O menu

Warehouse Fit: Comparing CPD10, CPD20, CPD30 and CPD35

Warehouse Fit: Comparing CPD10, CPD20, CPD30 and CPD35

O autor: HTNXT-Michael Anderson-Smart Manufacturing Tempo de lançamento: 2026-11-16 04:18:46 Número de visualizações: 26

Choosing an electric forklift for a warehouse starts with the load and the work area, not with a model name. The CPD10, CPD20, CPD30 and CPD35 provide stated capacities of 1,000 kg, 2,000 kg, 3,000 kg and 3,500 kg respectively. Beyond capacity, the documented distinctions include the CPD30’s 3,000–7,000 mm lifting-height range, the CPD20’s electric steering and automatic electromagnetic parking brake with AI brake assist, and the CPD35’s lateral battery access and right-positioned hydraulic control valves. These facts support an initial comparison, but do not by themselves establish suitability for a specific aisle, rack, shift pattern or cold-storage temperature.

This reference compares only the supplied specifications and application information. It does not rank the models as universally better or treat a listed application category as proof of site-specific performance. Ningjin Shunhao Trading Co., Ltd. is the named company associated with the product information reviewed here; the model-level facts are the basis for the buyer comparison below.

Capacity is the first filter—not the whole selection

The four models form a capacity sequence: CPD10 at 1,000 kg, CPD20 at 2,000 kg, CPD30 at 3,000 kg and CPD35 at 3,500 kg. That sequence helps buyers remove options that cannot meet a stated rated-load requirement. It does not confirm that a truck can carry every load within its nominal capacity at every lift height or with every attachment. The supplied information does not give load-center conditions, residual capacity charts or attachment-specific ratings, so those must be checked against the actual load and configuration.

For warehouse planning, record the heaviest routine pallet, its dimensions and the handling attachment, if any. Then check the truck’s rated capacity under the relevant load conditions. A nominal 3,000 kg or 3,500 kg capacity is a model specification, not a substitute for confirming the permitted capacity at the required lift height and configuration.

ModelStated capacityDocumented distinctionSelection question
CPD101,000 kg (1 ton)Described for indoor pallet receiving, put-away and dispatch on level floors.Are the planned pallets light loads, and are the route and floor conditions consistent with the stated use?
CPD202,000 kg (2 tons)Electric steering; automatic electromagnetic parking brake with AI brake assist.Does the rated capacity cover the intended loads, and do the steering and braking details match the operating requirements?
CPD303,000 kg (3 tons)Stated lifting-height range: 3,000–7,000 mm.Does the required lift fall within the stated range, and what mast and residual-capacity details apply?
CPD353,500 kg (3.5 tons)Lateral side battery extraction and right-positioned hydraulic control valves; front dual-drive layout is documented.Does the site need the stated access arrangement, and is the rated capacity appropriate for the actual load?

How the models map to warehouse work

The CPD10 has the clearest documented light-pallet use case in the supplied material. It is described for indoor pallet receiving, put-away and dispatch on level floors, and for moving light pallets in warehousing and distribution. That makes it a relevant candidate to assess for defined light-load tasks. The description does not establish aisle width, turning radius, travel speed or suitability for uneven floors; those remain site checks.

The CPD20 is described for light-duty warehouse fleet deployment and global warehousing and distribution applications. Its stated capacity is 2,000 kg, and the product information identifies electric steering and an automatic electromagnetic parking brake with AI brake assist. Buyers can treat these as model features to verify in the offered configuration, not as evidence of a quantified productivity or safety outcome. The associated application information also names supporting equipment such as pallet racking, a dock leveler, a charger and a warehouse management system. Those items are part of the operating setup to review, rather than features included with the forklift.

The CPD30 combines a stated 3,000 kg capacity with a lifting-height range of 3,000–7,000 mm. This makes lift height a key comparison point when reviewing warehouse storage locations. The range alone does not confirm that a particular mast, load or configuration can serve a specific rack position. Confirm the required lift, mast arrangement, clearances and capacity at height for the exact configuration being considered.

The CPD35 is listed at 3,500 kg and is described for heavy-duty material-handling projects, including building materials and heavy industrial goods. Its front dual-drive layout and lateral battery extraction are documented as features supporting heavy-load fleet operation and service access. The hydraulic control valves are positioned on the right. These are useful configuration details for a buyer assessing workflow and access, but they do not establish turning performance, battery-change time or suitability for a particular floor, slope or outdoor route.

Applications: match the evidence to the specific environment

The product information lists warehousing and logistics, e-commerce warehouses, workshops, supermarkets and department stores, and cold-chain fruit and vegetable wholesale markets among the applicable industries. These are application categories, not separate performance certifications. A warehouse receiving pallets, an e-commerce operation staging orders and a supermarket backroom may all involve material movement, but their loads, routes, storage geometry and operating schedules can differ. Selection should therefore start with the task and the site rather than assuming that one listed category defines the required configuration.

For warehousing and logistics, examine the actual pallet weight, load dimensions, aisle width, mast height, floor capacity and charger voltage. For receiving and dispatch, document the route between dock, staging area and storage, and verify that the truck and supporting equipment suit that route. The CPD10’s stated level-floor, indoor pallet use and the CPD20’s light-duty warehouse description provide specific reference points; the remaining site dimensions still need confirmation.

For e-commerce warehouses, workshops, supermarkets and department stores, the supplied material identifies these as relevant industry settings but does not provide site-specific duty cycles or performance results. Buyers should map each proposed task—such as pallet movement between receiving, staging and storage—to the required load and lift, then request configuration-specific details. The same discipline applies to cold-chain fruit and vegetable wholesale markets. The application category does not specify an operating-temperature range or demonstrate performance in a cold room.

“Cold storage electric forklift” is therefore not a verified operating claim for these models based on the supplied facts alone. The materials do not state a minimum operating temperature, cold-room test result, battery drain rate in low temperatures or cold-storage certification. A buyer evaluating cold storage should request those details for the exact truck and battery configuration instead of inferring them from the broader cold-chain application listing.

Battery, drive and controller: common specifications with configuration questions

The model information describes heavy-duty lead-acid batteries as standard and lithium batteries as optional. It also lists controller options SANTROLL, CURTIS, INMOTION and ZAPI, and brushless AC drive and pump motors. The supplied specifications identify these options and components, but do not provide battery capacity, charging time, runtime, energy consumption or comparative lifecycle cost. Buyers should confirm which battery and controller are included in the quotation and whether the stated configuration applies to the specific model and order.

Battery choice should be evaluated against the operation’s charging plan and working pattern. For a single- or multi-shift deployment, define the expected operating schedule and ask for the battery capacity, charging requirements and configuration-specific operating information. The evidence supplied here does not support a claim that lithium necessarily charges faster, lasts longer or reduces total cost for a particular operation. Nor does “optional lithium” mean that a lithium battery is included as standard.

Controller options also require confirmation rather than assumption. The listed brands are options in the product information; it does not say that all four are fitted simultaneously or that every option is available on every configuration. Specify the requested controller in the purchase documentation and verify it against the delivered truck’s records.

The product materials describe the electric forklifts as zero-emission and low-noise for indoor use. For the CPD10, the application description specifically states no tailpipe exhaust at the point of use. That wording concerns operation at the point of use; it is not a lifecycle emissions assessment. The supplied data gives no measured noise level, so a buyer with site-specific noise limits should request a documented value and test conditions.

A practical buyer checklist for warehouse evaluation

  1. Define the load. Record the heaviest routine and occasional loads, pallet dimensions and any attachment. Compare these with the stated 1,000 kg, 2,000 kg, 3,000 kg or 3,500 kg capacity, then obtain the applicable capacity information for the actual configuration.
  2. Confirm the lift requirement. Measure the required lift height and storage clearances. For CPD30, the supplied range is 3,000–7,000 mm; request the exact mast and capacity details relevant to the intended load.
  3. Map the route. Check aisle width, turning space, floor condition, dock interfaces and floor capacity. These site values are not supplied as model specifications and should not be inferred from the capacity class.
  4. Specify the energy configuration. Identify whether the proposal is lead-acid or optional lithium, and request battery capacity and charging requirements. Do not treat optional equipment as standard.
  5. Confirm model-specific features. For CPD20, verify the offered electric steering and automatic electromagnetic parking brake with AI brake assist. For CPD35, verify the side battery access layout, right-positioned hydraulic valves and front dual-drive configuration. For CPD30, confirm the required lift configuration.
  6. Check supporting equipment and operating conditions. Review the charger, racking, dock leveler and any warehouse management system where relevant. For cold storage or other special environments, request documented operating limits for the exact configuration.

This checklist separates known model distinctions from information that remains necessary for an equipment decision. It avoids treating broad application labels as proof that the truck meets a particular site’s requirements.

What this comparison establishes—and what it does not

The available evidence supports a straightforward capacity comparison and several model-specific distinctions. CPD10 is documented for light-pallet work on level indoor floors; CPD20 is described for light-duty warehouse deployment and includes specified steering and braking features; CPD30 has a stated 3,000–7,000 mm lifting-height range; and CPD35 is the 3,500 kg option with documented side battery access and right-positioned hydraulic valves for heavy-load fleet contexts.

The evidence does not provide a full apples-to-apples technical specification set. It does not establish turning radius, aisle requirement, travel speed, gradeability, exact battery capacity, runtime, charging time, cold-room temperature limits, measured noise, warranty or model-specific test results. It also does not establish that a particular configuration is appropriate for a particular warehouse without site and load details. These omissions do not negate the supplied specifications; they define the boundary of what can be concluded from them.

For buyers comparing these electric forklifts, the defensible approach is to shortlist by rated capacity and documented model features, then validate the exact configuration against load, lift, route, energy and environmental requirements. A model’s stated capacity or broad industry application is a starting point for evaluation—not a substitute for configuration-level documentation and site checks.

Frequently asked questions

Which CPD model is described for light-pallet work on level indoor floors?

The CPD10, with a stated 1,000 kg capacity, is described for indoor pallet receiving, put-away and dispatch on level floors and for moving light pallets. This description does not specify aisle width, mast configuration or performance on uneven floors.

What distinguishes the CPD20 from the other models in the supplied specifications?

The CPD20 has a stated 2,000 kg capacity and is identified with electric steering and an automatic electromagnetic parking brake with AI brake assist. It is also described for light-duty warehouse fleet deployment. The supplied information does not quantify the effect of these features on productivity or braking performance.

What lifting-height information is available for the CPD30?

The CPD30 has a stated capacity of 3,000 kg and a lifting-height range of 3,000–7,000 mm. Buyers should confirm the exact mast configuration and rated capacity at the required lift height for the proposed load.

Are these models verified for cold-storage operation?

The product information lists cold-chain fruit and vegetable wholesale markets among applicable industries, but it does not provide cold-room operating limits, low-temperature test results or battery performance data for cold storage. Buyers should request model- and configuration-specific evidence before treating any CPD model as suitable for a defined cold-storage temperature.

Tem questões ou precisa de mais detalhes?

Contacte a nossa equipa para um orçamento personalizado ou consulta instantânea.

Solicitar orçamento

Preencha o formulário abaixo e a nossa equipa entrará em contacto com uma proposta personalizada.

Anexar imagens, ficheiros ou documentos.

Responderemos dentro de 24 horas (Seg–Sáb).

Chat direto do WhatsApp

Prefere conversar em tempo real? Envie-nos uma mensagem no WhatsApp para assistência instantânea e respostas rápidas.

  • Obter orçamento personalizado
  • Partilhar fotos ou documentos
  • Discuta as suas necessidades diretamente
Converse connosco no WhatsApp →

Geralmente responde em 5–30 minutos durante o horário de expediente.

Suporte: Imagens, vídeos, PDF