SEO Title: 600–900°C Low-Temperature Boron Frit for Grinding Wheels and Glass CoatingsMeta Description: RFL-B01 boron frit from RENOVA runs at 600–900°C for grinding wheels, low-temperature coatings and glass coatings. Discuss your formulation trial with our team.URL Slug: /boron-frit-rfl-b01-low-temperature
RENOVA · Low-Temperature Frit · Model RFL-B01
600–900°C Low-Temperature Boron Frit for Grinding Wheels and Glass Coatings
Boron frit RFL-B01 is a boron-containing low-temperature frit processed between 600°C and 900°C. It is used in abrasive manufacturing, coatings and glass manufacturing, including grinding wheels, low-temperature coatings and glass coatings.
600–900°C application range
Boron-containing frit
Grinding wheel formulations
Coatings and glass
Boron Frit RFL-B01 — low-temperature frit for 600–900°C processing.Boron Frit RFL-B01 — material detail supplied for formulation trials.
Product Summary
RFL-B01 is a boron-containing low-temperature frit from RENOVA INDUSTRIAL & TRADING CO., LTD. Its application temperature range is 600–900°C, which places it in the low-temperature segment of frit processing. The frit is added to application-specific formulations and thermally processed within this window. Typical uses are grinding wheels, low-temperature coatings and glass coatings, served through three industries: abrasive manufacturing, coatings and glass manufacturing.
For buyers, the relevant question is process fit: does the frit melt uniformly at the firing temperature your kiln actually runs, and does it stay compatible with the rest of the formulation? Those two requirements — uniform melting behaviour and compatibility with the target formulation during low-temperature processing — define how RFL-B01 is selected and trialled.
Key Features
600–900°C working window
The frit is processed between 600°C and 900°C, fitting lines that run low-temperature firing rather than high-temperature cycles.
Boron-containing chemistry
The material is a boron-containing frit developed for low-temperature melting inside application formulations.
Uniform melting behaviour
Uniform melting is the stated process requirement for this frit, checked during thermal processing across the batch.
Formulation compatibility
It is intended for good compatibility with the target formulation during low-temperature processing, so it can be introduced into existing mixes.
Three documented industries
Abrasive manufacturing, coatings and glass manufacturing, with grinding wheels, low-temperature coatings and glass coatings named as uses.
Formulation support
RENOVA's 29-technician team adjusts formulation and application process together with the customer's factory technicians.
Technical Specifications
Parameter
Detail
Product
Boron Frit
Model
RFL-B01
Type
Low-temperature frit
Material
Boron-containing frit
Application temperature range
600–900°C
Processing method
Added to application-specific formulations, then thermally processed at 600–900°C as required by the application
RFL-B01 is the documented model for this low-temperature boron frit, with a 600–900°C working range. The exact point used inside that range depends on the application: a grinding wheel formulation, a low-temperature coating and a glass coating each carry their own thermal profile. Because of this, the suitable specification is confirmed with the customer's technicians before a production run rather than assumed from the product name alone.
Materials and Structure
The product is a boron-containing frit: a glassy material supplied for addition into application formulations. In use it is mixed into the formulation with standard mixing equipment and then thermally processed at 600–900°C, where it must melt uniformly and remain compatible with the other components of the mix. Both behaviours are part of the product's defined process requirement and are the points to observe during a factory trial.
Applications
Grinding wheels — used in abrasive manufacturing, where the frit is blended into the bond formulation and fired in the 600–900°C window.
Low-temperature coatings — added to coating formulations that are cured or fired at low temperature, where compatibility with the existing mix matters most.
Glass coatings — applied in glass manufacturing processes that require a frit melting within the 600–900°C range.
Customization
Customization is part of how RENOVA works. After a frit is selected, the technical team cooperates with the customer's factory technicians to fine-tune the formulation and the application process according to the ceramic body, kiln type, firing temperature and production process. Production trials are used so the customer can evaluate suitability before scaling up.
FAQ
What is the application temperature of RFL-B01 boron frit?
The application temperature range is 600–900°C, so it belongs to the low-temperature frit group.
Which applications is this frit used in?
Grinding wheels, low-temperature coatings and glass coatings, across abrasive manufacturing, coatings and glass manufacturing.
How is the frit used in production?
It is added to application-specific formulations and then thermally processed at 600–900°C as the application requires, using formulation mixing and thermal processing equipment.
What should be checked during a production trial?
Two things: uniform melting behaviour of the frit and good compatibility with the target formulation during low-temperature processing.
Can the formulation be adapted to my kiln and body?
Yes. RENOVA's technical team adjusts the formulation and application process according to ceramic body, kiln type, firing temperature and production process, working with your factory technicians.
What information should I send with an inquiry?
Your application, target firing temperature within 600–900°C, kiln type, body or substrate details and the current formulation you are using.
Where can I get pricing, MOQ and packaging details?
These are not published on this page. Send your requirement to the contact below and RENOVA will confirm them for your order.
Inquiry Information
Contact: Rick Lee
Email: rick@renovafs.com
Tel: +86 189-2598-9980
WhatsApp: +81 80-5477-2666
Address: Room A301, Area A&B Ceramic Equipment Center CCIH, No. 68 Jihua Road, Chancheng, Foshan, Guangdong, China
