O menu

40-70 t 4x2 Rigid Mining Dump Truck for Mine and Quarry Haul Roads

Inventário:
SKU: 3638426475
Modelo: Mining Dump Truck

{{ variable.name }}

{{ value.name }}
Rigid 4x2 haul truck

40-70 t 4x2 Rigid Mining Dump Truck for Mine and Quarry Haul Roads

A 4x2 rigid haul truck rated at 40,000-70,000 kg, built for overburden, ore and rock haulage where a narrower ramp and a lower payload class fit the site.

  • 40,000-70,000 kg payload
  • 4x2 rigid chassis
  • Torque converter
  • ROPS/FOPS offset cab
4x2 rigid mining dump truck with 40-70 t payload for overburden hauling
Rigid haul truck showing offset ROPS cab and rock body
4x2 off-highway dump truck at a mine dump point

Product Summary

The 40-70 t 4x2 rigid mining dump truck is an off-highway hauler for mine and quarry haul roads. It uses a rigid 4x2 chassis with a torque converter, a rock body with an integral box frame, and a single-side offset ROPS/FOPS cab. Rated payload is 40,000-70,000 kg.

This unit is not intended for public highway operation. It suits sites that need a lower payload class than a wide-body 6x4 or 8x4, including mine contracting, quarry benches, overburden stripping and temporary haul roads.

Key Features

  • 40,000-70,000 kg rated payload on a 4x2 rigid haul truck chassis, for narrower ramps and lower bridge limits than a wide-body unit.
  • Torque converter on the rigid haul truck driveline, with 8-9 speed manual or powershift automatic transmission.
  • 25-50 m3 struck and 30-60 m3 heaped body capacity, sized to a material density of 1.6-2.7 t/m3.
  • NM400/NM450 wear plate with 12-20 mm floor, 8-14 mm side wall and 10-16 mm front wall, impact beams and replaceable liner plates.
  • Front-mounted multi-stage telescopic cylinder with 50-55 degree tipping angle, 18-25 s lift time and 15-20 s lowering time.
  • ROPS/FOPS offset cab, body-side canopy, front anti-collision beam, bumper and through beam, body-up interlock and body-down buzzer.

Technical Specifications

SpecificationValue
Drive configuration4x2 rigid haul truck
Rated payload40,000-70,000 kg
Kerb weight and GVWKerb weight 25,000-45,000 kg; GVW 70,000-150,000 kg
Body capacity25-50 m3 struck; 30-60 m3 heaped
Body plateNM400/NM450; floor 12-20 mm; side 8-14 mm; front 10-16 mm
EngineNon-road diesel, 6 cylinders in line, turbocharged and intercooled, 350-770 hp (260-570 kW), 9-16 L, torque 1,500-3,300 N.m
Transmission8-9 speed manual or powershift automatic; torque converter on the rigid haul truck
Tipping systemFront-mounted multi-stage telescopic cylinder, 2-4 stages; 50-55 degrees; lift 18-25 s; lower 15-20 s
Max speed40-50 km/h on haul road
Gradeability25-32 percent on a dry haul road
CabSingle-side offset, 1-2 seats, ROPS/FOPS, left-hand or right-hand drive
TiresOTR 14.00-25, 16.00-25, 18.00-25 or 875/65R29

Models and Options

The 4x2 rigid haul truck covers the 40,000-70,000 kg class. Body options include liner plates at the floor and tail, heated floor, extended side boards, and a rock box with reinforced tail chute. Cold, dust, safety and fleet packages are available, and the body can ship assembled or knocked down for local assembly.

Materials and Structure

The body is built from NM400/NM450 wear-resistant steel plate, welded into an integral box frame with impact beams and a body-side canopy over the cab. Q345 structural steel is used for the body frame, brackets and tail chute. The chassis frame is high-strength low-alloy steel, 8-14 mm, bolted or welded into a box section with cross members and gussets at the load points.

The cab is a welded steel shell with ROPS/FOPS structure, tempered glass, anti-corrosion primer and polyurethane topcoat. Hydraulic cylinders use honed steel tube and hard-chrome plated piston rod. Suspension uses rolled leaf springs and rubber bushes, with hydropneumatic struts on the front axle option.

Applications

Open-pit mines, quarries, aggregate production, coal mines, cement raw material sites, overburden stripping, ore haulage, waste dump disposal, mine contracting and outsourced haulage fleets, hydropower and dam construction, road and rail construction in remote terrain, and mining equipment rental where a 40-70 t rigid unit fits the ramp and dump point.

Customization

Before the order, sales engineers agree material density, ramp grade, altitude, ambient temperature, dust, dumping height, and the loader or excavator that fills the body. Body size, axle rating, tire type and cooling package follow from those answers. A high-altitude package is available for sites above 3,000-4,500 m, and the fleet package can include telematics, payload monitoring, same paint and sequential unit numbers.

Case Study

A mining contractor and quarry operator in DR Congo took 4 units in the 40-50 t payload class. The units handle overburden and ore hauling on open-pit mine haul roads, with a typical project scale of 2 years in service. Reported result: steady haul-cycle availability under continuous duty. The build included a reinforced frame and body for impact loading, high ground clearance, a retarder and cooling package for long descents, and a protective cab.

FAQ

Is this truck for public roads?

No. It is an off-highway dump truck for mine and quarry haul roads and is not intended for public highway operation. Max speed is 40-50 km/h on haul road.

What payload does the 4x2 cover?

The 4x2 rigid haul truck covers 40,000-70,000 kg. The DR Congo case used a 40-50 t payload class.

How is body volume set?

A 25-50 m3 struck body is quoted against the density the customer actually hauls, typically 1.6-2.7 t/m3. Heaped capacity is 30-60 m3.

What driveline does the 4x2 use?

A non-road diesel engine at 350-770 hp (260-570 kW), 9-16 L and 1,500-3,300 N.m torque, with 8-9 speed manual or powershift automatic transmission and a torque converter on the rigid haul truck.

What is the lead time and shipping method?

Lead time is about 30-60 working days from down payment, depending on body size and options. The unit ships by break-bulk vessel or RoRo, 1-3 units per shipment, under FOB, CIF or DAP terms.

What does the warranty cover?

Warranty is 12 months for major components. Wear plates, liners, filters and brake linings are consumables.

Inquiry Information

Please share material density, ramp grade, altitude, ambient temperature, dust level, dumping height, loading tool, target payload and drive configuration so the body volume, axle rating and tire specification can be fixed before quotation.

Tel: +86-13083602803
WhatsApp: +86-16638078903
Email: info@elorry-ind.com
Address: Zhengzhou City, Henan Province, China

Image Filename and Alt Suggestions

  • mining-dump-truck-4x2-40-70t-overburden.jpg - 4x2 rigid mining dump truck with 40-70 t payload for overburden hauling
  • mining-dump-truck-4x2-rops-cab.jpg - Rigid haul truck showing offset ROPS cab and rock body
  • mining-dump-truck-4x2-dump-point.jpg - 4x2 off-highway dump truck at a mine dump point

Page Information

SEO Title: 40-70 t 4x2 Rigid Mining Dump Truck for Mine and Quarry Haul Roads
Meta Description: 40,000-70,000 kg 4x2 rigid mining dump truck with torque converter, 25-50 m3 struck body and 50-55 degree tipping for mine and quarry off-road haul roads.
URL Slug: 40-70t-4x2-rigid-mining-dump-truck
H1: 40-70 t 4x2 Rigid Mining Dump Truck for Mine and Quarry Haul Roads