O menu

4-5 Bar Two Stage Low-Pressure Screw Air Compressor 22-220 kW

Inventário:
SKU: 2556158220
Modelo: SLTL-22S、SLTL-30S、SLTL-37S、SLTL-45S、SLTL-55S、SLTL-75S、SLTL-90S、SLTL-110S、SLTL-132S、SLTL-160S、SLTL-185S、SLTL-200S、SLTL-220S SLTL-22T、SLTL-30T、SLTL-37T、SLTL-45T、SLTL-55T、SLTL-75T、SLTL-90T、SLTL-110T、SLTL-132T、SLTL-160T、SLTL-185T、SLTL-200T、SLTL-220T

{{ variable.name }}

{{ value.name }}

4-5 Bar Two Stage Low-Pressure Screw Air Compressor 22-220 kW

Thirteen SLTL-T models combine two stage compression with 2.55-67.95 m³/min flow for 24-hour low-pressure duty.

4-5 bar working pressure22-220 kW / 30-335 hpTwo stage airendCE and ISO 14001
Two stage low-pressure screw air compressor SLTL-T series package, side view

SLTL-T two stage low-pressure screw air compressor, 4-5 bar, 22-220 kW.

Product Summary

The SLTL-T series is a two stage low-pressure screw air compressor covering 4-5 bar. Thirteen models run from 22 kW to 220 kW (30-335 hp) and deliver 2.55-67.95 m³/min through DN40 to DN150 outlets, with net weights from 1100 kg to 8100 kg. Compared with a single stage machine, two stage compression inside the same low-pressure band adds flow and extends bearing life, which is why these units are used for the 24-hour, high-intensity continuous operation typical of wastewater treatment plants and process plants.

Key Features

Two stage compression, 4-5 bar

Two stage compression holds the 4-5 bar band while lifting capacity to 67.95 m³/min, so a smaller footprint covers a larger air demand.

Extended bearing life

The two stage layout combines high energy efficiency with longer bearing life, an advantage in the 24-hour continuous operation of wastewater treatment plants.

Low-pressure airend design

5:6 asymmetrical rotor tooth profile in a large rotor, large bearing, low speed layout, verified with high-precision three-coordinate measurement for stable screw accuracy.

IP54 permanent magnet motor

IP54 protection is more stable than IP23 in harsh environments. Temperature rise stays below 60 K and ceramic-plated bearings eliminate shaft current effects.

VFD centrifugal fan and three filters

Frequency-controlled centrifugal fan holds oil temperature constant and keeps the cooler clear. Air filter, oil filter and glass-fibre oil separator handle filtration.

Technical Specifications

Compressor typeTwo stage low-pressure screw air compressor
Model seriesSLTL-22T to SLTL-220T (13 models)
Working pressure4-5 bar
Capacity2.55-67.95 m³/min
Power22-220 kW
Horsepower30-335 hp
Noise65-80 ±3 dB
Air outlet diameterDN40, DN50, DN65, DN80, DN125, DN150
Net weight1100-8100 kg
MotorPermanent magnet synchronous, IP54, temperature rise under 60 K
MaterialCast iron, stainless steel

Models and Options

SLTL-22T · SLTL-30T · SLTL-37T · SLTL-45T · SLTL-55T · SLTL-75T · SLTL-90T · SLTL-110T · SLTL-132T · SLTL-160T · SLTL-185T · SLTL-200T · SLTL-220T

  • T-suffix models are listed under the two stage specification; the S-suffix range is the single stage specification.
  • Air outlet diameter is assigned per model between DN40 and DN150.
  • OEM and ODM builds are supported by the in-house technical design department.

Materials and Structure

  • Cast iron and stainless steel construction for continuous industrial duty.
  • Two stage low-pressure airend with 5:6 asymmetrical rotor tooth shape.
  • Large rotor, large bearing, low speed configuration to cut noise and vibration.
  • Permanent magnet synchronous motor with ceramic-plated bearings.
  • Centrifugal fan under frequency conversion control for constant oil temperature.
  • Air filter, oil filter and oil separator supplied as a matched filtration set.

Applications

The 4-5 bar band and the higher flow ceiling suit wastewater treatment aeration, chemical production, cement and powder handling, and glass and ceramics manufacturing. In wastewater treatment the two stage low-pressure screw compressor is positioned for round-the-clock, high-intensity operation, matched with air filters and a refrigerated dryer, in humid, corrosive and high-temperature conditions.

Low-pressure screw air compressor package ready for shipment from the Sollant factory

Low-pressure compressor package prepared for export at the Sollant facility.

Customization

Sollant runs a 30,000 m² factory with approximately four production lines and an annual capacity of 20,000 units (about 600 per month), staffed by 150 employees and 20 engineers, including an in-house technical design department and an engineering R&D laboratory. Full OEM and ODM customization is offered, and 80% of output is exported to more than 100 countries.

Case Study

90 kW low-pressure compressor, chemical manufacturer, Mexico

A 90 kW low-pressure compressor has served a Mexican chemical producer since 2017, remaining in stable continuous operation for more than eight years. It supplies pneumatic conveying air for powdered and granular raw materials, sterile low-pressure air for fermentation tanks and reactors, and purging air for storage tanks, pipelines and filtration equipment.

Reported results: constant low-pressure output removes the energy waste of reducing pressure from a conventional high-pressure compressor, the unit runs 24/7 in high-temperature, high-humidity and potentially corrosive conditions with an extremely low failure rate, and stable air pressure improves fermentation and conveying uniformity while lowering electricity and maintenance costs.

FAQ

What is the difference between the S and T series?

The SLTL-S range is the single stage specification at 3-5 bar with 2.06-59.78 m³/min. The SLTL-T range is the two stage specification at 4-5 bar with 2.55-67.95 m³/min and up to 335 hp.

Why choose two stage compression for low pressure?

Two stage compression delivers higher flow inside the 4-5 bar band and combines high energy efficiency with extended bearing life, which suits 24-hour continuous operation.

What is the maximum capacity available?

The published two stage range reaches 67.95 m³/min at working pressures from 4 to 5 bar, with power from 22 to 220 kW.

Which outlet sizes are used?

DN40, DN50, DN65, DN80, DN125 and DN150, assigned according to model. Net weight ranges from 1100 kg to 8100 kg across the series.

How is noise controlled?

The large rotor, low speed airend layout reduces noise and vibration, and the centrifugal fan runs quieter than an axial fan. Published noise is 65-80 ±3 dB.

Which certifications are available?

An EC Declaration of Conformity for air compressors (No. 0P230209.SSE0Q23, issued by ECM, valid to 08 February 2028) and ISO 14001:2015 certification for air compressor design, production and sales (No. 05126E00664R053).

Can the unit be supplied to a specific plant standard?

OEM and ODM projects are handled by the in-house design department and R&D laboratory. Share your specification and the engineering team will confirm feasibility.

Inquiry Information

Send your required capacity (m³/min), working pressure (bar), operating hours and site conditions for model confirmation and a quotation.

Email: info@sollant.com · Tel / WhatsApp: +86 155-8905-3798

Shanghai Sollant Energy Saving Technology Co., Ltd., No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.

Image Filename and Alt Suggestions

  • two-stage-low-pressure-screw-air-compressor-sltl-t-series-side.png — Alt: Two stage low-pressure screw air compressor SLTL-T series package, side view
  • two-stage-low-pressure-screw-air-compressor-sltl-t-series-outlet.png — Alt: DN air outlet and service points on the SLTL-T low-pressure compressor
  • two-stage-low-pressure-screw-air-compressor-sltl-t-series-export.png — Alt: Low-pressure screw air compressor package ready for shipment from the Sollant factory
SEO Title: 4-5 Bar Two Stage Low-Pressure Screw Air Compressor 22-220 kWMeta Description: Two stage low-pressure screw air compressor for 4-5 bar duty, 2.55-67.95 m3/min and 22-220 kW. IP54 permanent magnet motor, silent VFD centrifugal fan.URL Slug: two-stage-low-pressure-screw-air-compressor-t-seriesKeywords: low-pressure screw air compressor, two stage low pressure compressor, 4-5 bar air compressor, two stage airend, low pressure compressor for wastewater treatment