O menu

Sweeping and Washing Road Sweeper Truck with 8-15 MPa Water Pump

Inventário:
SKU: 1845807375
Modelo: Road Sweeper Truck

{{ variable.name }}

{{ value.name }}

Sweeping and Washing Road Sweeper Truck with 8-15 MPa Water Pump

Product summary. A sweeping and washing truck that pairs the standard twin disc brush and vacuum suction layout with a high-pressure washing circuit. A piston or centrifugal pump delivering 8-15 MPa feeds a separate washing boom, a hand-held spray gun and the spray bars at the brushes and nozzle. Water tanks run from 1 to 10 m3 and dust bins from 2 to 12 m3, and the truck can be specified with a drinking-water tank or an optional fog cannon for construction dust suppression.

sweeping and washing road sweeper truck with high pressure spray bar and washing boom

Sweeping and washing road sweeper truck with the high-pressure spray circuit running.

Key Selling Points

8-15 MPa washing pumpA high-pressure piston or centrifugal pump supports pavement washing, sticky spill removal and silt flushing, not only dry debris pickup.
Separate washing boomThe boom and the hand-held spray gun allow spot cleaning around bins, bus stops, kerb lines and signposts without moving the sweeping head.
Spray at the cutting pointHigh-pressure spray bars at the brushes and at the suction nozzle bind dust before the brush touches the surface.
Tank level controlA level gauge and low-water alarm on the combined water and debris body protect the washing pump from running dry.
Air-duct conversionRecirculation or direct suction mode keeps the same truck working through dry spells, after rain and on wet leaves.
Optional fog cannonFor sites that need airborne dust suppression alongside road washing.

Technical Specifications

ItemSpecification
FunctionMechanical sweeping with vacuum suction, water-spray dust suppression and high-pressure pavement washing
Washing pumpHigh-pressure piston or centrifugal, 8-15 MPa
Washing equipmentSeparate washing boom and hand-held spray gun; spray bars at brushes and suction nozzle
Water tank1-10 m3, stainless steel 304 or carbon steel with anti-corrosion lining
Dust bin2-12 m3, rear tipping or rear door discharge, 20-40 s per cycle
Tank layoutWater tank and dust bin combined in one body with level gauge and low-water alarm
Filling and drainingGravity fill or hydrant connection; drain valve at the lowest point
Water consumption0.03-0.10 L per m2 in light dust-suppression mode, adjustable at the spray valve
Sweeping width2.2-3.6 m adjustable; kerb brush on left, right or both sides
Working area20,000-90,000 m2/h depending on sweeping width and working speed
Maximum particle diameter100-150 mm at the suction nozzle
Engine / auxiliary engineDiesel 85-250 kW, Euro II to Euro V / 57-100 kW for fan and hydraulic pump
Working / transport speed3-20 km/h / 90-100 km/h
OptionsDrinking-water tank, fog cannon, hand-held spray gun
Working temperature-20 to +50 degrees C; tropical cooling or cold-start package available

Models and Options

Water tank volume from 1 to 10 m3 and dust bin volume from 2 to 12 m3 are quoted per route, with stainless steel 304 or lined carbon steel for the water tank. Sweeping width runs from 2.2 to 3.6 m on a 4x2 or 6x4 chassis, with a kerb brush on the left, the right or both sides. Engine output from 85 to 250 kW in Euro II to Euro V, manual or automated manual transmission, left-hand or right-hand drive, and a drinking-water tank, fog cannon or extra hand-held spray gun as specified options.

Materials and Structure

Body and tanks are Q235/Q345 carbon steel, shot-blasted, epoxy-primed and polyurethane topcoated, with stainless steel 304 for the water tank and dust bin in humid or corrosive service. The dust bin floor and discharge door are 4-6 mm wear-resistant steel. The washing circuit uses a gear or piston pump, hard chrome-plated cylinder rods and high-pressure rubber hoses with steel fittings. Brushes are polypropylene or nylon filament discs with replaceable segments, and the nozzle carries replaceable rubber or polyurethane wear strips with EPDM seals and skirts.

Applications

  • Road washing and dust control on municipal streets
  • Construction site housekeeping and concrete batching plants
  • Industrial yards, ports and logistics parks
  • Post-flood silt removal and disaster cleanup
  • Food and beverage plants needing dust and spill control
  • Tourism areas, beaches and event venues

Customization

The washing circuit is sized to the job: pump pressure and spray volume are set against the surface and the spill type, and the water tank is sized against the filling points on the route. Sales engineers also confirm the sweeping width, brush layout, bin volume, drive side and emission level so the washing and sweeping functions work on the same chassis.

FAQ

What pressure does the washing circuit deliver?The high-pressure piston or centrifugal pump delivers 8-15 MPa, feeding the washing boom, the hand-held spray gun and the spray bars at the brushes and nozzle.
Can it sweep without using water?Yes. The spray valve is adjustable and the air-duct conversion allows recirculation or direct suction, so the truck can work in dry mode or with light dust suppression.
How is water consumption controlled?Consumption runs from 0.03 to 0.10 L per m2 in light dust-suppression mode and is adjusted at the spray valve, with a level gauge and low-water alarm on the tank.
How is the tank filled and drained?By gravity fill or hydrant connection, with a drain valve at the lowest point of the tank.
Which options can be added?A drinking-water tank, a fog cannon and a hand-held spray gun, plus stainless steel 304 tanks, a kerb brush on either or both sides, and left-hand or right-hand drive.
What is the lead time and warranty?About 25-40 working days from down payment, shipped FOB, CIF or DAP by RoRo or break-bulk. Major components carry a 12-month warranty; wear parts such as brushes, nozzle strips and seals are excluded.

Inquiry Information

Tell us the surface to be washed, the spill or dust type, the water source and the route length, and the pump, tank volume and spray layout are specified against those answers.

Tel +86-13083602803  |  WhatsApp +86-16638078903  |  Email info@elorry-ind.com

Supplier factory qualification assessed by SGS under the Alibaba Gold Plus Supplier Assessment Criteria, certificate 479886222_T, valid to 06 Nov 2026.

Image Filename and Alt Suggestions

  • road-sweeper-truck-washing-boom-spray.png - sweeping and washing road sweeper truck with the high pressure washing boom spraying the kerb
  • road-sweeper-truck-washing-spray-gun.png - hand-held spray gun cleaning around a street bin beside the sweeper
  • road-sweeper-truck-washing-tank-gauge.png - water tank level gauge and low-water alarm on the combined body
SEO title: Sweeping and Washing Road Sweeper Truck with 8-15 MPa Water PumpMeta description: Sweeping and washing road sweeper truck with 8-15 MPa high-pressure water pump, washing boom and hand-held spray gun for road washing and dust control.URL slug: /sweeping-and-washing-road-sweeper-truckKeywords: sweeping and washing truck, road sweeper truck, high pressure road washing truck, dust suppression sweeper