{{ variable.name }}
Product summary. A 4x2 truck-mounted mechanical sweeper that combines centre-mounted twin disc brushes, a wide floating vacuum suction nozzle and high-pressure spray bars at the brushes and at the nozzle. Published production figures for this unit are 7,360 kg GVW, 2,190 kg payload, 2.2 m sweeping width, 1 m3 water tank, 2 m3 dust bin, 45,000 m2/h working area and 95 percent or higher sweeping efficiency. It suits municipal routes where a 7,000-10,000 kg GVW chassis stays inside local axle and bridge limits.
Road sweeper truck in 4x2 city configuration, disc brushes lowered and spray bar running.
| Item | Specification |
|---|---|
| Drive configuration | 4x2 |
| GVW | 7,000-10,000 kg (published unit 7,360 kg) |
| Rated payload | 2,000-12,000 kg range (published unit 2,190 kg) |
| Sweeping width | 2.2-3.6 m adjustable (2.2 m on the published unit) |
| Working area | 20,000-90,000 m2/h (45,000 m2/h on the published unit) |
| Sweeping efficiency | 95% or higher on a standard test surface |
| Water tank / dust bin | 1-10 m3 / 2-12 m3 (1 m3 and 2 m3 on the published unit) |
| Maximum particle diameter | 100-150 mm at the suction nozzle |
| Working / transport speed | 3-20 km/h / 90-100 km/h |
| Engine | Diesel 85-250 kW, Euro II to Euro V, matched to local fuel quality |
| Auxiliary engine | 57-100 kW, dedicated to the suction fan and hydraulic pump |
| Water pump | High-pressure piston or centrifugal, 8-15 MPa for washing |
| Bin discharge | Rear tipping or rear door, 20-40 s per cycle |
| Gradeability / noise | 20-30% / below 82 dB(A) at 7 m in normal sweeping mode |
| Working temperature | -20 to +50 degrees C; tropical cooling or cold-start package available |
| Cab and drive side | 2-3 persons day cab, left-hand or right-hand drive |
Water tank volume is selectable from 1 to 10 m3 and dust bin volume from 2 to 12 m3, so the same platform can be re-quoted with a larger hopper or a second axle. The kerb brush can be specified on the left, the right or both sides. Engines run from 85 to 250 kW in Euro II to Euro V with a manual 5-10 speed gearbox or an automated manual as an option. Left-hand and right-hand drive are both built, and a tropical cooling package or a cold-start package can be fitted. Optional equipment includes a fog cannon, a separate washing boom, a hand-held spray gun and a drinking-water tank.
Body and tanks are built in Q235/Q345 carbon steel, shot-blasted, epoxy-primed and polyurethane topcoated, with stainless steel 304 used for the water tank and dust bin where humidity or salt is a problem. The dust bin floor and discharge door are 4-6 mm wear-resistant steel and the sub-frame is 6-8 mm bolted. Brushes use polypropylene or nylon filament discs with replaceable segments and optional steel-wire tufts for heavy debris. The suction nozzle is Q345 wear-resistant steel with replaceable rubber or polyurethane wear strips, and EPDM rubber seals sit on tank covers, doors and nozzle skirts.
Configuration is fixed before quotation by asking what road is swept, what debris is typical, how many kilometres a day, whether water is available on site and where the bin is tipped. Those answers set tank volume, sweeping width, brush layout and axle configuration, so the truck is neither too small for the route nor too heavy for the road.
Send the road type, the typical debris, daily kilometres, whether a water filling point is available and where the bin is emptied, and the configuration is quoted against those answers.
Tel +86-13083602803 | WhatsApp +86-16638078903 | Email info@elorry-ind.com
Supplier factory qualification assessed by SGS under the Alibaba Gold Plus Supplier Assessment Criteria, certificate 479886222_T, valid to 06 Nov 2026.