Compound Emergency Shower and Eyewash BH30-1011 in 304 Stainless Steel

The BH30-1011 is a compound emergency shower and eyewash built for sites where a chemical splash or dust exposure must be flushed immediately. A single floor-mounted column carries both the overhead deluge shower and the eyewash station, so one unit covers full-body and eye decontamination at the same point of work. The station stands 2480 mm tall with a 2100 mm shower head and a 1050 mm eyewash, and both outlets are fed from one DN32 inlet and drain. The body is finished in yellow for high visibility, and the shower opens by push handle with a start speed within one second.

• 304 stainless steel and ABS construction — resists corrosion from acid, alkali and other chemical splashes common in process plants.
• Shower flow of 120–180 L/min — supplies a high-volume full-body rinse for larger spills.
• Eyewash flow of ≥1.5 L/min — directs a controlled low-pressure stream at the eyes and face.
• Activation within 1 second by push handle — shortens the gap between exposure and flushing.
• Luminous aluminum alloy indicator — helps workers locate the station in low light or smoke.
• Fixed soft rubber anti-dust cover — keeps dust and debris out of the eyewash bowl between uses.

This listing covers the BH30-1011 in the Compound series, supplied floor-mounted with push-handle activation and a yellow finish. The adjustable cow-horn bend lets the flow be trimmed to the required eye-flushing pattern on site.

The column, piping and bowl are produced in 304 stainless steel with ABS components. Water enters and drains through a DN32 connection. The shower head uses PP with a 304 stainless steel filter across 101.6 mm sprinkler spacing, and a two-piece ball valve isolates the supply. A fixed soft rubber anti-dust cover protects the eyewash, while a luminous aluminum alloy indicator marks the station position. The complete unit weighs 16 kg and measures 72.2 x 29.5 x 27.5 cm for shipping and handling.

• Chemical manufacturing
• Pharmaceuticals and biotechnology
• Laboratories
• Oil, gas and petrochemical facilities
• Metalworking and manufacturing
• Agriculture and pesticide handling
• Food processing
• Mining

Working environments covered include high-temperature areas, corrosive atmospheres from acid or alkali splashes, dusty areas and normal-temperature indoor laboratories.

The BH30-1011 is supplied in its standard yellow finish with floor-mounted installation and push-handle activation. Projects that involve outdoor winter installation, corrosive atmospheres or explosive-risk zones should share their working conditions with our engineering team so the correct configuration and protection level can be reviewed before ordering.

• ANSI Z358.1-2014 — GLOBAL TESTING SERVICES CO., LTD, valid to 2030-07-29
• CE — GLOBAL TESTING SERVICES CO., LTD, valid to 2030-07-29
• ISO Quality Management Systems — Shanghai Center Certification Co., Ltd., valid to 2027-01-14
• ISO Occupational Health & Safety Management Systems — Shanghai Center Certification Co., Ltd., valid to 2028-08-11