{{ variable.name }}
This 6x4 boom wrecker truck is the medium and heavy recovery unit: a 3-section telescopic boom with 12,300 mm lifting height and 10,710 mm working radius, a 3,350 mm underlift, and two 200 kN hydraulic winches. It lifts and tows at the same time for truck and semi-trailer recovery.

SEO Title: 6x4 Boom Wrecker Truck with 12,300 mm Lift and 3,350 mm Underlift
Meta Description: 6x4 boom wrecker truck with 12,300 mm lift height, 10,710 mm working radius, 3,350 mm underlift and two 200 kN winches for truck and semi-trailer recovery.
URL Slug: /products/6x4-boom-wrecker-truck-underlift
The 6x4 chassis is quoted for 12,000-25,000 kg medium and heavy recovery. The boom rating is stated at the working radius: 20,000-30,000 kg at the top of the lift and 8,300-12,500 kg fully extended. The underlift arm reaches 3,350 mm and the fork lifts to 1,835 mm, so a low car or a raised truck axle can be picked up.
| Drive configuration | 6x4 |
|---|---|
| Recovery class | 12,000-25,000 kg medium and heavy |
| Boom | 3-section telescopic welded box section |
| Basic boom length | 5,580 mm |
| Cylinder stroke | 6,000 mm on heavy units |
| Max lifting height | 12,300 mm |
| Max working radius | 10,710 mm |
| Boom angle | 0-60 degrees |
| Lift capacity | 20,000-30,000 kg at top; 8,300-12,500 kg fully extended |
| Winch | 1-2 hydraulic winches, 200 kN each on heavy models |
| Wire rope | 22 mm 6x25Fi+IWR1870, 60 m per drum, 5 m/min minimum |
| Underlift | 3,350 mm max effective length; 1,650 mm stroke |
| Fork height | Up to 1,835 mm |
| Outrigger spans | Front 6,200 mm, rear 4,030 mm, front-to-rear 7,760 mm |
| Engine | Diesel 95-315 hp, 3.9-8.9 L, Euro II to Euro V |
| Transmission | Manual 5-10 speeds, automated manual optional |
| Brakes | Air brake with ABS, exhaust brake, spring parking brake |
| Max speed | 90-95 km/h; towed vehicle about 40 km/h |
Boom rating, underlift forks, winch count, outrigger type, left- or right-hand drive, engine emission, sleeper cab, air suspension and hub reduction are selected at order. A load-moment limiter and pressure gauge are optional.

The boom and lifting frame use welded high-strength steel box section, H70 grade for key and stressed members, with Q345 reinforcement plates at pivot points. Cylinders have honed tubes and hard-chrome rods; outrigger beams use high-strength steel with forged or cast feet.
Truck and bus recovery, highway breakdown and accident removal, semi-trailer recovery, righting rolled or jackknifed units, ditch recovery, construction equipment recovery, dealership and workshop support.
LHD or RHD, engine matched to local fuel, tropical cooling, cold-start package, warning equipment to local rules, boom rating, underlift forks and winch count.
A highway rescue operator and road authority in Jordan took two units for highway breakdown recovery and accident vehicle removal. The project scale is typically two years in service. The reported result was reliable recovery duty with faster clearance of incident vehicles. The configuration highlighted underlift and boom, winch capacity, stabilising outriggers and night working lights.
The 6x4 is rated 20,000-30,000 kg at the top of the lift but 8,300-12,500 kg fully extended, so the number must match the radius of the job.
The heavy underlift has a 3,350 mm effective length, 1,650 mm stroke and fork height up to 1,835 mm for axle or frame lifting.
One or two hydraulic winches; heavy models quote 200 kN each with 22 mm rope and 60 m per drum.
Front H-type and rear L-type outriggers give front 6,200 mm, rear 4,030 mm and front-to-rear 7,760 mm spans.
Heavy-duty rotator models offer 360 degrees continuous rotation; non-rotator boom units use a fixed A-frame or part rotation.
About 30-45 working days from down payment; 12 months for major components, with hydraulic valves and cylinders under supplier terms.
Send the unit to be recovered, heaviest unit weight, road and site conditions, climate and local warning-equipment rules. Sales engineers confirm boom rating, underlift forks and winch count before order.
Tel +86-13083602803 | WhatsApp +86-16638078903 | Email info@elorry-ind.com
Henan Elorry Industrial Co., LTD., Zhengzhou, Henan, China | www.elorry-ind.com
Image IDs match the product gallery; use the filename and alt text for the final upload.
