{{ variable.name }}
The largest build in the range: 20,000-25,000 L on an 8x4 chassis, with a rear bar reaching 18 m and a front flush of up to 16 m for multi-lane roads and long hauls.

Where the route is a multi-lane carriageway, an airport perimeter road or a long industrial haul, the limiting factor is time between refills, not manoeuvrability. This 8x4 build carries 20,000-25,000 L, sits at the top of the 7,495-31,000 kg GVW band, and runs up to 11,000 mm long and 2,500 mm wide with a wheelbase up to 5,950 mm. The rear sprinkler bar reaches 18 m and the front flush up to 16 m, so wider pavements are covered in fewer passes; for reference, a 20,000 L load at a 14 m width and 10-15 km/h waters roughly 5-7.5 km in about 30 minutes of spraying. A 6 mm shell and a 120-micron epoxy lining handle long days on silt-heavy service water.
The 20,000-25,000 L tank cuts refill trips on multi-lane carriageways, where the rear bar covers up to 18 m in a single pass.
Above 12,000 L the tank plate is 6 mm, with dished heads one gauge thicker and baffles every 1.5-2 m to limit surge on a part-full tank.
Two adjustable bumper nozzles spread 8-16 m and can be set to a jet for compacted mud or a fog for light dust ahead of the wheels.
Front axles 2,500-7,000 kg and rear 4,000-16,000 kg, on 7.00R16 to 12.00R20 tyres, 6-10 plus one spare, with hub reduction optional.
40-90 m3/h at 45-90 m head, 6-8 m suction lift and a 3-5 m hose, so a long section without a hydrant is still workable.
Front, rear, side and cannon valves are operated from the cab with manual override at the rear platform and a low-level alarm.
| Item | Specification |
|---|---|
| Drive configuration | 8x4 |
| Tank volume | 20,000-25,000 L |
| GVW | Up to 31,000 kg depending on chassis and tank volume |
| Overall length | Up to 11,000 mm |
| Overall width | Up to 2,500 mm |
| Wheelbase | Up to 5,950 mm |
| Tank shell | Q235B or Q345B carbon steel 6 mm above 12,000 L, heads one gauge thicker |
| Interior | Epoxy anti-corrosion coating 120 microns or more; stainless 304 shell optional |
| Pump | 40-90 m3/h, head 45-90 m, suction lift 6-8 m |
| Rear spray bar | 10-18 m, bar height 300-800 mm, adjustable for wind drift |
| Front flush | 8-16 m, jet or fog pattern |
| Water cannon | 28-40 m, 360 degrees, -10 to +60 degrees |
| Working pressure | 0.3-0.8 MPa, main pipe DN65, nozzle orifice 16-22 mm |
| Axles | Front 2,500-7,000 kg, rear 4,000-16,000 kg, hub reduction optional |
| Tyres | 7.00R16 to 12.00R20, 6-10 plus one spare |
| Fuel tank | 100-400 L |
| Engine | Diesel 90-270 hp, Euro II to Euro V |
| Speed | Maximum 90-95 km/h, spraying 8-20 km/h |
| Gradeability | 25-30 percent |
Specifications are the build range for this configuration and are confirmed on the order sheet.
Two volumes are offered on the 8x4 chassis: 20,000 L and 25,000 L. Options specified at order include a stainless 304 tank shell, a 30-60 m fog cannon, a 10-15 MPa high-pressure washer, a dosing unit for pesticide or disinfectant, wireless remote control and a sleeper cab. Left-hand and right-hand drive are both available.
The shell is 6 mm Q235B or Q345B plate above 12,000 L, with dished heads one gauge thicker and anti-surge baffles every 1.5-2 m. One or two hinged manhole covers of 450-600 mm with lock and dust seal sit on top, alongside a top filler with strainer; the lowest point carries a 2-4 inch drain valve, with overflow pipe and vent. A sight tube plus electric gauge with cab alarm shows the level. The top has an anti-slip walkway, ladder and handrail, and the rear working platform is railed. Piping is galvanised DN65 with flanged joints; the cannon is aluminium alloy with a brass nozzle and worm-gear rotation.
Tank volume, spray widths, axle ratings and optional equipment are set against the carriageway width, daily area, haul length and water source. Where a site has no hydrant, the suction set and pump flow are matched to the draw point; where the priority is dust on a wide haul road, the rear bar width and cannon range are specified together. Climate packages for -20 to 45 degrees C operation are selected on the same order sheet.
The 8x4 build carries 20,000-25,000 L and covers wider pavements with a rear bar up to 18 m, which reduces refill and return trips on long or multi-lane routes.
The rear bar spans 10-18 m and the front flush 8-16 m; both are adjustable, and the bar height sits 300-800 mm above ground for wind drift.
Above 12,000 L the shell is 6 mm Q235B or Q345B with heads one gauge thicker, a 120-micron epoxy lining and baffles every 1.5-2 m.
Yes. Suction lift of 6-8 m through a 3-5 m hose lets the pump draw from canal, pond, well or reservoir; a hydrant inlet and outlet are also fitted.
Gradeability is 25-30 percent and the minimum turning diameter is 15-19 m across the range; ground clearance is 240 mm.
Invoice, packing list, bill of lading, certificate of origin, insurance and tank test report are prepared together, under FOB, CIF or DAP terms.
Tell us the lane width, section length, water source and daily area. We confirm tank volume, bar width, axle ratings and pump flow before the order is placed.
Email: info@elorry-ind.com | WhatsApp: +86-16638078903 | Tel: +86-13083602803
Henan Elorry Industrial Co., LTD. - Zhengzhou, Henan, China | www.elorry-ind.com

