O menu

185 kW Two Stage PM VSD Air Compressor for 24/7 Manufacturing

Inventário:
SKU: 3824034743
Modelo: SLTT-22V、SLTT-30V、SLTT-37V、SLTT-45V、SLTT-55V、SLTT-75V、SLTT-90V、SLTT-110V、SLTT-132V、SLTT-160V、SLTT-185V、SLTT-220V、SLTT-250V

{{ variable.name }}

{{ value.name }}
SLTT-V Two Stage PM VSD Series

185 kW Two Stage PM VSD Air Compressor for 24/7 Manufacturing

A two-stage permanent magnet variable frequency air compressor for factories that need stable pressure, lower energy costs and continuous duty. The 185 kW project case in Indonesia has been in service since 2020.

22–250 kW series8–13 bar1.36–53.68 m³/minUp to 40% energy saving
Two stage PM VSD air compressor unit for 24/7 manufacturing
Two-stage PM VSD air compressor for continuous manufacturing duty.

Product Summary

The 185 kW two-stage PM VSD air compressor is built for automated production lines that cannot tolerate pressure swings. Two-stage compression lowers the compression ratio at each stage, reduces internal leakage and bearing load, and supports a longer air-end service life. In the Indonesia project, one 185 kW unit has supplied pneumatic equipment, assembly lines, packaging machinery and instrument air for more than five years.

Key Features

Two-stage compression

Lower stage compression ratio, reduced internal leakage and bearing load, higher volumetric efficiency and longer host life.

15% more displacement

Two-stage PM VSD replaces single-stage compression and increases displacement by nearly 15%, adding up to 15% energy saving.

Patented UV rotor profile

The rotor is refined by more than 20 procedures to ensure profile accuracy, reliability and effectiveness.

Up to 40% energy saving

Compared with ordinary industrial frequency machines. At 8,000 h/year, the saving can reach about USD 30,000 per year.

Integrated shaft structure

The motor and male rotor use one shaft, eliminating coupling and gear transmission and reducing related failure risk.

Low noise and vibration

No motor, bearing, gear or coupling noise; noise range for the series is 65–78 ±3 dB.

Technical Specifications

ParameterSpecification
Model familySLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V, SLTT-250V
Project case power185 kW
Working pressure8–13 bar
Capacity1.36–53.68 m³/min (series range)
Power range22–250 kW
Horsepower30–335 hp
Noise65–78 ±3 dB
Air outlet pipe diameterDN40, DN50, DN65, DN100
Net weight732–6000 kg (series range)
CompressionTwo-stage compression
DrivePermanent magnet variable frequency drive
Rotor profilePatented UV profile, refined by more than 20 procedures
MaterialsCast iron, stainless steel

Models and Options

The SLTT-V series covers 13 models from SLTT-22V to SLTT-250V, with 22–250 kW power, 8–13 bar working pressure and 1.36–53.68 m³/min capacity range. The Indonesia case uses a 185 kW unit. Final model selection depends on required air flow, pressure, duty cycle and site conditions.

Materials and Structure

The air end uses a patented UV rotor profile and two-stage compression structure. Cast iron and stainless steel are used in the construction. The PM VSD motor and male rotor adopt an integrated shaft structure, so there is no coupling or gear transmission. This compact arrangement reduces efficiency loss and mechanical failure points.

Low noise and low vibration are achieved by removing motor, bearing, gear and coupling noise sources. The integrated PM VSD structure also saves floor space, which matters in dense production workshops.

Applications

This 185 kW class unit suits continuous manufacturing plants that need stable power air and clean instrument air. Typical duties include:

  • Pneumatic equipment such as cylinders, pneumatic clamps and actuators on automated production lines.
  • Automated assembly lines, packaging machinery and spraying equipment requiring steady air volume.
  • Clean instrument air for precision instruments and automated control systems.
  • Automotive, machinery manufacturing, rubber and plastics, and textile plants.

Customization

Sollant supports OEM/ODM customization. Project requirements can be discussed around the SLTT-V model, working pressure within 8–13 bar, air outlet size, and matched refrigerated dryer or precision filter configuration. Sollant was founded in 2004 and operates a 30,000 ㎡ facility with 20,000 units annual output.

Case Study

Indonesia manufacturing plant — 185 kW unit in service since 2020

A manufacturing plant in Indonesia purchased one 185 kW two-stage screw air compressor in 2020. The unit supplies continuous power air for pneumatic equipment, automated assembly lines, packaging machinery and spraying equipment, and clean instrument air for precision instruments and control systems.

After more than five years of continuous service, the plant reports lower electricity costs than with traditional single-stage compressors, stable pressure for 24/7 production, low failure rate in a hot and humid environment, and low noise and vibration.

FAQ

Q: What makes the 185 kW Indonesia case relevant to my plant?

It shows a 185 kW two-stage unit running in a hot, humid factory for over five years on continuous production. The application covered pneumatic equipment, assembly lines, packaging, spraying and instrument air.

Q: How does two-stage compression save energy?

It reduces the compression ratio per stage, internal leakage and bearing load. Two-stage PM VSD can increase displacement by nearly 15% and save up to 40% versus ordinary industrial frequency machines.

Q: Which models are available?

The SLTT-V series includes SLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V and SLTT-250V.

Q: What pressure and capacity can the series cover?

Working pressure is 8–13 bar. Capacity range is 1.36–53.68 m³/min across the series. The exact model is selected against your air demand and duty cycle.

Q: What certifications are available?

Sollant's related certification set includes CE for air compressors, CE for permanent magnet motors, EMC for the controller, PED verification for oil and air tanks, and ISO 14001 environmental management.

Q: Can the unit be customized?

Yes. OEM/ODM support is available. Model, pressure within the series range, outlet size and matched air treatment can be specified for project requirements.

Q: What after-sales support is available?

Sollant provides 24/7 engineering after-sales support and original spare parts through its international service team.

Inquiry Information

Send your required model, working pressure, capacity, site conditions and destination country to info@sollant.com. Tel or WhatsApp: +86 155-8905-3798. Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.

Discuss Your Project

Image Filename and Alt Suggestions

  • two-stage-air-compressor-185kw-24-7-plant.png — Alt: Two stage PM VSD air compressor unit for 24/7 manufacturing plant duty.
  • two-stage-pm-vsd-compressor-series.png — Alt: Sollant two-stage PM VSD air compressor from the SLTT-V series.
  • two-stage-air-compressor-indonesia-case.png — Alt: Two-stage air compressor configured for continuous factory air supply.

SEO Title: 185 kW Two Stage PM VSD Air Compressor for 24/7 Manufacturing | Sollant

Meta Description: 185 kW two-stage PM VSD air compressor for 24/7 manufacturing. Series covers 22–250 kW, 8–13 bar, with up to 40% energy saving and Indonesia case support.

URL Slug: 185kw-two-stage-pm-vsd-air-compressor