{{ variable.name }}
Model GCU11 | 4-7.5 kW | 16 bar class | 0.6-1.0 m3/min FAD at 7 bar | 55 kg
The GCU11 is a high-pressure integrated screw compressor airend built for vehicle-mounted and cabinet-free air supply. It combines the screw airend, an oil-gas separator tank with built-in coarse separator, three filter positions and four valves in a single body measuring 378 x 350 x 415 mm. Drive power spans 4 to 7.5 kW at 2900 to 6500 rpm, free air delivery is 0.6 to 1.0 m3/min at 7 bar, and the unit operates between 5 and 16 bar. Oil carry-over stays below 2 ppm in the design, maximum discharge temperature is 105 C and noise is held at or below 75 dB(A). At 55 kg net weight, one technician can position the block on a chassis rail or skid frame before plumbing.

Airend, separator tank with built-in coarse separator, three filter positions and four valves share one housing, so assemblers connect fewer hoses and shorten the frame.
Maximum working pressure is 16 bar with a 5 bar minimum. For duties at 16 bar and above, the external fine separator, oil filter and safety valve must be rated at 20 bar or higher.
Forged alloy steel rotors use a German-designed UV patented profile (CNIPA patent ZL2012 1 0087353.0), produced over more than 20 machining steps with micron-level accuracy.
SKF heavy-duty rolling bearings carry the rotor load, while triple-sealing technology closes the shaft seal paths at the drive end.
A built-in coarse separator plus an oversized external fine separator hold oil carry-over below 2 ppm in the design, protecting downstream dryers and valves.
378 x 350 x 415 mm envelope excluding the air filter assembly, 105 C maximum discharge temperature and noise at or below 75 dB(A).
| Model | GCU11 |
|---|---|
| Configuration | 9-in-1 integrated airend |
| Power | 4-7.5 kW |
| Speed | 2900-6500 rpm |
| Free air delivery at 7 bar | 0.6-1.0 m3/min |
| Working pressure, max / min | 16 / 5 bar |
| Max discharge temperature | 105 C |
| Oil carry-over | Below 2 ppm (design at or below 3 ppm) |
| Noise | At or below 75 dB(A) |
| Net weight | 55 kg |
| Dimensions (L x W x H) | 378 x 350 x 415 mm, excluding air filter assembly |
| Housing material | High-grade cast iron (aluminium-alloy housing under development) |
| Rotor material | Forged alloy steel, UV patented rotor profile |
| Bearings | SKF heavy-duty rolling bearings |
| Shaft seal | Triple-sealing technology |
| High-pressure accessories | External fine separator, oil filter and safety valve rated at 20 bar or higher for 16 bar duty |
The GCU11 covers the 4-7.5 kW band across 2900-6500 rpm, so an assembler can pick the duty point that matches the required delivery instead of oversizing the block. The air filter is an optional external item; the external fine oil separator and the oil filter belong to the 9-in-1 set. For 16 bar and higher operation, those three items must be specified at 20 bar rating or above. Conventional and 9-in-1 integrated architectures are both available from one source, which lets a single supplier serve several assembly platforms.
The housing is high-grade cast iron, with an aluminium-alloy version under development. Screw rotors are forged alloy steel, machined to the German-designed UV patented profile through more than 20 precision steps to micron-level accuracy. Rotor shafts run in SKF heavy-duty rolling bearings, and the shaft seal applies triple-sealing technology. Separation is two stage: a coarse separator is built into the oil-gas separator tank and an oversized external fine separator finishes the job. Four valves, namely intake control, minimum pressure, thermostat and safety, sit on the block alongside the three filter positions.

Because the GCU11 ships as a core compression unit, configuration is agreed around the assembly platform: filter set-up, valve set-up, interface definition and documentation. Standardised mounting interfaces and technical drawings are provided to compressor assemblers, and batch consistency is maintained for repeat build programmes. Buyers with a specific pressure, flow or envelope requirement can raise it during inquiry and the matching option will be confirmed against the 9-in-1 architecture.
An air compressor assembler supplying complete-unit OEM packages has taken approximately 300 GCU11-class units per year for two years. The units serve as the core airend for both stationary and vehicle air compressor packages. Standardised mounting interfaces and stable batch quality reduced assembly time and rework, and the assembler sources both conventional and 9-in-1 architectures from the same supplier.
Which parts must change for 16 bar operation?
For duties at 16 bar and above, the external fine separator, oil filter and safety valve must be rated at 20 bar or higher. Below that pressure the standard 9-in-1 set applies.
What oil carry-over can the GCU11 achieve?
Design oil carry-over is below 2 ppm, with the specification set at 3 ppm or lower. Separation is handled by a built-in coarse separator and an oversized external fine separator.
Is the air filter included in the block?
No. The air filter is an optional external item. The external fine oil separator and oil filter are part of the 9-in-1 configuration.
What envelope and weight should the frame allow for?
Allow 378 x 350 x 415 mm excluding the air filter assembly, and 55 kg net weight for the block itself.
Which certifications apply to this airend?
CE certification was issued by TUV Rheinland under CE-WSD-GCU-2023-001 against MD 2006/42/EC, EN 1012-1, EN 60204-1 and EN ISO 1217 for integrated screw airends and vehicle-mounted compressors from 2.2 to 45 kW. The company also holds ISO 9001:2015 certified by SGS and IATF 16949.
How is the block matched to a drive motor?
The GCU11 runs from 4 to 7.5 kW across 2900-6500 rpm. Share the duty point and the target delivery at 7 bar, and the matching speed and pulley arrangement can be confirmed.
Send the duty point, working pressure and mounting constraints with your inquiry so the 9-in-1 configuration can be confirmed against your platform.
Email: service@woyo.cn | Tel: +86 510 8599 6655 | WhatsApp: +86 189 1237 9878
Wuxi Woyo Superdo Compressor Co., Ltd. (WOLXAIR), No.5 Changkang Road, Mashan, Binhu District, Wuxi, Jiangsu, China