2009.6Wh LiFePO4 Portable Power Station With 1000W Pure Sine Wave AC Output
A single-configuration portable power station built on a 2009.6Wh LiFePO4 battery pack, with 1000W pure sine wave AC output, AC mains charging up to 1000W and MPPT solar input from one 150–550W panel.
2009.6Wh · 314Ah1000W Pure Sine WaveMPPT 15–60VdcIP21 IndoorUN38.3 Tested Pack
KJ-641000W portable power station, 2009.6Wh LiFePO4 configuration
Product Summary
Model KJ-641000W is a portable power station designed for household emergency backup, camping, off-grid sites and mobile working power. The battery section uses LiFePO4 cells with a nominal voltage of 6.4Vdc, a rated capacity of 314Ah and 2009.6Wh of stored energy, so the unit can support longer supply periods than small-capacity units. The AC stage delivers a rated 1000W pure sine wave output at 185–230Vac / 50Hz, which is the waveform sensitive household appliances and electronic devices expect. Charging is handled either from the AC mains at up to 1000W maximum charging power, or from one solar panel in the 150–550W range through an MPPT window of 15–60Vdc. The unit measures L430×W296×H157mm at 20kg net weight and is rated IP21 for indoor installation.
Key Features
2009.6Wh LiFePO4 Bank
314Ah rated capacity at 6.4Vdc nominal voltage gives a larger energy reserve for backup and off-grid duty, with a 5.8–7.2Vdc operating window.
1000W Pure Sine Wave
Rated AC output of 1000W in pure sine wave at 185–230Vac / 50Hz supports household appliances and electronics that require a clean waveform.
AC + MPPT Solar Charging
AC charging up to 1000W max, plus one solar panel of 150–550W with MPPT range 15–60Vdc and 550W max solar charge power.
Multi-Port Output
Three 12V 2.5A DC jacks (5.5×2.1mm), one USB 5V 1A port and one Type-C 5V 1A port allow several small loads to run at the same time.
BMS Protection Suite
An intelligent BMS protects the pack against overcharge, over-discharge, over-current and over-temperature during charge and discharge cycles.
Compact 20kg Housing
Integrated portable format at L430×W296×H157mm, 20kg net and 21.6kg gross, easy to move, store and ship indoors.
Technical Specifications
Model
KJ-641000W
Rated AC output power
1000W
Output waveform
Pure sine wave
Output voltage / frequency
185–230Vac, 50Hz
Nominal input voltage
230Vac
Max AC input voltage
300Vac
Nominal input frequency
45–65Hz
Max AC charging power
1000W max.
Low cut-off / recovery voltage
90Vac / 170Vac ±7 · 100Vac / 180Vac ±7
High cut-off / recovery voltage
280Vac ±7 · 270Vac ±7
Solar panel input range
150–550W, 1 pc
MPPT charging voltage range
15–60Vdc
Start charging voltage
15Vdc
Max charging voltage
70Vdc
Max solar charging power
550W max.
DC output ports
12V 2.5A DC jack 5.5×2.1mm, 3 pcs
USB port
5V 1A, 1 pc
Type-C port
5V 1A, 1 pc
Battery energy
2009.6Wh
Nominal battery voltage
6.4Vdc
Rated capacity
314Ah
Max charge / discharge current
220A / 220A
Operating voltage range
5.8Vdc–7.2Vdc
Installation site
Indoors
IP rating
IP21
Operating temperature
-10°C to +50°C
Operating humidity
5%–95% RH, non-condensing
Max altitude
≤2000 m
Product dimension
L430×W296×H157mm
Package size
L505×W371×H242mm
Net / gross weight
20kg / 21.6kg
Models and Options
This page covers the KJ-641000W configuration: 1000W pure sine wave AC output, 2009.6Wh LiFePO4 storage, one solar input and the DC / USB / Type-C port set listed above. For buyers who need a different port mix, casing print, retail packaging, firmware parameters, communication protocol or product configuration, these are handled through the manufacturer’s OEM/ODM program described in the Customization section. Cell type and structural safety components are fixed and not open to modification.
Materials and Structure
The battery is a LiFePO4 pack using a lithium iron phosphate cathode and graphite anode, housed in a steel / aluminum enclosure. The integrated portable body holds the battery section, the AC stage and the output panel in one unit, with a footprint of 430×296mm and a height of 157mm. Rated IP21 and specified for indoor installation, the unit is intended for dry, ventilated locations within -10°C to +50°C and 5%–95% non-condensing humidity at altitudes up to 2000m.
Integrated portable housing of the KJ-641000W, built around LiFePO4 cellsDetail view showing the compact 430×296×157mm format
Applications
Home emergency backup: 1000W pure sine wave AC output keeps sensitive household devices supplied during outages.
Outdoor camping: 2009.6Wh of LiFePO4 energy supports lighting, small electronics and DC accessories on site.
Off-grid sites: one 150–550W solar panel feeds the MPPT input at 15–60Vdc for daytime recharging without mains power.
Mobile working power: DC, USB and Type-C ports let tools and devices be charged from one portable unit.
Customization
OEM/ODM support covers casing printing and coating, retail packaging, firmware parameters, communication protocols and product configuration. The standard workflow runs from requirement confirmation to solution design, sampling in 5–7 working days, certification adaptation, mass production and global delivery. MOQ starts from 100 units; lead time follows industry-standard schedules based on order volume. Cell type and structural safety components are not open to modification, to preserve safety and batch consistency. Destination-market conformity support is available for SONCAP (Nigeria), SASO / SABER (Saudi Arabia), EAC (CIS), INMETRO (Brazil) and SNI (Indonesia).
Transport Compliance
The LiFePO4 battery pack is covered by UN38.3 Test Report RLCT2604057-01 issued by Rhenish-Lab against UN ST/SG/AC.10/11 Rev.7, Subsection 38.3, for lithium iron phosphate battery packs.
FAQ
What is the rated AC output of the KJ-641000W?
1000W rated output in pure sine wave form, at 185–230Vac / 50Hz, with a nominal input voltage of 230Vac.
How is the unit charged?
Two methods: AC mains charging at up to 1000W maximum charging power, and one solar panel of 150–550W through the MPPT input (15–60Vdc, start voltage 15Vdc, max charging voltage 70Vdc, 550W max solar charging power).
Which solar panel should a buyer pair with it?
A single panel rated between 150W and 550W whose output voltage falls inside the 15–60Vdc MPPT window and does not exceed 70Vdc.
What output ports are available?
Three 12V 2.5A DC jacks with 5.5×2.1mm plugs, one USB port at 5V 1A and one Type-C port at 5V 1A.
Where can the unit be installed?
Indoors, rated IP21, at -10°C to +50°C, 5%–95% relative humidity non-condensing and altitudes up to 2000m.
What protection does the battery management system provide?
The intelligent BMS protects against overcharge, over-discharge, over-current and over-temperature, with 220A maximum charge and discharge current.
Is transport documentation available?
Yes. UN38.3 Test Report RLCT2604057-01 from Rhenish-Lab covers the LiFePO4 pack under UN ST/SG/AC.10/11 Rev.7, Subsection 38.3.
What are the OEM terms and warranty?
MOQ starts from 100 units, sampling takes 5–7 working days, and customization covers casing print, packaging, firmware and configuration. Products carry a 5-year warranty with spare-parts supply and remote technical support.
Inquiry Information
Zhongshan KangJun New Energy Technology Co., Ltd. · Building 6, Qifang Industrial Zone, Tongyi Industrial Park, Guzhen Town, Zhongshan City, Guangdong Province, China. Contact: Joy / Mr Ou · Email: joyyiwei@foxmail.com · Tel: +86-13410198535 / +86-15900042963 · WhatsApp: +86 13512344323 / +86-15900042963
Please confirm target quantity, destination market, required plug and socket standard, solar panel specification and any packaging or firmware requirements when sending an inquiry.
Image Filenames and Alt Suggestions
portable-lifepo4-power-station-kj-641000w-hero.png — alt: KJ-641000W portable LiFePO4 power station product photo
portable-lifepo4-power-station-kj-641000w-housing-detail.png — alt: Close-up of the KJ-641000W portable power station housing
portable-lifepo4-power-station-kj-641000w-body-view.png — alt: KJ-641000W portable power station detail view
portable-lifepo4-power-station-kj-641000w-ports.png — alt: KJ-641000W portable power station connection area close-up
SEO title: 2009.6Wh LiFePO4 Portable Power Station With 1000W Pure Sine Wave AC Output
Meta description: KJ-641000W portable power station: 2009.6Wh LiFePO4, 1000W pure sine wave AC output, 550W MPPT solar input for home backup, camping and off-grid sites.
