O menu

8x4 Heavy Tipper Truck For High Volume Quarry Aggregate Work

Inventário:
SKU: 8950465930
Modelo: Tipper Truck

{{ variable.name }}

{{ value.name }}

8x4 Heavy Tipper Truck For High Volume Quarry Aggregate Work

8x4 heavy tipper truck with steel body for quarry and aggregate haulage
8x4 heavy tipper truck with steel tipping body for high-volume material haulage.

Product Summary

The ELORRY 8x4 heavy tipper truck uses a 32,000 kg GVW and 8x4 drive for high-volume quarry and aggregate work. Body volume is about 16-22 m³. The rigid tipper payload range is 1,500-20,000 kg, with the 8x4 class at the top of that range. The steel tipping body uses Q235 or Q345, a 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall; wear-resistant plate is optional for rubble and rock. Tipping angle is 45-55° and lifting time is 12-25 s. Larger tippers ship by flat rack, RoRo or bulk vessel.

Key Features

32,000 kg GVW 8x4

The 32,000 kg GVW and 8x4 drive match high-volume quarry and aggregate routes where local axle-load limits allow this class.

16-22 m³ body volume

About 16-22 m³ supports high-volume crushed rock, sand, gravel and construction aggregate haulage with fewer runs.

Payload at the top of the range

The rigid tipper payload range is 1,500-20,000 kg, and the 8x4 class sits at the top of that range for heavy material hauling.

Steel body for quarry loads

Q235 or Q345 steel, 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall handle rubble and rock; wear-resistant plate is optional.

Proven export case

One 8x4, 400 hp tipper batch was delivered to a construction and quarry contractor in Panama in April 2024 and had about 31 months in service at record time.

Technical Specifications

ItemSpecification
GVW class32,000 kg
Drive8x4
Body volumeAbout 16-22 m³
Body internal size rangeL 2,400-7,600 mm × W 1,800-2,450 mm × D 400-1,400 mm
Tipping angle45-55°
Lifting / lowering time12-25 s / 10-20 s
Working pressure160-200 bar
EngineDiesel 4 or 6 cylinders, 2.8-9.5 L, 130-400 hp
EmissionEuro II, III, IV or V; Euro VI on request
Transmission6-12 forward speeds, 1-2 reverse, manual; AMT optional
Tipping controlGearbox PTO driving the tipping pump, in-cab control
BrakesDual-circuit air brake, ABS, engine exhaust brake; retarder optional
SteeringHydraulic power steering; left-hand or right-hand drive
Tires195/75R16 to 12R22.5, tubeless standard
Fuel tank80-400 L
Maximum speed80-100 km/h; speed limiter available
Minimum turning radius5.5-9.5 m
Working temperature-20 to 45°C with cold-start and tropical packages
Warranty12 months for major components with spare-parts support
Lead timeAbout 30 days for orders under 20 units; stock models ship faster

Models and Options

ConfigurationOptions
GVW class32,000 kg
Drive8x4
Body volumeAbout 16-22 m³
Body stylesSteel, aluminum, triple-drop-side, three-way, tool carrier
Cab2-3 persons, day cab standard, sleeper cab optional
EmissionEuro II, III, IV or V; Euro VI on request
SteeringLeft-hand or right-hand drive
Load coverManual roll-over sheet or electric tarpaulin system

Materials and Structure

The tipping body uses Q235 or Q345 high-strength structural steel, with a 4-10 mm floor plate, 3-8 mm side wall and a reinforced front wall. Cross bearers support the floor, and wear-resistant plate is optional for rubble and rock. The subframe is bolted and rubber-mounted to the chassis rails to spread tipping loads. The chassis is a carbon structural steel ladder frame with reinforced cross members. The cab is a welded steel body with tempered glass and anti-corrosion coating. Hydraulics use a hard-chrome-plated telescopic cylinder, high-pressure hose and steel pipe. The tailgate can be top-hinged or pendulum type with manual or automatic release. The load cover can be PVC tarpaulin or aluminum roll-over slats.

8x4 heavy tipper truck steel body and hydraulic cylinder for quarry work
Steel tipping body with reinforced front wall and hydraulic lifting system.

Applications

  • Quarries and borrow pits for crushed rock
  • High-volume aggregate, sand, gravel and stone yards
  • Construction earthworks and subgrade filling
  • Road construction and maintenance: base course and milling waste
  • Demolition and site clearance: rubble, concrete and timber removal
  • Mining support on road-legal sites
  • Plant hire and rental fleets

Customization

  • Side extensions, ladder rack, beacon bar and reverse alarm
  • Body heater for asphalt; grain discharge hatch
  • Top-hinged or pendulum tailgate, manual or automatic release
  • Manual roll-over sheet or electric tarpaulin system
  • Left-hand or right-hand drive; Euro II-V or Euro VI on request
  • AMT, rear air suspension, retarder and speed limiter
  • Cold-start and tropical packages for -20 to 45°C operation

Case Study

A construction and quarry haulage contractor in Panama ordered one batch of 8x4, 400 hp tipper trucks for heavy material hauling. The batch was delivered in April 2024 and had been in service for about 31 months at the time of the record. The client reported excellent performance and build quality; this is qualitative feedback without measured data. The order used one-to-one configuration on request, with quality control from design stage through to ex-works.

FAQ

What GVW and drive does the 8x4 heavy tipper use?

32,000 kg GVW with 8x4 drive, for high-volume quarry and aggregate work where local axle-load limits allow this class.

How much body volume does the 8x4 tipper carry?

About 16-22 m³. The full rigid range is 2-22 m³, with 4x2 about 2-6 m³ and 6x4 about 8-16 m³.

What payload range applies to rigid tippers?

The rigid tipper payload range is 1,500-20,000 kg, with the 8x4 class at the top of that range.

What is the tipping cycle?

Lifting takes 12-25 s, lowering 10-20 s, with a 45-55° tip angle and 160-200 bar working pressure.

Which engines and emissions are offered?

Diesel 4 or 6 cylinder engines, 2.8-9.5 L, 130-400 hp, with Euro II, III, IV or V; Euro VI on request.

How does the Panama case relate to this model?

The case involved one batch of 8x4, 400 hp tipper trucks for construction and quarry haulage, delivered in April 2024 and in service for about 31 months at record time.

What warranty and lead time apply?

12 months for major components with spare-parts support. Lead time is about 30 days for orders under 20 units; stock models ship faster.

Inquiry Information

Share your material density, site access, tip height, bridge and axle limits, and local registration class. ELORRY sales engineers will recommend the GVW, body volume and tipping direction for your route.

Tel: +86-13083602803
WhatsApp: +86-16638078903
Email: info@elorry-ind.com
Address: Zhengzhou City, Henan Province, China

Image Filename and Alt Suggestions

  • tipper-truck-8x4-heavy-quarry-haulage.png — 8x4 heavy tipper truck with steel body for quarry and aggregate haulage
  • tipper-truck-8x4-heavy-body-detail.png — 8x4 heavy tipper truck steel body and hydraulic cylinder for quarry work
  • tipper-truck-8x4-heavy-panama-case.png — 8x4 heavy tipper truck batch prepared for Panama construction and quarry contractor