{{ variable.name }}
A 6x4 sprinkler truck built for stockpiles, demolition faces and haul roads, with a 30-60 m fog cannon at 20-40 L/min added to the standard front, rear and side spray circuits.

The standard sprinkler bar binds dust along the road it drives over. A stockpile, a demolition face or a wide haul road needs water thrown up and out, which is what the fog cannon does. This build pairs a 6x4 chassis and a 12,000-20,000 L tank with a 30-60 m fog cannon on 360 degrees rotation at 20-40 L/min, while keeping the front flush, rear bar and side spray available for the access roads. The result is one machine doing both jobs on a mine, quarry, port or demolition site: fine fog where the dust is generated, and a wide spray band on the running surface. The hydraulic and spray circuits are function tested before shipment, and the tank uses a 120-micron epoxy lining against silt-heavy site water.
A 30-60 m throw with 360 degrees rotation puts fine water on stockpile faces and demolition work above the level a road bar can reach.
20-40 L/min output keeps the fog fine enough to settle dust rather than soak the surface, which extends working time between refills.
The front flush, rear bar and side spray stay on separate valves, so access and haul roads are watered on the way to and from the stockpile.
12,000-20,000 L tank, 6 mm shell above 12,000 L, pump 40-90 m3/h at 45-90 m head and 6-8 m suction lift from a pond or lagoon.
The rear-platform water cannon remains fitted, 28-40 m at -10 to +60 degrees, for tree lines, bridge soffits and small fire duty.
100 percent pre-shipment check covers tank leak test, pump flow and pressure, spray width and cannon range measurement, valve and alarm check.
| Item | Specification |
|---|---|
| Chassis | 6x4 |
| Tank volume | 12,000-20,000 L |
| Tank shell | Q235B or Q345B carbon steel 5-6 mm, epoxy lining 120 microns or more |
| Fog cannon throw | 30-60 m |
| Fog cannon flow | 20-40 L/min |
| Fog cannon rotation | 360 degrees |
| Rear water cannon | 28-40 m, 360 degrees, -10 to +60 degrees elevation |
| Rear spray bar | 10-18 m, height 300-800 mm above ground |
| Front flush | 8-16 m, jet or fog pattern |
| Pump | PTO-driven self-priming centrifugal, 40-90 m3/h, head 45-90 m |
| Suction | 3-5 m hose, stainless strainer, lift 6-8 m |
| Working pressure | 0.3-0.8 MPa, main pipe DN65, nozzle orifice 16-22 mm |
| Engine | Diesel 90-270 hp, Euro II to Euro V |
| Transmission | Manual 5-10 forward speeds, automated manual optional |
| Speed | Maximum 90-95 km/h, spraying 8-20 km/h |
| Working temperature | -20 to 45 degrees C, tropical cooling or cold-start package |
Ranges apply across the build; the final cannon throw, flow and tank volume are confirmed on the order sheet.
The fog cannon package is ordered on a 6x4 chassis with a 12,000 L, 15,000 L or 20,000 L tank. Further options include a stainless 304 tank shell, a 10-15 MPa high-pressure washer with 10-20 m hose and gun, a pesticide or disinfectant dosing unit with separate tank and metering valve, wireless remote control and a sleeper cab.
The fog cannon barrel is stainless steel or FRP. The tank shell is Q235B or Q345B at 5-6 mm with dished heads one gauge thicker, baffles every 1.5-2 m and a 120-micron epoxy interior; stainless 304 is optional where water quality demands it. Piping is galvanised DN65 with flanged joints, valves are brass or stainless ball valves with pneumatic or electric actuators, and the pump runs a cast iron casing, bronze impeller, mechanical seal and stainless shaft sleeve. The platform, ladder and handrail are galvanised steel or aluminium checker plate on a Q235 sub-frame, with stainless fasteners throughout.
Cannon throw, flow rate, tank volume and spray widths are selected against the dust source height, the area to be covered and the distance from the draw point. Where a site holds a lagoon or settling pond, the suction set and pump flow are matched to it; where dust is generated at height, cannon throw becomes the deciding figure. Sales engineers review the site layout before the specification is fixed.
Reach and height. The bar lays a band 10-18 m wide on the surface, while the fog cannon throws 30-60 m at 360 degrees, covering stockpile faces and demolition work the bar cannot reach.
20-40 L/min, which keeps the spray fine enough to settle airborne dust rather than flood the surface.
Front, rear, side and cannon sit on separate valve circuits and can run alone or in combination, controlled from the cab with manual override at the rear platform.
Suction lift of 6-8 m through a 3-5 m hose with stainless strainer draws from canal, pond, well, reservoir or storage tank; a hydrant inlet and outlet are also fitted.
The interior carries an epoxy anti-corrosion coating of 120 microns or more, and a stainless 304 shell is available as an option.
Tank leak test, pump flow and pressure test, spray width and cannon range measurement, valve and alarm check, brake test and road test, with a tank test report supplied.
Send the site layout, dust source height, area to be covered and water source. Cannon throw, flow and tank volume are then confirmed against the duty.
Email: info@elorry-ind.com | WhatsApp: +86-16638078903 | Tel: +86-13083602803
Henan Elorry Industrial Co., LTD. - Zhengzhou, Henan, China | www.elorry-ind.com

