitting, and model 1T is captioned Male BSPT x Male BSPT Straight. The product names are similar, but the supplied descriptions do not make BSPP and BSPT interchangeable.

1BG9 Male BSPP x Male BSPP O-ring 90-degree elbow
The product caption identifies 1BG9 as a Male BSPP x Male BSPP O-Ring 90° Elbow.

The wider BSPP model list also includes 1BG, 1BT and other variants, while the BSPT list includes 1BT and 1T9 among others. A family listing is not enough to establish the exact configuration of every suffix. In particular, the supplied captions identify 1BT as Male BSPP x Male BSPT Straight and 1T9 as Male BSPT x Male BSPT 90° Elbow in the BSPT product information. When a specification calls for “BSP adapter,” write down whether it requires BSPP or BSPT and the exact end arrangement; do not leave that distinction implicit.

5. Treat cap and nut components as separate line-management items

The hydraulic cap nut record includes models 0304C, 0306 and 0318, but the captions show that they have different functions. Model 0304C is a Female JIC Cap. It is the listed item relevant to blanking a matching female JIC connection. Model 0306 is a JIC Bulkhead Lock Nut, while 0318 is a JIC Tube Nut. The supplied information does not identify either 0306 or 0318 as a line-blanking cap.

This distinction matters during maintenance, assembly and parts planning. If the task is to close an open compatible connection, specify the cap and the connection it must fit. If the task is to retain or assemble a bulkhead or tube connection, identify the corresponding lock nut or tube nut instead. The family heading “cap nut” should not be used to assume that every listed component performs the same blanking function.

Material choice: carbon steel, SS304 or SS316

The listed product families provide carbon steel, SS304 and SS316 as material options. The supplied information does not map each material to a specific model, size, finish or service condition, and it does not provide material certificates or a model-by-model comparison. Treat material as a required specification to confirm for the exact part, not as an assumption based on the family name.

For a construction or agricultural equipment RFQ, state the requested material explicitly and ask the supplier to confirm it against the part number and drawing. If the application has a defined environment or corrosion requirement, communicate that requirement as well and request supporting documentation appropriate to the procurement specification. Do not infer a particular service life or performance advantage from the fact that SS304 or SS316 is listed as an option. Material selection cannot compensate for incorrect threads, unsuitable geometry or an unverified pressure rating.

A practical shortlist check before ordering

  1. Record the required connection at each end, including JIC, ORB, NPTF, BSPP or BSPT where stated.
  2. Specify male or female ends and any adjustable feature only when the drawing or mating connection requires it.
  3. Choose straight, 45° or 90° geometry from the assembly route; verify clearance against the equipment layout.
  4. For tees, crosses, plugs and caps, state whether the job is to connect, branch, plug or blank a line.
  5. Confirm the exact model drawing, dimensions, material and applicable pressure information for the intended configuration.
  6. Keep the system-level requirement distinct from a general family range. The product records list a 3000–6000 PSI pressure range for the named product families, but do not provide model-specific values or test conditions for every configuration.

The application record supplied for construction machinery describes hydraulic pipeline sealing, thread locking and fastening, and pressure-bearing protection for mechanical hydraulic assemblies. It also gives a scenario operating figure of 6,000 PSI static pressure and 9,000 PSI burst pressure. Those figures belong to that scenario record; they are not identified as ratings for every model in this shortlist. The distinction is essential when translating an application description into a part approval or purchase specification.

What this shortlist establishes—and what it does not

For construction and agricultural machinery, the shortlisted configurations cover several distinct connection jobs: angled JIC-to-adjustable-ORB routes in the 6800 examples; straight and angled JIC connections, including selected JIC-to-NPTF combinations; NPTF straight, branch, plug and cap configurations; BSPP and BSPT variants; and separate cap, bulkhead-lock-nut and tube-nut items. The value of the shortlist is that it groups products by documented configuration rather than presenting model numbers as interchangeable options.

It does not establish that all listed models fit a particular machine, that every size is available in every material, or that a family-level pressure range applies to each individual part. The supplied product information lists 220°C as the maximum stable operating temperature and reports a 120-hour salt spray test, with white rust at 120 hours and red rust at 240 hours. These are family-level statements in the provided records; verify their applicability and documentation for the precise model and material under evaluation. No product-specific dimensional table or test report is supplied here.

Accordingly, the most reliable evaluation path is to start with the machine port and mating component, map the exact thread and end form, select geometry for the route, and then confirm material and performance data for that model. This keeps the shortlist useful for research and evaluation without turning a catalog family into an unsupported fit or performance guarantee.

FAQ

How should a buyer choose between the 6801 and 6802?

Both are listed as Male JIC x Male Adjustable ORB elbows. The 6801 is 90° and the 6802 is 45°. Select the angle required by the equipment layout, then verify the specific connection and clearance against the assembly drawing.

Which listed models connect JIC and NPTF ends?

The supplied captions identify 2404 as Male JIC x Male NPTF Pipe Straight, 2405 as Male JIC x Female NPTF Pipe Straight, 2501 as Male JIC x Male NPTF Pipe 90° Elbow, and 2502 and 2505 as Male JIC x Female NPTF Pipe elbows at 90° and 45°, respectively. Confirm the selected model’s exact mating ends and dimensions.

Are BSPP and BSPT interchangeable in this shortlist?

No interchangeability is established by the supplied product information. It lists BSPP and BSPT as distinct fitting groups and identifies separate configurations, including 1B Male BSPP x Male BSPP Straight and 1T Male BSPT x Male BSPT Straight. Specify the required thread form and verify the mating connection.

Which of 0304C, 0306 and 0318 is identified as a cap?

0304C is captioned as a Female JIC Cap. Model 0306 is a JIC Bulkhead Lock Nut, and 0318 is a JIC Tube Nut. The captions do not identify 0306 or 0318 as line-blanking caps.

Does the listed pressure range apply to every shortlisted model?

The family records list a 3000–6000 PSI pressure range, but do not specify an individual rating and test condition for every model. A buyer should confirm the applicable model-specific pressure data rather than applying the family range automatically.

Product descriptions and material options in this article are based on the supplied product and application records. Model-level fit and rating depend on the applicable technical specification.

Tem questões ou precisa de mais detalhes?

Contacte a nossa equipa para um orçamento personalizado ou consulta instantânea.

Solicitar orçamento

Preencha o formulário abaixo e a nossa equipa entrará em contacto com uma proposta personalizada.

Anexar imagens, ficheiros ou documentos.

Responderemos dentro de 24 horas (Seg–Sáb).

Chat direto do WhatsApp

Prefere conversar em tempo real? Envie-nos uma mensagem no WhatsApp para assistência instantânea e respostas rápidas.

  • Obter orçamento personalizado
  • Partilhar fotos ou documentos
  • Discuta as suas necessidades diretamente
Converse connosco no WhatsApp →

Geralmente responde em 5–30 minutos durante o horário de expediente.

Suporte: Imagens, vídeos, PDF