The BH30-2012 is a floor-mounted compound emergency shower and eyewash built in 304 stainless steel. It combines a 2100 mm shower head and a 1050 mm eyewash basin on one 2480 mm column, so a worker exposed to a chemical splash can flush the body and the eyes at a single station. Water flow starts within 1 second through a push handle, delivering 120-180 L/min at the shower and at least 1.5 L/min at the eyewash. The unit is supplied with a 304 filter sprinkler, a two-piece ball valve, an adjustable cow-horn bend, a fixed soft-rubber anti-dust cover and a luminous aluminium alloy indicator that helps locate the station in low light.
304 stainless steel body - resists corrosion from acid and alkali splash in chemical, petrochemical and metalworking areas, extending service life in wet environments.
Shower flow 120-180 L/min - high-volume flushing at standard water pressure of 0.25-0.4, sized for full body decontamination.
Eyewash flow of at least 1.5 L/min - a lower-pressure soft flow so the eyes are rinsed without adding irritation.
Activation within 1 second by push handle - shortens the time between exposure and the first flush of water.
Floor-mounted 2480 mm column - a fixed station that leaves both hands free during flushing, with the water inlet set at 1600 mm for practical feed-line connection.
ANSI Z358.1-2014 and CE certified range - the manufacturer holds ANSI Z358.1-2014, CE, ISO 9001 and ISO 45001 certificates covering emergency eyewash stations, helping EHS teams complete compliance documentation.
Technical Specifications
Model
BH30-2012
Series
Compound series
Material
304 stainless steel
Installation Type
Floor-mounted
Activation
Push handle
Overall Height
2480 mm
Shower Head Height
2100 mm
Water Inlet Height
1600 mm
Eyewash Height
1050 mm
Drainage Height
133 mm
Water Inlet and Outlet
DN32
Shower Flow Rate
120-180 L/min
Eyewash Flow Rate
at least 1.5 L/min
Standard Water Pressure
0.25-0.4
Start Speed
Within 1 second
Sprinkler
304 filter
Ball Valve
Two-piece ball valve
Cow-horn Bend
Adjustable flow
Anti-dust Cover
Fixed soft rubber
Indicator
Luminous aluminium alloy
Water Discharge Range
508 mm, at a distance of 1524 mm from the surface
Dimensions
72.2 x 29.5 x 27.5 cm
Weight
16 kg
Warranty
One year
Models and Options
Model BH30-2012 is the compound, floor-mounted configuration in 304 stainless steel, matching the compound series. The wider emergency shower and eyewash range also covers electric heat tracing units for freezing conditions and portable stations for remote or temporary work sites. Send your ambient conditions and mounting layout, and we will match the correct configuration and confirm the specification in writing.
Materials and Structure
The unit is made in 304 stainless steel (304 SS). The sprinkler head carries a 304 filter so debris stays out of the shower flow. A two-piece ball valve controls the main water line, and an adjustable cow-horn bend allows the eyewash flow to be trimmed on site. The eyewash outlets sit beneath a fixed soft-rubber anti-dust cover that keeps dust off the nozzles between uses, while a luminous aluminium alloy indicator marks the station in low-light areas. The footprint measures 72.2 x 29.5 x 27.5 cm and the assembled unit weighs 16 kg.
Applications
Chemical ManufacturingPharmaceuticals and BiotechnologyLaboratoriesOil, Gas and PetrochemicalMetalworking and ManufacturingAgriculture and Pesticide HandlingFood ProcessingMining
Typical installations include chemical plants, pharmaceutical factories, laboratories, petrochemical facilities, battery manufacturing plants and university research laboratories, where the unit is used as part of an EHS emergency response station or a safety retrofit.
Customization
Configuration requests are reviewed project by project. Share your water pressure, ambient temperature, corrosive atmosphere conditions, area classification and installation layout, and our team will confirm which options in the range fit the site, including freeze-protected or portable configurations. Any request that falls outside standard specifications is confirmed for feasibility before the order is placed.
Frequently Asked Questions
Which certifications cover this emergency shower and eyewash?
The manufacturer holds ANSI Z358.1-2014 (certificate CHSH25071073147), CE (CLSH25071073148), ISO 9001 (288SCC24Q-SHBH002798S) and ISO 45001 (288SCC19S-SHB000647R2S). All of these certificates cover emergency eyewash stations.
What water supply does the unit require?
The water inlet and outlet are DN32, and the standard water pressure is 0.25-0.4.
How quickly does the station activate?
Water flow starts within 1 second through the push handle.
What are the shower and eyewash flow rates?
The shower delivers 120-180 L/min and the eyewash delivers at least 1.5 L/min.
How is it installed and how tall is it?
It is floor-mounted with an overall height of 2480 mm. The shower head is at 2100 mm, the eyewash at 1050 mm, the water inlet height is 1600 mm and the drainage height is 133 mm.
What material is used and what does the unit weigh?
Construction is 304 stainless steel. The packed dimensions are 72.2 x 29.5 x 27.5 cm and the weight is 16 kg.
What warranty is provided?
Each unit carries a one-year warranty.
Which industries use this compound station?
It is used in chemical manufacturing, pharmaceuticals and biotechnology, laboratories, oil, gas and petrochemical, metalworking and manufacturing, agriculture and pesticide handling, food processing and mining.
