O menu

3-5 Bar Single Stage Low-Pressure Screw Air Compressor 22-220 kW

Inventário:
SKU: 3729960806
Modelo: SLTL-22S、SLTL-30S、SLTL-37S、SLTL-45S、SLTL-55S、SLTL-75S、SLTL-90S、SLTL-110S、SLTL-132S、SLTL-160S、SLTL-185S、SLTL-200S、SLTL-220S SLTL-22T、SLTL-30T、SLTL-37T、SLTL-45T、SLTL-55T、SLTL-75T、SLTL-90T、SLTL-110T、SLTL-132T、SLTL-160T、SLTL-185T、SLTL-200T、SLTL-220T

{{ variable.name }}

{{ value.name }}

3-5 Bar Single Stage Low-Pressure Screw Air Compressor 22-220 kW

Thirteen SLTL-S models supply 2.06-59.78 m³/min at 3-5 bar for plants whose process air never needed 7-10 bar in the first place.

3-5 bar working pressure22-220 kW / 30-294 hpIP54 PM synchronous motorCE and ISO 14001
Single stage low-pressure screw air compressor SLTL-S series cabinet, front view

SLTL-S single stage low-pressure screw air compressor, 3-5 bar, 22-220 kW.

Product Summary

The SLTL-S series is a single stage low-pressure screw air compressor built for continuous duty at 3-5 bar. Thirteen models span 22-220 kW (30-294 hp), delivering 2.06-59.78 m³/min through DN50 to DN200 air outlets, with net weights from 1330 kg to 8000 kg. A low-pressure airend, an IP54 permanent magnet synchronous motor, a VFD-controlled centrifugal fan and three oversized filter elements make the series an option for wastewater aeration, glass and ceramics, cement and powder handling, and chemical processing.

Key Features

Air end developed for low pressure

A 5:6 asymmetrical rotor tooth profile with a large rotor, large bearing, low speed layout, measured on a three-coordinate measuring machine. Result: lower noise and vibration, longer airend life.

IP54 permanent magnet motor

IP54 protection stays reliable in dusty, humid plant rooms. Motor temperature rise is held below 60 K, and ceramic-plated bearings remove shaft-current damage.

VFD silent centrifugal fan

Centrifugal fans give higher air pressure and lower noise than axial fans. Frequency control holds oil temperature constant, extends lubricant life and resists cooler and filter clogging.

Three oversized filters

Air filter area exceeds 150% of normal requirement with low inlet pressure loss; oil filter rated capacity is at least 3x the circulating oil volume; glass-fibre oil separator keeps pressure loss low.

3-5 bar, up to 59.78 m³/min

One continuous capacity band from 2.06 to 59.78 m³/min lets aeration, conveying and purging lines share a single low-pressure air source.

Technical Specifications

Compressor typeSingle stage low-pressure screw air compressor
Model seriesSLTL-22S to SLTL-220S (13 models)
Working pressure3-5 bar
Capacity2.06-59.78 m³/min
Power22-220 kW
Horsepower30-294 hp
Noise62-77 ±3 dB
Air outlet diameterDN50, DN65, DN80, DN125, DN150, DN200
Net weight1330-8000 kg
MotorPermanent magnet synchronous, IP54, temperature rise under 60 K
MaterialCast iron, stainless steel

Models and Options

SLTL-22S · SLTL-30S · SLTL-37S · SLTL-45S · SLTL-55S · SLTL-75S · SLTL-90S · SLTL-110S · SLTL-132S · SLTL-160S · SLTL-185S · SLTL-200S · SLTL-220S

  • S-suffix models are listed under the single stage specification; the T-suffix range is the two stage specification.
  • Air outlet diameter is assigned per model within the DN50 to DN200 range.
  • OEM and ODM builds are supported by the in-house technical design department.

Materials and Structure

  • Cast iron and stainless steel construction.
  • Low-pressure airend with large rotor, large bearing and low speed configuration.
  • New 5:6 asymmetrical rotor tooth shape, verified by high-precision three-coordinate measurement.
  • Ceramic-plated motor bearings to eliminate shaft current effects.
  • Centrifugal fan with frequency conversion control for constant oil temperature.
  • Air filter, oil filter and oil separator in one filtration train.

Applications

Single stage low-pressure units are aimed at processes that consume large air volumes at low pressure: wastewater treatment aeration, glass and ceramics manufacturing, cement and powder handling, and chemical production. In wastewater aeration duty, our scenario data positions single stage low-pressure screw compressors as offering energy savings of up to 50% compared with conventional compressors.

Low-pressure screw air compressor package assembled at the Sollant manufacturing plant

Low-pressure screw compressor package in production at the Shanghai Sollant plant.

Customization

Sollant operates a 30,000 m² factory with roughly four production lines, a capacity of 20,000 units per year (about 600 units per month), 150 employees and 20 engineers, including an in-house technical design department and an engineering R&D laboratory. Full OEM and ODM customization is supported, and units are exported to more than 100 countries, with 80% of output going to export markets.

Case Study

90 kW low-pressure compressor, chemical manufacturer, Mexico

A 90 kW low-pressure air compressor was supplied to a Mexican chemical producer in 2017 and has remained in stable, continuous service for more than eight years. It feeds pneumatic conveying of powdered and granular raw materials, supplies low-pressure sterile air to fermentation tanks and reactors for aeration and mixing, and handles low-pressure purging of storage tanks, pipelines and filtration equipment.

Reported results: constant low-pressure output matches the process without the energy waste of reducing pressure from a conventional high-pressure compressor; the unit runs 24/7 in high-temperature, high-humidity and potentially corrosive conditions with an extremely low failure rate; stable air pressure supports uniform fermentation and conveying; and lower-load operation extends component life and reduces maintenance cost.

FAQ

What pressure and capacity does the SLTL-S series cover?

3-5 bar working pressure across 22-220 kW (30-294 hp), with capacity from 2.06 to 59.78 m³/min and net weight from 1330 to 8000 kg.

How do I choose a model for my duty point?

Model selection follows your required m³/min at the working pressure plus duty cycle. Send the duty point and our engineers will confirm the model from the 13-model range.

Is the motor suitable for dusty or humid plants?

The permanent magnet synchronous motor is rated IP54, so it is more stable and reliable than IP23 in harsh environments. Motor temperature rise stays under 60 K and bearings are ceramic-plated.

How much filtration does the unit carry?

Three elements: an air filter with over 150% of normal filter area, an oil filter rated at three times the circulating oil volume or more, and a glass-fibre oil separator core.

Which certifications are available?

An EC Declaration of Conformity for air compressors (No. 0P230209.SSE0Q23, issued by ECM, valid to 08 February 2028) and ISO 14001:2015 certification for air compressor design, production and sales (No. 05126E00664R053).

Can the compressor run continuously in a chemical plant?

Yes. The Mexican 90 kW installation has run in continuous chemical service since 2017 in high-temperature, high-humidity and mildly corrosive conditions.

What support is available after delivery?

24/7 engineering after-sales support, original spare parts and market support. Sollant has a representative office in Mexico and exports to more than 100 countries.

Inquiry Information

Send your required capacity (m³/min), working pressure (bar), duty cycle and site conditions for model confirmation and a quotation.

Email: info@sollant.com · Tel / WhatsApp: +86 155-8905-3798

Shanghai Sollant Energy Saving Technology Co., Ltd., No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.

Image Filename and Alt Suggestions

  • low-pressure-screw-air-compressor-sltl-s-series-front.png — Alt: Single stage low-pressure screw air compressor SLTL-S series cabinet, front view
  • low-pressure-screw-air-compressor-sltl-s-series-outlet.png — Alt: DN air outlet and control panel on the SLTL-S low-pressure compressor
  • low-pressure-screw-air-compressor-sltl-s-series-plant.png — Alt: Low-pressure screw air compressor package assembled at the Sollant manufacturing plant
SEO Title: 3-5 Bar Single Stage Low-Pressure Screw Air Compressor 22-220 kWMeta Description: Single stage low-pressure screw air compressor, S series, 3-5 bar and 2.06-59.78 m3/min, 22-220 kW. IP54 permanent magnet motor, VFD centrifugal fan, CE marked.URL Slug: single-stage-low-pressure-screw-air-compressor-s-seriesKeywords: low-pressure screw air compressor, single stage low pressure compressor, 3-5 bar air compressor, low pressure airend, wastewater aeration compressor