O menu

Single-Stage 4.0 MPa Booster Air Compressor for Laser Cutting SLTPB-3.0

Inventário:
SKU: 2558586041
Modelo: SLTPB-4.0/10-40、SLTPB-8.0/10-40、SLTPB-10/10-40、SLTPB-3.0/10-40、SLTPB-6.0/10-40、SLTPB-12/10-40、SLTPB-8.0/10-40、SLTPB-16/10-40

{{ variable.name }}

{{ value.name }}
  • SEO TitleSingle-Stage 4.0 MPa Booster Air Compressor for Laser Cutting SLTPB-3.0
  • Meta DescriptionSLTPB-3.0/10-40 single-stage booster air compressor lifts 1.0 MPa inlet air to 4.0 MPa at 3.0 Nm³/min for laser cutting cells. Cast iron and stainless steel build.
  • URL Slug/products/booster-air-compressor-sltpb-3-0-laser-cutting

Single-Stage 4.0 MPa Booster Air Compressor for Laser Cutting SLTPB-3.0

Product Summary

The SLTPB-3.0/10-40 is the compact entry size in Sollant's single-stage high-pressure booster series. It accepts air already compressed to 1.0 MPa and boosts it to 4.0 MPa at 3.0 Nm³/min, the pressure band used by laser cutting heads and other dedicated high-pressure points. Because the booster sits downstream of an existing low- or medium-pressure compressor, it can be tied into a plant air system without extensive modification and without buying a separate high-pressure compressor package.

Compression is completed in a single stage. The core assembly is built from cast iron, aluminium alloy and stainless steel, and the unit runs smoothly with minimal noise and vibration, which helps when it is installed close to a cutting cell. An intelligent control system with multiple safety protection features handles pressure regulation and fault response, so the machine can run continuously with limited supervision.

  • 3.0 Nm³/min
  • 1.0 MPa suction
  • 4.0 MPa discharge
  • Single compression stage
SLTPB-3.0/10-40 high-pressure booster air compressor unit, front view
SLTPB-3.0/10-40 high-pressure booster air compressor

Key Features

1.0 MPa Inlet, 4.0 MPa Discharge

Single-stage compression raises 1.0 MPa suction air to 4.0 MPa, so your existing 10 bar compressor stays in place and pressure is added only where it is needed.

3.0 Nm³/min Point-of-Use Flow

The smallest capacity in the 3.0 to 16 Nm³/min series, sized for one laser cutting cell or a single high-pressure branch instead of a whole plant.

Works With Standard Compressors

The booster integrates with standard low- or medium-pressure air compressors without extensive modification, cutting implementation cost and installation time.

Smooth, Low-Vibration Running

Minimal noise and vibration allow the unit to sit beside the cutting workstation without disturbing operators.

Intelligent Control and Safety Protection

An intelligent control system plus multiple safety protection features keep the high-pressure supply stable and safe during unattended shifts.

Durable Core, Low Upkeep

Cast iron, aluminium alloy and stainless steel components support a long service life and low long-term maintenance cost.

Technical Specifications

ParameterSLTPB-3.0/10-40
ModelSLTPB-3.0/10-40
Capacity3.0 Nm³/min
Suction pressure1.0 MPa
Discharge pressure4.0 MPa
Compression stage1
Speed710–790 rpm
Motor powerSeries ratings from 15 kW to 2×30 kW; the rating of this build is confirmed on order
WeightSeries range 560–2100 kg; unit weight confirmed on order
MaterialsCast iron, aluminium alloy, stainless steel
ControlIntelligent control system with multiple safety protection features

Models and Options

ModelCapacity (Nm³/min)SuctionDischarge
SLTPB-3.0/10-403.01.0 MPa4.0 MPa
SLTPB-4.0/10-404.01.0 MPa4.0 MPa
SLTPB-6.0/10-406.01.0 MPa4.0 MPa
SLTPB-8.0/10-408.01.0 MPa4.0 MPa
SLTPB-10/10-40101.0 MPa4.0 MPa
SLTPB-12/10-40121.0 MPa4.0 MPa
SLTPB-16/10-40161.0 MPa4.0 MPa

Every size in the series carries the same /10-40 designation: 1.0 MPa inlet and 4.0 MPa discharge. Flow is the variable, so a laser shop can start at 3.0 Nm³/min and step up to 4.0, 6.0, 8.0, 10, 12 or 16 Nm³/min as high-pressure consumers are added. Motor power ratings published for the series are 15 kW, 2×15 kW, 15+22 kW, 22 kW, 2×22 kW, 30 kW and 2×30 kW.

Materials and Structure

The compression end and frame use cast iron for rigidity and heat dissipation, with aluminium alloy and stainless steel in the flow path and trim. A single-stage layout keeps the number of moving assemblies low, which supports the smooth, low-vibration operation described for the series. The skid is compact, so it can be placed in a corner of the workshop or moved with a forklift when a production line is rearranged — installation, commissioning and transport stay straightforward.

Applications

Laser cutting is the primary duty for this size, where the booster supplies the high-pressure air stream the cutting head needs. The same 4.0 MPa platform is used for PET bottle blowing, fire protection systems and petrochemical plants, and in drilling support work such as high-pressure gas injection and airtightness testing. Tell us the consumption of your cutting cell and the number of shifts per day and we will confirm whether 3.0 Nm³/min is the right size or whether a larger model in the series fits better.

Customization

Sollant supports OEM/ODM customization on its compressed air equipment. Units are covered by an air compressor CE declaration of conformity (ECM, certificate 0P230209.SSE0Q23, valid until 8 February 2028, referencing EN ISO 12100:2010, EN 60204-1:2018 and EN 1012-1:2010) and the company holds ISO 14001:2015 certification (NOA, 05126E00664R053). Original spare parts and 24/7 engineering after-sales support are available. Please state the required documents for your market so they can be confirmed in the quotation.

FAQ

Can this booster work with my existing 1.0 MPa screw compressor?

Yes. The unit is designed with 1.0 MPa suction pressure and is installed downstream of the existing compressor, raising the air to 4.0 MPa without extensive modification of the plant air system.

What flow and pressure does the SLTPB-3.0/10-40 deliver?

3.0 Nm³/min at 4.0 MPa discharge from 1.0 MPa suction, using a single compression stage at 710–790 rpm.

How much motor power and weight should I plan for?

Series motor ratings run from 15 kW to 2×30 kW and weights from 560 kg to 2100 kg. The exact figures for the 3.0 Nm³/min build are confirmed with the order specification.

Is an oil-free version available?

Oil-free piston booster configurations are supplied for food-contact PET blowing, as shown in our Kyrgyzstan bottle-blowing project. Tell us the air-quality class your laser cutting process requires and we will confirm the matching lubrication configuration.

Can it run continuously?

Yes. The series is described for continuous, long-term operation with a stable high-pressure supply, supported by the intelligent control and safety protection package.

What certification documents come with the unit?

An air compressor CE declaration of conformity (ECM, 0P230209.SSE0Q23) valid to 8 February 2028, plus the company ISO 14001:2015 certificate. Confirm any additional market-specific documents with our team before ordering.

How is the unit installed and maintained?

The compact skid can be positioned near the point of use and moved by forklift. Routine maintenance is limited because of the small number of moving assemblies; in oil-free execution the carbon build-up caused by oil emulsification is avoided, which simplifies daily servicing.

Inquiry Information

Specify your high-pressure point

Send us the inlet pressure, required discharge pressure and flow, power supply and available floor space. Our engineers will confirm the model and configuration.

Image Filename and Alt Suggestions

Suggested file nameAlt text
booster-air-compressor-sltpb-3-0-front.pngSLTPB-3.0/10-40 high-pressure booster air compressor unit, front view
booster-air-compressor-sltpb-3-0-discharge-side.pngDischarge side of the single-stage booster air compressor rated to 4.0 MPa