N-Butyl Stearate Pairings for PVC: A Shortlist
N-Butyl Stearate Pairings for PVC: A Shortlist
For a PVC formulation, N-Butyl Stearate can be included in a shortlist with Epoxidized Soybean Oil (ESO), Dioctyl Adipate (DOA), Dibutyl Sebacate (DBS), Dioctyl Sebacate (DOS) and citrate esters—but the available product records do not establish that any particular pair improves lubrication or processing. The useful first step is to distinguish documented product identity and specifications from performance that still needs to be tested in the buyer’s own formulation.
This distinction matters because the assigned application material describes plastic and PVC processing, batch mixing and equipment such as mixers, kneaders, extruders and calenders. It also lists N-Butyl Stearate and several of the named additives among products related to that application. Those records support considering them in the same application-screening exercise; they do not provide blend ratios, controlled comparisons, PVC test results or proof that every combination is suitable.
Accordingly, this shortlist is a framework for evaluation, not a ranking of proven PVC internal lubricants. It uses supplier-listed product parameters to help identify what can be compared on paper, then sets out what a formulation trial should establish before a pairing is selected.
What the shortlist can—and cannot—establish
N-Butyl Stearate is the central candidate. The supplied product specification identifies it as N-Butyl Stearate, CAS 123-95-5, with a minimum content of 99.0%. It lists a colorless, transparent liquid appearance, slight odor, maximum acidity of 0.20 mgKOH/g, maximum moisture of 0.10%, density of 0.85 g/cm³ and a minimum flash point of 190°C. These are product-description and quality-screening details; they are not a complete measure of performance in PVC.
The related product records provide a similar set of identity and quality fields for several candidates. That makes it possible to compare selected documented characteristics, such as stated ester content, acidity, moisture and appearance. It does not make those materials interchangeable. Their specifications are not a shared test of lubricating effect, compatibility, processing window, finished-product quality or migration.
The application unit describes an additive being incorporated during production at controlled dosages, but does not state dosages for these products. It names high-speed mixers, kneaders, extruders, calenders and coating machines as matched equipment. Buyers can use those details to define a relevant trial setting, but should not treat them as evidence that a particular pairing has already been validated on any one machine.
Documented candidates at a glance
The table summarizes only attributes stated in the supplied product records. “Not stated” means the supplied record does not provide the value; it does not mean that the product lacks that property or capability. The values are not a performance comparison, and the different density entries should not be used to infer formulation suitability.
| Candidate | Documented product information | What the record does not establish |
|---|---|---|
| N-Butyl Stearate | CAS 123-95-5; content minimum 99.0%; acidity maximum 0.20 mgKOH/g; moisture maximum 0.10%; density 0.85 g/cm³; flash point minimum 190°C. | PVC lubrication results, dosage, blend compatibility or comparative processing performance. |
| ESO | CAS 8013-07-8; ester content minimum 99.0%; epoxy value minimum 6.0%; acidity maximum 0.5 mgKOH/g; density at 20°C 0.985–0.995 g/cm³; flash point minimum 280°C. | A demonstrated performance outcome when combined with N-Butyl Stearate. |
| DOA | CAS 123-79-5; ester content minimum 99.0%; density at 20°C 0.925–0.927 g/cm³; acid maximum 0.1 mgKOH/g; flash point minimum 195°C; moisture maximum 0.1%. | A validated role, blend ratio or processing advantage in the proposed pairing. |
| DBS | CAS 109-43-3; ester content minimum 99.0%; acidity maximum 0.10 mgKOH/g; moisture maximum 0.10%; density at 20°C 0.934–0.942 g/cm³. | PVC-specific internal lubrication data or a measured blend effect. |
| DOS | CAS 2432-87-3; ester content minimum 99.0%; density at 20°C 0.913–0.916 g/cm³; acidity maximum 0.10 mgKOH/g; flash point minimum 205°C; moisture maximum 0.1%. | Evidence that it outperforms or is compatible with N-Butyl Stearate in a specified PVC system. |
| TEC | CAS 77-93-0; purity minimum 99.0%; density at 20°C 1.135–1.139 g/cm³; acidity maximum 0.1 mgKOH/g; moisture maximum 0.25%; flash point minimum 155°C. | A verified PVC blend function or a result from pairing it with N-Butyl Stearate. |
| ATBC | CAS 77-90-7; ester content minimum 99.0%; density at 20°C 1.045–1.055 g/cm³; acidity maximum 0.1 mgKOH/g; moisture maximum 0.1%; flash point minimum 204°C. | A demonstrated outcome in a specific PVC formulation or a blend comparison. |
| TBC | Listed among the company’s main products and in the application unit’s related-product list. | A product specification in the supplied product-specification records, or pairing performance data. |
How to evaluate each pairing without assuming a result
N-Butyl Stearate with ESO: The supplied records identify both materials and provide separate quality parameters. They do not document a combined formulation result. For a trial, record the PVC formulation, the amount of each additive and the order of addition. Compare the blend with the existing control under the same mixing and processing conditions. Measure the outcomes relevant to the product being made rather than treating either material’s individual specification as evidence of a combined benefit.
N-Butyl Stearate with DOA: The DOA record supplies ester content, density, acidity, moisture and flash-point limits. These details can support incoming-material checks and help distinguish a documented lot from an acceptance specification. They do not identify DOA’s role in the proposed blend. The trial should therefore isolate whether adding DOA alongside N-Butyl Stearate changes the buyer’s specified processing or finished-product criteria, and whether any observed change is repeatable.
N-Butyl Stearate with DBS: DBS has stated limits for ester content, acidity and moisture, with density reported at 20°C. A buyer can use these values to specify which characteristics should appear on a certificate of analysis (COA). The available evidence does not compare DBS and N-Butyl Stearate in PVC or show a preferred ratio. Keep the test question narrow: does the proposed pairing meet the process and product requirements under the intended conditions?
N-Butyl Stearate with DOS: DOS has a supplier-listed ester-content minimum and other stated quality parameters. Those specifications offer a basis for documenting the material being tested, not for predicting blend performance. A useful evaluation should retain a control formulation and use the same equipment, material preparation and defined production conditions for each test. Record the result against pre-agreed acceptance criteria; do not infer suitability from a specification comparison alone.
N-Butyl Stearate with citrate esters: The supplied product records contain specifications for TEC and ATBC. TBC is listed in company and application information, but no corresponding product specification is provided in the supplied product-specification unit. Treat these as separate candidates, not as one interchangeable “citrate” option. For TEC or ATBC, verify the identity and lot-specific documents and test the actual blend. For TBC, first obtain the grade-specific specification needed for evaluation. None of the supplied records establishes a preferred citrate ester, compatibility, or a performance advantage in PVC.
Selection criteria for a PVC trial
A practical shortlist becomes useful when the buyer defines what the formulation must do. The application material names softening and toughening, lower melting point, ductility, fluidity, cold and flex resistance as potential functions in the broader application context. It does not attribute measured improvements to N-Butyl Stearate or to any listed pairing. Use those functions only as possible evaluation questions when they match the product’s requirements, not as expected outcomes.
- Confirm identity and grade. Match the product name and CAS number on the quotation, label, SDS and COA. For N-Butyl Stearate, the supplied specification gives CAS 123-95-5. Check that the accompanying documents and the purchased material refer to the same product and grade.
- Set lot acceptance limits. Identify which listed values matter to the buyer, such as content, acidity, moisture, color or appearance. Use the appropriate supplier documentation to confirm actual lot results. A stated minimum or maximum is an acceptance boundary in the product record, not a guaranteed result for every blend.
- Define the formulation and process. Record the PVC formulation, additive amounts, mixing sequence and relevant production equipment. The application unit mentions batch mixing and several processing equipment types, but provides no universal dosage or operating window. Establish conditions for the specific line and product.
- Use a controlled comparison. Compare the proposed pairing with a defined baseline while changing only the variable under evaluation where practicable. Record observable process and product criteria selected by the technical team. The supplied records contain no test method or threshold, so these must come from the project’s approved requirements.
- Review regulatory and end-use requirements separately. The application unit lists local chemical regulations and, as examples of special requirements, REACH, RoHS and food-grade certification. It does not demonstrate that each candidate or supplier meets those requirements for every application or market. Confirm the relevant jurisdiction, end use and supplier-specific documentation before qualification.
Where the evidence stops
The central limitation is the absence of validated combination data. The supplied material does not include comparative PVC tests for N-Butyl Stearate paired with ESO, DOA, DBS, DOS, TEC, ATBC or TBC. It also does not provide blend ratios, lubricant-effect measurements, migration results, compatibility results or a shared performance protocol. Consequently, this article cannot responsibly rank the pairings or describe one as the best choice.
Product specifications have a narrower role. They help buyers identify materials and define checks for incoming lots. They do not establish function in a formulation. Likewise, an application description that names several products in a PVC-related context does not show that those products were tested together, used in a particular commercial project or proven suitable for every PVC process.
This boundary is especially important when an application requires a particular finished-product or regulatory outcome. The application unit lists food-grade certification as a possible special requirement; this is not evidence that any listed material is approved for a specific food-contact use. Likewise, the presence of a product in a portfolio does not establish a low-volatility, non-toxic, environment-friendly, low-temperature or other performance claim. Confirm the exact end-use requirements and relevant evidence rather than relying on broad product labels.
Supplier documentation and qualification
SHANDONG KEXING GHEMICAL CO.,LTD lists N-Butyl Stearate, ESO, DOA, DBS, DOS, TEC and ATBC among the product information supplied for this article; TBC appears in the company’s main-product list. The supplied company background describes the business as a manufacturer of plasticizers, plastic and rubber flame retardants, and plastic additives. These portfolio facts identify a source for document requests; they do not verify any particular pairing’s performance.
For evaluation, request the current specification and lot documentation for each material included in the trial. Confirm that the product identifier, grade and quality limits align with the purchasing specification. If the project requires custom acceptance criteria or evidence of an end-use claim, ask for the specific supporting documentation and assess whether it covers the product, market and application in question. The supplied records do not provide a shared technical data package for the proposed blends.
SHANDONG KEXING GHEMICAL CO.,LTD’s supplied capability information states an OEM production mode, private labeling, a 1-ton minimum order quantity, a stated monthly capacity of 10,000T and a lead time of 30–45 days. It also describes incoming raw-material inspection and finished-product sampling tests. These are company-provided capability details, not independent validation of the blend candidates, and they do not establish a project-specific delivery commitment. Buyers should confirm the applicable product, quantity, schedule and documentation directly in the order qualification process.
Conclusion: shortlist for testing, not a performance ranking
For PVC internal-lubricant evaluation, the defensible shortlist is N-Butyl Stearate considered separately with ESO, DOA, DBS, DOS, TEC and ATBC; TBC can be added after its grade-specific specification is obtained. The supplied records support product identification and selected specification checks. They do not establish which combination works best, whether a particular pairing improves processing, or what dosage to use.
The decision should therefore be made in two stages: first qualify the identity and specification of each candidate, then compare the proposed formulation against a controlled baseline using project-defined process and product criteria. That approach preserves the value of a focused shortlist without turning incomplete blend evidence into a performance claim.
Frequently asked questions
Does the supplied information confirm that N-Butyl Stearate works with ESO in PVC?
No. The records identify N-Butyl Stearate and ESO and provide separate product parameters, but they do not report a combined PVC test, blend ratio or measured outcome.
Which listed co-additive is proven to pair best with N-Butyl Stearate?
None is proven best by the supplied evidence. The available specifications are not a comparative performance study, and no blend results are provided for ESO, DOA, DBS, DOS or the citrate esters.
What should a buyer check before comparing these pairings?
Confirm the product identity and grade, review the relevant supplier specification and lot documents, define the formulation and processing conditions, and set project-specific acceptance criteria. Compare candidates under controlled conditions rather than inferring performance from product specifications alone.
Are TEC, ATBC and TBC equally documented in the supplied records?
No. The product-specification records provide parameters for TEC and ATBC. TBC is named in company and application information, but the supplied product-specification unit does not provide a corresponding TBC specification.
Tem questões ou precisa de mais detalhes?
Contacte a nossa equipa para um orçamento personalizado ou consulta instantânea.
Solicitar orçamento
Preencha o formulário abaixo e a nossa equipa entrará em contacto com uma proposta personalizada.
Chat direto do WhatsApp
Prefere conversar em tempo real? Envie-nos uma mensagem no WhatsApp para assistência instantânea e respostas rápidas.
- Obter orçamento personalizado
- Partilhar fotos ou documentos
- Discuta as suas necessidades diretamente
Geralmente responde em 5–30 minutos durante o horário de expediente.
