O menu

9-in-1 Integrated Screw Compressor Airend for PTO and Engine Drive

Inventário:
SKU: 1028600097
Modelo: GCU30G

{{ variable.name }}

{{ value.name }}
Model GCU30G · 18-22 kW

9-in-1 Integrated Screw Compressor Airend for PTO and Engine Drive

A gearbox-integrated screw airend that combines the compression element, oil-gas separator tank, three filters and four valves in a single 96 kg assembly sized for power take-off and engine-driven air systems.

GCU30G integrated screw compressor airend with gearbox and separator tank, front view

GCU30G integrated airend: gearbox interface, airend and separator tank in one housing

Product Summary

The GCU30G is an integrated screw compressor airend built for vehicle builders and compressor assemblers who drive the compressor from the engine power take-off. The gearbox is part of the airend housing, so the unit couples to the drivetrain instead of needing a separate belt drive and mounting frame. It delivers 2.5-3.3 m³/min at 7 bar from an 18-22 kW input, with a working pressure band of 5 to 12.5 bar and a speed range of 2,900-6,000 rpm. Oil carry-over stays below 2 ppm (design limit 3 ppm), maximum discharge temperature is 105 °C, and sound pressure is held at or below 75 dB(A). At 96 kg net and 560 x 490 x 580 mm excluding the air filter assembly, the assembly fits chassis bays where a separate airend, receiver and valve stack would not.

Key Features

  • Gearbox integration for PTO and engine-driven systems. The drive interface is machined into the integrated housing, removing separate coupling and belt alignment work from the chassis build.
  • Nine-in-one configuration. Screw airend plus oil-gas separator tank with built-in coarse separator, three filters (external fine oil separator, oil filter, air filter optional) and four valves (intake control, minimum pressure, thermostat, safety) arrive as one part number, which cuts sourcing lines and potential leak points.
  • Precision rotor set. Forged alloy steel rotors machined to the German-designed UV patented profile over 20+ steps at micron-level accuracy; the profile is covered by CNIPA invention patent ZL2012 1 0087353.0.
  • Heavy-duty bearings and triple shaft sealing. SKF heavy-duty rolling bearings with triple-sealing technology support long service intervals in vibrating mobile installations.
  • Low oil carry-over and controlled noise. Below 2 ppm oil carry-over (design 3 ppm) and 75 dB(A) or less suit underframe and bodywork-mounted positions.
  • Compact integrated size. 96 kg net weight and 560 x 490 x 580 mm keep the air source inside tight chassis envelopes.

Technical Specifications

ModelGCU30G
TypeIntegrated screw airend with gearbox; PTO / engine driven
Rated power18-22 kW
Speed2,900-6,000 rpm
Free air delivery at 7 bar2.5-3.3 m³/min
Working pressure range5 bar minimum / 12.5 bar maximum
Max discharge temperature105 °C
Oil carry-overBelow 2 ppm (design 3 ppm or less)
Noise level75 dB(A) or less
Net weight96 kg
Dimensions (L x W x H)560 x 490 x 580 mm, excluding air filter assembly
Integrated configuration9-in-1: airend + oil-gas separator tank + 3 filters + 4 valves

Models and Options

  • GCU30G at 18-22 kW with pressure settings across the 5-12.5 bar band; 7 bar is the reference point for the published free air delivery.
  • Air filter supplied as an option for assemblers who prefer their own intake filtration.
  • Both conventional and 9-in-1 integrated architectures are available from the same supplier, so one programme can mix formats.
  • High-grade cast iron housing is standard; an aluminium-alloy housing is under development.

Materials and Structure

  • Housing: high-grade cast iron (aluminium-alloy housing under development).
  • Screw rotors: forged alloy steel, German-designed UV patented profile, 20+ precision machining steps.
  • Bearings: SKF heavy-duty rolling bearings.
  • Shaft seal: triple-sealing technology.
  • Oil separation: built-in coarse separator inside the oil-gas tank plus oversized external fine separator.
Valve and filter arrangement on the GCU30G nine-in-one screw airend

The 9-in-1 layout groups intake control, minimum pressure, thermostat and safety valves on one body

Applications

Construction machinery

Concrete mixer truck and crane chassis pneumatic systems, bulk powder unloading.

Compressor assemblers

Core compression unit for stationary and vehicle packages with standardised mounting interfaces.

Heavy-duty commercial vehicles

Braking and auxiliary air supply on long-haul chassis.

Special vehicles

Compact bodywork-mounted air source where installation space is limited.

Customization

For high-altitude programmes the same platform is configured with an altitude oxygen compensation intake port and a -40 °C to +50 °C operating design. Assemblers receive standardised mounting interfaces and technical drawings to shorten integration work. Housing material, intake filtration and pressure setting are selected at order stage; the air filter is optional when the customer supplies their own intake group.

Case Study

Construction machinery OEM (XCMG class) - approx. 600 units per year, 3 years

Application: concrete mixer truck and crane chassis pneumatic system, bulk powder unloading. Reported result: field failure rate below 1% with unscheduled downtime reduced significantly. The dust-proof design, 35% smaller volume and easy chassis installation were the deciding factors for this programme.

Drive side and mounting base of the GCU30G integrated screw compressor airend

Mounting base and drive side of the integrated airend

FAQ

What is included in the 9-in-1 configuration?

The screw airend, an oil-gas separator tank with built-in coarse separator, three filters (external fine oil separator, oil filter, optional air filter) and four valves: intake control valve, minimum pressure valve, thermostat valve and safety valve.

Which pressure can I specify?

The GCU30G works between 5 bar minimum and 12.5 bar maximum. Published free air delivery of 2.5-3.3 m³/min is stated at 7 bar; confirm the duty point with our engineers before locking the drivetrain ratio.

Can the unit run from an engine power take-off?

Yes. The airend is built with an integrated gearbox for PTO and engine-driven systems, which is the intended mounting method for vehicle installations.

Which certifications come with the unit?

CE certificate CE-WSD-GCU-2023-001 issued by TUV Rheinland under MD 2006/42/EC, EN 1012-1, EN 60204-1 and EN ISO 1217 covering integrated airends from 2.2 to 45 kW; ISO 9001:2015 by SGS (CN-ISO9001-WSD-2024-012); and IATF 16949 automotive quality management system certification.

How is oil carry-over kept below 2 ppm?

By combining the built-in coarse separator in the oil-gas tank with an oversized external fine separator, which also reduces the loading on downstream dryers and filters.

Do you provide drawings for chassis integration?

Yes. Standardised mounting interfaces and technical drawings are supplied to assemblers; the drawings describe the mounting points and interface dimensions of the delivered unit.

What lead time applies?

In the plateau locomotive retrofit programme, drop-in replacement units were delivered in 4-5 weeks against 8-10 weeks for imported airends. Current schedules are confirmed per order.

Image Filenames and Alt Suggestions

  • gcu30g-integrated-airend-9-in-1-gearbox-front.png - GCU30G integrated screw compressor airend with gearbox and separator tank, front view
  • gcu30g-integrated-airend-valve-filter-group.png - Valve and filter arrangement on the GCU30G nine-in-one screw airend
  • gcu30g-integrated-airend-drive-side.png - Drive side and mounting base of the GCU30G integrated airend
  • gcu30g-integrated-airend-dimension-view.png - Overall dimensions of the 96 kg GCU30G airend assembly

Inquiry Information

Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), founded 1996, 20,000 m² production facility, 12,000 units annual output. Tell us your drive type, working pressure, required free air delivery and chassis interface so we can confirm the correct GCU30G configuration.

Email: service@woyo.cn · Tel: +86 510 8599 6655 · WhatsApp: +86 189 1237 9878 · Address: No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China