Shortlisting ARF Antibacterial Board Models for Cleanrooms and Public Venues
Shortlisting ARF Antibacterial Board Models for Cleanrooms and Public Venues
For a cleanroom or high-traffic public venue, shortlist ARF Antibacterial Board by separating three decisions: whether the stated product properties meet the project requirements, which surface finish suits the space, and which of the available model sizes fits the panel layout. The four finish categories covered here are GFK-G high gloss, GFK-C coarse texture, GFK-M wood grain and GFK-L brushed texture. The manufacturer also lists GFK-Y special-shape and GFK-S sound-absorbing categories, but the available information does not provide enough comparative detail to rank those against the four finishes in this selector.
Zhejiang Aobang Technology Co., Ltd. (waiwaitree) describes itself as a developer and manufacturer of GFK materials. Company and product materials report Class A2 fire resistance, an antibacterial rate above 99.9%, Class 1 mildew resistance, corrosion resistance and a 25-year service life for its GFK antibacterial panels. These are supplier-reported claims, not a substitute for reviewing current, product-specific test reports and project requirements. For medical and cleanroom projects, the supplied application guidance specifically calls for checking antibacterial and VOC/formaldehyde test reports.
Start with the project constraint, not the finish name
A finish label identifies a surface appearance; it does not, by itself, establish a different fire rating, antibacterial result, chemical resistance or cleanroom qualification. The supplied product information lists several finishes but does not assign separate performance figures to GFK-G, GFK-C, GFK-M or GFK-L. Therefore, specifiers should first define the required evidence and environmental conditions, then use finish and size to refine the shortlist.
This order matters in hospitals, laboratories, pharmaceutical facilities and food facilities, where project specifications may address hygiene, fire performance, moisture, cleaning, emissions and installation details together. The application information identifies hospitals, schools, laboratories, pharmaceutical factories and food factories among relevant project types. It also says medical and cleanroom applications should verify antibacterial ratings and VOC/formaldehyde reports. A general product claim should not be treated as proof that a particular panel, finish, batch or installed assembly meets every project requirement.
For schools, banks and high-speed rail stations, the initial review can likewise begin with the stated project requirements for fire performance, cleaning, durability and appearance. The company describes its panels as washable, scratch-resistant, damp-proof and corrosion-resistant. Those characteristics can inform a specification review, but they do not replace project-specific checks of cleaning agents, exposure conditions, panel joints, supports and applicable construction requirements.
Shortlist the four finish categories by visual brief
The following is an appearance-led shortlist, not a performance ranking. The supplied product information names each finish category but does not provide gloss measurements, texture dimensions, color options, reflectance data or finish-specific test results. Treat the descriptions as category labels and confirm the actual sample or approved finish specification before final selection.
| Category | Stated finish | Shortlisting use | What to confirm |
|---|---|---|---|
| GFK-G | High gloss | Include when the design brief calls for a glossy surface. | Review a representative finish sample and confirm the specified color and surface in the project documents. |
| GFK-C | Coarse texture | Include when a visibly textured surface is desired. | Confirm the actual texture and cleaning requirements with the project team; no texture-specific cleaning result is supplied. |
| GFK-M | Wood grain | Include when the design brief specifies a wood-grain appearance. | Confirm the selected pattern and color against an approved sample; no pattern range is listed in the available data. |
| GFK-L | Brushed texture | Include when the design brief calls for a brushed-texture appearance. | Confirm sample, color and orientation requirements; the supplied information does not specify directional installation rules. |
For a cleanroom, finish selection should follow rather than replace the hygiene and emissions review. The available information does not establish that one of these four finishes is more hygienic, easier to disinfect or more suitable for a cleanroom than another. Where the room specification names a cleaning regime or surface requirement, assess the chosen finish against that documented requirement and the relevant product evidence.
For a school, bank, station or other public interior, the appearance brief may be the main reason to distinguish among the four categories. The manufacturer describes the board as color-stable and non-fading, but the supplied materials do not state a test method, exposure period or finish-specific color-change value. Keep that distinction visible in procurement documents: a general product statement is not a measured guarantee for every finish and environment.
Match the listed model size to the panel layout
The ARF Antibacterial Board model list runs from 300×300 to 600×1500. The listed sizes are 300×300, 300×600, 300×900, 300×1200, 600×600, 600×900, 600×1200 and 600×1500. The source does not state a unit alongside these model dimensions, so retain the model notation as supplied and confirm the unit and finished dimensions in the quotation and approved shop drawings.
- 300×300: a listed compact-format option. Check how it fits the planned module, joints and edge details.
- 300×600 and 300×900: listed rectangular options. Compare them with the intended panel grid and the project’s cutting and joint layout.
- 300×1200: the longest listed model in the 300-wide group. Confirm handling, support and installation details in the approved design.
- 600×600: a listed square-format option. Check alignment with adjacent panels and the room’s module.
- 600×900 and 600×1200: listed formats for layouts requiring a larger panel face. Review joint spacing and supporting-system details.
- 600×1500: the largest listed model by the supplied dimensions. Confirm whether it suits the project’s access, handling and installation plan.
This mapping is a practical way to organize a request for samples or technical review; it is not a claim that a particular size is required for a named facility. The product information does not give panel thickness, tolerances, weight, maximum unsupported span or size-specific performance. Those items should be resolved against the project drawings and manufacturer’s technical documentation before the model is written into a final schedule.
Use performance claims as document checks
The company’s materials report Class A2 fire resistance, an antibacterial rate above 99.9%, Class 1 mildew resistance, corrosion resistance and a 25-year service life. Its company profile also describes acid-alkali resistance and oxidation resistance. These claims can define what to ask the supplier to substantiate, but the supplied corpus does not include the underlying certificates, test methods, test dates, sample configurations or conditions. Avoid treating a headline property as universal proof for every size, finish or installed assembly.
For cleanroom and medical applications, request the antibacterial and VOC/formaldehyde reports called for in the application guidance. Confirm that the document identifies the relevant product and test scope, and compare its method and result with the project specification. For fire performance, obtain the applicable product evidence and check the classification and scope against the project’s requirements. For corrosion resistance, clarify the anticipated exposure and seek evidence relevant to that environment rather than assuming that a general claim covers every chemical or concentration.
The board is described as being made from polyester resin, glass fiber and filler; another product description specifies glass fiber, flame-retardant resin, aluminium hydroxide and silver-containing antibacterial agents. The stated surface process is high-temperature demoulding and one-piece online lamination forming. Those material and process descriptions help identify the product being reviewed, but do not independently establish a compliance result. Keep product identity, finish, model and report scope together when comparing submittals.
The 25-year service-life statement is a company claim. The information supplied does not define a service-life calculation, maintenance conditions, environmental limits or warranty coverage. A specifier should therefore distinguish this stated service life from a contractual warranty and confirm the conditions behind the claim before using it in lifecycle planning.
Interpret installation savings within the complete system
The company profile states that the complete supporting installation system reduces installation cost by 20% and construction cycles by 15%. These figures refer to the complete supporting system, not to the board alone. The supplied information does not provide the comparison baseline, project sample, calculation method or site conditions, so the percentages should be treated as company-reported figures rather than guaranteed outcomes for an individual project.
The application material lists keel or bracket systems, sealants and fireproof fittings as common supporting items. It also says that exact accessories should be determined according to construction norms and project requirements, and that installation methods and system integration should follow the project design and manufacturer guidance. For a project estimate, compare the full panel-and-accessory scope, labor assumptions and construction sequence on a like-for-like basis. Do not transfer the stated reductions to a different installation configuration without supporting project evidence.
The manufacturer also describes the panels as reusable, with high utilization, and as not deforming during dismantling. These statements may be relevant when a project is considering future removal or reuse, but the available information gives no reuse-cycle count, inspection criteria or recovery rate. Include reuse as a potential design consideration only after confirming the dismantling method and the acceptance criteria for the intended second use.
Application-led shortlist examples
Hospital or laboratory: Begin with the project’s required fire, antibacterial and emissions evidence. Then select among GFK-G, GFK-C, GFK-M and GFK-L according to the approved surface brief, and choose a listed size that can be coordinated with the wall or ceiling layout. The available application guidance supports considering these environments, but requires verification of antibacterial and VOC/formaldehyde reports for medical and cleanroom scenarios.
Pharmaceutical or food facility: Treat the stated damp-proof, mildew-resistance and cleanability properties as issues for technical review, not as a substitute for facility-specific hygiene specifications. Confirm the reports and cleaning conditions applicable to the actual project, then make the finish decision based on the approved sample and schedule.
School, bank or high-speed rail station: First coordinate the model size with the interior module and installation design. Then select the surface appearance that meets the project brief. The company identifies schools, banks and high-speed-rail stations as high-traffic public venues for its panels; that application statement does not itself verify a particular project installation or outcome.
Sourcing assurance and qualification limits
Zhejiang Aobang Technology Co., Ltd. reports a 20,000 m² plant and ISO environmental-management and quality-management system certifications. These are useful starting points for supplier qualification, not independent confirmation of current certificate status or product compliance. The supplied evidence does not specify certificate numbers, issuing bodies, certified site and scope, or validity dates. Request current certificates and check that the covered entity, site and scope are relevant to the procurement.
For the same reason, keep supplier qualification separate from panel selection. A factory-area figure and management-system certificates do not establish the test performance of a particular finish, nor do they confirm that a specified model meets a project’s fire, emissions or hygiene criteria. A complete review pairs the supplier’s current documents with model-specific reports, the selected finish and size, and the installation details.
Decision rule: build a shortlist that can be verified
A practical shortlist can be recorded in four linked fields: application and required evidence; finish category and approved sample; model size and drawing reference; and supporting-system assumptions. For cleanrooms, include the antibacterial and VOC/formaldehyde checks identified in the application guidance. For other venues, record the project’s relevant fire, cleaning, moisture or exposure requirements rather than assuming that all buildings share the same criteria.
On the information available, GFK-G, GFK-C, GFK-M and GFK-L are distinguishable by their named surface finishes, while the eight listed model sizes provide format options for design coordination. The supplied facts do not establish a performance hierarchy among those four finishes or identify one universally preferred size. The defensible choice is therefore the finish and model that fit the documented design brief, with required claims confirmed by current, appropriately scoped evidence.
Frequently asked questions
What ARF Antibacterial Board sizes are listed?
The listed models are 300×300, 300×600, 300×900, 300×1200, 600×600, 600×900, 600×1200 and 600×1500. The source does not state a unit with these model dimensions, so confirm the unit and finished dimensions in the technical documents.
How do GFK-G, GFK-C, GFK-M and GFK-L differ?
The supplied category names identify GFK-G as high gloss, GFK-C as coarse texture, GFK-M as wood grain and GFK-L as brushed texture. The available information does not give finish-specific performance data or establish that one category is more suitable for a cleanroom than another.
Which reports should be checked for a cleanroom project?
The application guidance says to verify antibacterial-rating and VOC/formaldehyde test reports for medical and cleanroom scenarios. The project team should also confirm the product-specific fire and other evidence required by its own specification; the supplied materials do not include those report documents.
Are the stated 20% installation-cost and 15% construction-cycle reductions guaranteed?
No project-specific guarantee is established by the supplied information. The company attributes both reductions to its complete supporting installation system, but does not provide a comparison baseline or calculation method. Treat them as company-reported figures and assess the actual project scope separately.
Tem questões ou precisa de mais detalhes?
Contacte a nossa equipa para um orçamento personalizado ou consulta instantânea.
Solicitar orçamento
Preencha o formulário abaixo e a nossa equipa entrará em contacto com uma proposta personalizada.
Chat direto do WhatsApp
Prefere conversar em tempo real? Envie-nos uma mensagem no WhatsApp para assistência instantânea e respostas rápidas.
- Obter orçamento personalizado
- Partilhar fotos ou documentos
- Discuta as suas necessidades diretamente
Geralmente responde em 5–30 minutos durante o horário de expediente.
