{{ variable.name }}
This 8x4 rotator wrecker truck is the heavy recovery unit: 45,000 kg GVW, 360 degrees continuous rotation, a 25,000 kg crane station and 20,000-30,000 kg lift capacity at the top of the lift. It is configured for semi-trailer recovery, rolled or jackknifed units and ditch recovery.

SEO Title: 8x4 Rotator Wrecker Truck 45,000 kg GVW with 360 Degree Boom
Meta Description: 8x4 rotator wrecker truck with 45,000 kg GVW, 360 degree continuous rotation, 25,000 kg crane station and 20,000-30,000 kg lift for semi-trailer recovery.
URL Slug: /products/8x4-rotator-wrecker-truck
The boom is a 3-section telescopic welded box section with 12,300 mm lifting height and 10,710 mm working radius. Capacity is quoted at the working radius: 20,000-30,000 kg at the top of the lift and 8,300-12,500 kg fully extended. The rotator station is 25,000 kg maximum, 12,000 kg at 30 degrees retracted and 9,000 kg at 30 degrees extended.
| Drive configuration | 8x4 |
|---|---|
| GVW | 45,000 kg |
| Wheelbase | 1,950+4,250+1,300 mm |
| Boom | 3-section telescopic welded box section |
| Max lifting height | 12,300 mm |
| Max working radius | 10,710 mm |
| Boom angle | 0-60 degrees |
| Rotation | 360 degrees continuous on heavy-duty rotator |
| Lift capacity | 20,000-30,000 kg at top; 8,300-12,500 kg fully extended |
| Crane station | 25,000 kg max; 12,000 kg at 30 degrees retracted; 9,000 kg at 30 degrees extended |
| Winch | 1-2 hydraulic winches, 200 kN each on heavy models |
| Wire rope | 22 mm 6x25Fi+IWR1870, 60 m per drum, 5 m/min minimum |
| Underlift | 3,350 mm max effective length; 1,650 mm stroke |
| Fork height | Up to 1,835 mm |
| Outrigger spans | Front 6,200 mm, rear 4,030 mm, front-to-rear 7,760 mm |
| Engine | Diesel 95-315 hp, 3.9-8.9 L, Euro II to Euro V |
| Transmission | 6-speed mechanical on 8x4; automated manual optional |
| Gradability | 30 percent; minimum turning diameter 22 m; ground clearance 240 mm |
| Brakes | Air brake with ABS, exhaust brake, spring parking brake |
| Max speed | 90-95 km/h; towed vehicle about 40 km/h |
Rotation type, boom rating, underlift forks, winch count, outrigger type, left- or right-hand drive, engine emission, air suspension and hub reduction are selected at order. A load-moment limiter and pressure gauge are optional.

The boom and lifting frame use welded high-strength steel box section, H70 grade for key and stressed members, with Q345 reinforcement plates at pivot points. Cylinders have honed tubes and hard-chrome rods; outrigger beams use high-strength steel with forged or cast feet.
Semi-trailer recovery, rolled or jackknifed unit righting, tanker recovery, ditch recovery, highway concessionaire and road authority fleets, construction equipment recovery, ports, terminals, mining and quarry operations.
LHD or RHD, engine matched to local fuel, tropical cooling, cold-start package, warning equipment to local rules, boom rating, underlift forks, winch count and 360 degree rotator configuration.
Continuous rotation turns the boom into a mobile crane for a jackknifed semi-trailer, a rolled tanker or a unit in a ditch, without repositioning the truck for every lift.
The rotator station is 25,000 kg maximum, 12,000 kg at 30 degrees fully retracted and 9,000 kg at 30 degrees fully extended.
The 8x4 is rated 20,000-30,000 kg at the top of the lift and 8,300-12,500 kg fully extended, so the rating is always read with the working radius.
The heavy underlift lifts the axle or frame of a semi-trailer, and the 8x4 chassis and 45,000 kg GVW are quoted for semi-trailer recovery.
Front H-type and rear L-type outriggers give front 6,200 mm, rear 4,030 mm and front-to-rear 7,760 mm spans.
About 30-45 working days from down payment; 12 months for major components, with hydraulic valves and cylinders under supplier terms.
Send the unit to be recovered, heaviest unit weight, road and site conditions, climate and local warning-equipment rules. Sales engineers confirm rotator configuration, boom rating, underlift forks and winch count before order.
Tel +86-13083602803 | WhatsApp +86-16638078903 | Email info@elorry-ind.com
Henan Elorry Industrial Co., LTD., Zhengzhou, Henan, China | www.elorry-ind.com
Image IDs match the product gallery; use the filename and alt text for the final upload.
