{{ variable.name }}
Product Summary
The SLTPB-16/10-40 is the largest capacity in Sollant's single-stage high-pressure booster series, delivering 16 Nm³/min at 4.0 MPa discharge from a 1.0 MPa inlet. In process plants it is placed after a screw or centrifugal compressor stage to top up a high-flow, high-pressure supply train, rather than to serve a single machine. This is the configuration used where a large process installation needs more high-pressure gas than the base compressor can provide on its own.
Petrochemical sites commonly involve high ambient temperatures, corrosive gas, flammable or explosive areas and outdoor installation. Operation is continuous, and the booster is normally matched with an air filter and air dryer upstream. Project specifications for this duty typically call for explosion-proof design, pressure stabilization and corrosion-resistant materials; confirm the exact execution required for your plant before ordering.

The top capacity of the 3.0 to 16 Nm³/min range, sized for plant-level high-pressure demand instead of a single consumer.
A single compression stage takes air already at 1.0 MPa up to 4.0 MPa, so the existing instrument air system stays as it is.
Paired with centrifugal or screw compressors, the booster completes a high-flow, high-pressure gas supply arrangement for large process installations.
Cast iron, aluminium alloy and stainless steel internals support long-term, continuous operation with low maintenance cost.
A stable high-pressure supply supports pressure-sensitive process and instrument air consumers downstream.
An intelligent control system with multiple safety protection features keeps the unit stable and safe during unattended running.
| Parameter | SLTPB-16/10-40 |
|---|---|
| Model | SLTPB-16/10-40 |
| Capacity | 16 Nm³/min |
| Suction pressure | 1.0 MPa |
| Discharge pressure | 4.0 MPa |
| Compression stage | 1 |
| Speed | 710–790 rpm |
| Motor power | Series ratings from 15 kW to 2×30 kW; the rating of this build is confirmed against the process duty |
| Weight | Series range 560–2100 kg; unit weight confirmed on order |
| Materials | Cast iron, aluminium alloy, stainless steel |
| Operation | Continuous operation; upstream air filter and air dryer recommended |
| Model | Capacity (Nm³/min) | Suction | Discharge |
|---|---|---|---|
| SLTPB-3.0/10-40 | 3.0 | 1.0 MPa | 4.0 MPa |
| SLTPB-4.0/10-40 | 4.0 | 1.0 MPa | 4.0 MPa |
| SLTPB-6.0/10-40 | 6.0 | 1.0 MPa | 4.0 MPa |
| SLTPB-8.0/10-40 | 8.0 | 1.0 MPa | 4.0 MPa |
| SLTPB-10/10-40 | 10 | 1.0 MPa | 4.0 MPa |
| SLTPB-12/10-40 | 12 | 1.0 MPa | 4.0 MPa |
| SLTPB-16/10-40 | 16 | 1.0 MPa | 4.0 MPa |
Flow is the only variable across the series: every model shares the /10-40 designation of 1.0 MPa inlet and 4.0 MPa discharge. Plants with several high-pressure consumers usually select 12 or 16 Nm³/min, or run two units in parallel. Published series motor ratings are 15 kW, 2×15 kW, 15+22 kW, 22 kW, 2×22 kW, 30 kW and 2×30 kW.
The frame and compression end are cast iron for rigidity and heat rejection, with aluminium alloy and stainless steel used in the flow path and trim. A single-stage layout limits the number of moving assemblies, which is what allows smooth running with minimal noise and vibration on a continuously operated skid. The compact footprint simplifies layout inside a crowded process area and keeps transport and commissioning straightforward.
Petrochemical process air and high-pressure gas supply are the primary duties, including high-flow, high-pressure boosting downstream of centrifugal or screw compressors. The 4.0 MPa platform is also used for PET bottle blowing, laser cutting and fire protection systems, and for drilling support work such as high-pressure gas injection, airtightness testing and deep-drilling assistance.
Sollant supports OEM/ODM customization on its compressed air equipment. Units are covered by an air compressor CE declaration of conformity (ECM, certificate 0P230209.SSE0Q23, valid until 8 February 2028, referencing EN ISO 12100:2010, EN 60204-1:2018 and EN 1012-1:2010) and the company holds ISO 14001:2015 certification (NOA, 05126E00664R053). Original spare parts and 24/7 engineering after-sales support are available.
Explosion-proof execution is a project-specific requirement in petrochemical duty. The documentation supplied with this series does not list an explosion-proof certificate, so please state your hazardous-area classification and the documents required, and our engineers will confirm what can be supplied.
16 Nm³/min at 4.0 MPa discharge from 1.0 MPa suction, single stage, running at 710–790 rpm.
Yes. High-pressure boosters are used downstream of centrifugal or screw compressors to complete a high-flow, high-pressure gas supply train for large process installations.
Explosion-proof design is a common specification in petrochemical projects. The documentation provided here does not list an explosion-proof certificate, so send your hazardous-area classification and we will confirm the available execution.
The series material list covers cast iron, aluminium alloy and stainless steel. Stainless steel is used in the flow path and trim; share the gas composition and we will confirm the suitable material combination.
In petrochemical service the booster is normally matched with an air filter and air dryer, and the site requirement also calls for pressure stabilization. Confirm the treatment chain with our engineers when specifying the system.
Yes. Continuous operation is the standard duty for this series, supported by an intelligent control system and multiple safety protection features.
Series ratings run from 15 kW to 2×30 kW with weights of 560 kg to 2100 kg. The exact figures for the 16 Nm³/min build are confirmed against the process duty at quotation.
Tell us the gas handled, inlet and required discharge pressure, flow, hazardous-area classification, ambient conditions and the upstream compressor type. Our engineers will confirm the model, materials and documentation package.
| Suggested file name | Alt text |
|---|---|
| booster-air-compressor-sltpb-16-petrochemical.png | SLTPB-16/10-40 high-capacity booster air compressor module for process plant installation |
| booster-air-compressor-sltpb-16-skid-layout.png | Skid layout and connections of the 16 Nm³/min booster air compressor |