Two-Slot Aluminum Alloy Transmitter Display Stand PTB-EXB
Model PTB-EXB · Aluminum alloy · Two transmitter slots · Carbon gold gray
SEO Title: Two-Slot Aluminum Alloy Transmitter Display Stand PTB-EXB for Meeting Rooms
Meta Description: Two-slot transmitter display stand in aluminum alloy with oxidized finish, carbon gold gray, 194×121×55 mm, 750 g, anti-slip pads and built-in counterweight.
URL Slug: /transmitter-display-stand-ptb-exb/
PTB-EXB display and storage stand for two transmitters.
Product Summary
The PTB-EXB is a transmitter display stand built to hold two transmitters in a defined position. The body is made of aluminum alloy with an oxidized surface treatment in carbon gold gray, and the top cover is set at an angle of approximately 15°. Anti-slip foot pads and a built-in counterweight are part of the structure, helping the stand stay steady when transmitters are placed in or lifted out of the slots. It is intended for meeting rooms, training rooms, showrooms and corporate collaboration spaces, where it keeps transmitters organised and within reach between sessions.
Key Features
Two transmitter slots — each transmitter has its own place, so the table stays organised and the next presenter can pick one up without searching.
Aluminum alloy body — the specified material forms a rigid frame for repeated daily placement and removal of transmitters.
Oxidized surface treatment — the finish is part of the stated build and is matched to the carbon gold gray colour of the stand.
Top cover angled at approximately 15° — a fixed cover geometry rather than a flat shelf, as listed in the product specification.
Anti-slip foot pads — pads under the base reduce sliding across desks, credenzas and meeting tables.
Built-in counterweight — additional mass inside the stand helps hold it in place during insertion and removal of transmitters.
Front view: two transmitter slots.Side view: inclined top cover, aluminum alloy body.
Technical Specifications
Model
PTB-EXB
Product type
Transmitter display stand
Capacity
Two transmitter slots
Dimensions
194 × 121 × 55 mm
Weight
750 g
Material
Aluminum alloy
Surface treatment
Oxidized
Top cover angle
Approximately 15°
Colour
Carbon gold gray
Stability features
Anti-slip foot pads, built-in counterweight
Models and Options
PTB-EXB is supplied as a single model: a two-slot stand in carbon gold gray. No other sizes, slot counts or colour versions of this accessory are listed in the current product data, so the specification above is the complete reference for this item. If a project requires a different configuration, share the requirement with our team and we will confirm what can be arranged.
Materials and Structure
The stand is machined in aluminum alloy and finished with an oxidized surface treatment, which gives the carbon gold gray appearance stated in the specification. The unit measures 194 × 121 × 55 mm and weighs 750 g, with a top cover set at an angle of approximately 15°. Underneath, anti-slip foot pads sit between the base and the table surface, and a built-in counterweight is part of the body structure. Together these elements define how the stand sits and how transmitters rest in the two slots.
Applications
Meeting rooms — keeps two transmitters stored and visible at the table or credenza.
Training rooms — gives presenters a fixed place to return transmitters after each session.
Corporate collaboration spaces — supports shared-room housekeeping so transmitters stay accessible and organised.
Customization
tranScreen provides standardized products as well as customized hardware and software for partners with special requirements. If you need this accessory adapted for a project, send us your requirement and our team will confirm feasibility and any change to specification before quoting.
FAQ
How many transmitters can the stand hold?
Two. The PTB-EXB is specified with two transmitter slots, one for each unit.
What are the dimensions and weight?
The stand measures 194 × 121 × 55 mm and weighs 750 g.
What material and finish does it use?
The body is aluminum alloy with an oxidized surface treatment, in carbon gold gray.
Will the stand slide when a transmitter is pulled out?
The design includes anti-slip foot pads and a built-in counterweight, both stated in the specification, to help the stand stay in position during handling.
What does the 15° top-cover angle refer to?
It describes the geometry of the top cover, which is set at approximately 15° as listed in the product specification.
Can this accessory be customized for our project?
Our company offers customized hardware and software for partners with special requirements. Share your target configuration and our team will confirm what is possible for this stand.
Where can I get MOQ, lead time and packing details?
These commercial terms are confirmed per order by our sales team. Contact us with your quantity and destination and we will reply directly.
Address: Room B322 3/F, Block B, No. 168, BAO Yuan Road, BAO An District, Shenzhen, Guangdong Province, China, 518102
Image Filenames and Alt Suggestions
transmitter-display-stand-ptb-exb-two-slot-carbon-gold-gray.png — Alt: Transmitter Display Stand PTB-EXB shown with two transmitter slots in carbon gold gray
transmitter-display-stand-ptb-exb-front-view.png — Alt: Front view of the PTB-EXB transmitter display stand with two empty slots
transmitter-display-stand-ptb-exb-side-view.png — Alt: Side view of the aluminum alloy display stand showing the inclined top cover
