O menu

6x4 Tipper Semi-Trailer Tractor Truck with Power Take-Off

Inventário:
SKU: 4612428420
Modelo: Tractor Truck

{{ variable.name }}

{{ value.name }}

6x4 Tipper Semi-Trailer Tractor Truck with Power Take-Off

Heavy-haul prime mover specified with a power take-off for tipper semi-trailer work in aggregate, coal and ore haulage.

SEO Title6x4 Tractor Truck with Power Take-Off for Tipper Semi-Trailer Work
Meta Description6x4 tipper tractor truck with power take-off for aggregate and ore haulage: heavy-haul axle ratios, retarder or engine brake, 10 tires and ABS standard.
URL Slug6x4-tipper-pto-tractor-truck

Product Summary

This 6x4 tractor unit is configured for tipping work rather than dry van trunking: a power take-off is fitted for tipper semi-trailers, gearing moves to the heavy-haul band and the driveline is rated for repeated loaded cycles. Gross combination weight spans 25,000-60,000 kg within local axle-load rules, and the fifth wheel takes 10,000-16,000 kg at a 1,150-1,350 mm coupling height. A retarder or engine brake is specified for loaded descents from pit or quarry floors, and the trailer interface is confirmed with your tipper supplier before production.

Key Features

Power take-off for tipper trailersA power take-off is specified for tipper semi-trailer work, so the trailer tipping system is driven from the tractor rather than a separate engine.
Heavy-haul gearingAxle ratios of 4.11-5.29 for mountain and heavy haul, with a 9-16 speed manual gearbox standard and AMT optional, matched to GCW and pit gradients.
Retarder or engine brakeHolding a loaded combination on quarry ramps and long descents reduces reliance on the dual-circuit air brake and extends lining life.
Frame built for cyclic loadingQ345 high-strength ladder frame, 280-320 mm deep and 8 mm thick, with bolted cross members and reinforcement gussets on multi-leaf springs.
Six-by-four traction with ten tiresTandem rear axles of 13,000-16,000 kg each on 10 tubeless tires keep traction under a loaded tipper body; differential locks are optional.
Coupling agreed with the tipper supplierFifth wheel load 10,000-16,000 kg, 2 inch or 3.5 inch kingpin and air line take-off points confirmed before build, so no shims are needed on delivery.

Technical Specifications

Vehicle typeRoad tractor unit (prime mover) for semi-trailer haulage, tipper specification
Drive and tires6x4; 10 tubeless tires, 11R22.5, 12R22.5 or 315/80R22.5
GVW / GCW16,000-25,000 kg / 25,000-60,000 kg by driveline and local axle-load rules
Fifth wheel10,000-16,000 kg load; 2 or 3.5 inch kingpin; coupling height 1,150-1,350 mm
Power take-offPower take-off available for tipper semi-trailers; tipping system requirements confirmed at inquiry
EngineDiesel, 6 cylinders in line, turbocharged and intercooled, 6.5-13 L, 240-560 hp, 900-2,600 N.m
EmissionEuro II to Euro V; Euro VI on request, matched to local fuel quality
Transmission9-16 forward speeds and 2 reverse; manual standard, AMT optional; clutch 395-430 mm
Axles and ratioFront 6,500-7,500 kg; rear 13,000-16,000 kg each; ratio 4.11-5.29 heavy haul; differential locks optional
BrakesDual-circuit air brake, ABS standard, EBS optional, retarder or engine brake, spring parking brake
Fuel and electrics300-800 L aluminum or steel tank, single or twin; 24 V, trailer socket, GPS and telematics pre-wiring
Performance90-110 km/h with speed limiter; gradeability 20-35%; 28-40 L/100 km loaded; -30 to 50 C packages

Models and Options

The range also includes 4x2 units for port drayage, 6x4 line-haul tractors with high-roof sleeper cabs and 6x6 off-road tractors for unpaved routes. For tipper work, options include differential locks, rear air suspension, forged aluminum wheels, roof deflector, tool box, spare wheel carrier, telematics and company livery. Cab choice covers day cab, sleeper cab and high-roof sleeper cab.

Materials and Structure

The ladder frame uses Q345 high-strength structural steel, 280-320 mm deep and 8 mm thick, with bolted cross members and reinforcement gussets for repeated loading. The welded steel cab carries electrophoretic primer and anti-corrosion coating. The fifth wheel is a cast or forged steel plate with hardened locking jaw and grease points, and the fuel tank is aluminum alloy or steel. Air and brake lines use hard-chrome-plated actuators, brass and stainless fittings and high-pressure rubber hoses.

Applications

  • Tipper semi-trailer work for aggregate, coal and ore
  • Construction material logistics from pit and quarry to site
  • Building materials, steel, timber and pipe transport
  • Mining camp and project site supply on mixed road quality
  • Equipment rental and leasing fleets running cyclic loads

Customization

Engine rating, gearbox and axle ratio are agreed against GCW, gradient and annual mileage, and the power take-off specification is matched to your tipper trailer requirements at inquiry. The cold package covers -30 C starting with a fuel heater, engine preheater and cab heater; the tropical package covers 50 C with a reinforced radiator, dust shield and high-capacity air conditioner. Left-hand and right-hand drive are both available.

FAQ

What does the power take-off drive?

The power take-off is specified for tipper semi-trailer work, driving the trailer tipping system from the tractor. Share your tipper trailer requirements and the PTO specification is confirmed before build.

Is a retarder necessary for quarry work?

A retarder or engine brake is recommended where loaded descents and pit ramps are routine. It holds the combination on long grades and reduces reliance on the service brakes.

Which axle ratio should a tipper fleet order?

Heavy-haul ratios of 4.11-5.29 suit mountain, quarry and heavy-haul work. Highway ratios of 2.85-4.11 suit operators running long paved legs between loads.

How much weight can the fifth wheel carry?

The fifth wheel is rated at 10,000-16,000 kg with a 2 inch or 3.5 inch kingpin, at a coupling height of 1,150-1,350 mm agreed with your trailer supplier.

What is the delivery time?

About 30 days for orders under 20 units, with stock models shipping faster. Progress photos are shared at chassis, cab and final inspection.

Can tractors and tipper trailers ship together?

Yes. Mixed tractor models and semi-trailers can be consolidated in one shipment under FOB, CIF or DAP terms, with invoice, packing list, bill of lading, certificate of origin and insurance.

Image Filenames and Alt Suggestions

ELORRY 6x4 tipper tractor truck with power take-off
File: tractor-truck-6x4-tipper-pto-front.png | Alt: ELORRY 6x4 tipper tractor truck with power take-off
Side view of the heavy-haul tractor unit with tandem rear axles
File: tractor-truck-6x4-tipper-tandem-axle.png | Alt: Side view of the heavy-haul tractor unit with tandem rear axles
Tractor unit fifth wheel area prepared for tipper semi-trailer coupling
File: tractor-truck-6x4-tipper-coupling-height.png | Alt: Tractor unit fifth wheel area prepared for tipper semi-trailer coupling

Inquiry Information

Send tipper trailer type, tipping system requirements, payload per cycle, pit or road gradient and axle-load rules. Sales engineers confirm the PTO specification, axle ratio and fifth wheel interface before production.

  • Tel: +86-13083602803 | WhatsApp: +86-16638078903
  • Email: info@elorry-ind.com | Zhengzhou City, Henan Province, China
  • Trade terms: FOB, CIF or DAP; RoRo, bulk vessel or flat rack
  • Quality: 100% pre-shipment check including brake test and road test; 12-month major-component warranty