O menu

Two Stage PM VSD Air Compressor for Injection and Blow Molding

Inventário:
SKU: 6550473748
Modelo: SLTT-22V、SLTT-30V、SLTT-37V、SLTT-45V、SLTT-55V、SLTT-75V、SLTT-90V、SLTT-110V、SLTT-132V、SLTT-160V、SLTT-185V、SLTT-220V、SLTT-250V

{{ variable.name }}

{{ value.name }}
Rubber and Plastics Air Supply

Two Stage PM VSD Air Compressor for Injection and Blow Molding

For rubber and plastics plants with high-temperature, dusty and continuous-production workshops. Two-stage PM VSD is applied to injection molding, blow molding, molding and demolding equipment where energy cost and pressure stability matter.

22–250 kW series8–13 bar15%–40% line energy savingPressure stabilization
Two stage PM VSD air compressor for injection and blow molding
Two-stage PM VSD air compressor for rubber and plastics production lines.

Product Summary

In rubber and plastics plants, injection molding and blow molding machines are high-energy consumers. This two-stage PM VSD air compressor is used for steady air supply and significant energy savings on energy-intensive lines. Two-stage compression lowers the stage ratio and thermal load, while PM VSD adjusts speed to changing demand. High-pressure PET bottle blowing at 35–40 bar is a separate high-pressure compressor requirement.

Key Features

Two-stage compression

Lower stage compression ratio, reduced internal leakage and bearing load, higher volumetric efficiency and longer host life.

15% more displacement

Two-stage PM VSD replaces single-stage compression and increases displacement by nearly 15%, adding up to 15% energy saving.

15%–40% line energy saving

Applied to high-energy equipment such as injection molding and blow molding machines for significant energy savings.

Up to 40% energy saving

Compared with ordinary industrial frequency machines. At 8,000 h/year, the saving can reach about USD 30,000 per year.

Integrated shaft structure

The motor and male rotor use one shaft, eliminating coupling and gear transmission and reducing related failure risk.

Low noise and vibration

No motor, bearing, gear or coupling noise; noise range for the series is 65–78 ±3 dB.

Technical Specifications

ParameterSpecification
Model familySLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V, SLTT-250V
Working pressure8–13 bar
Capacity1.36–53.68 m³/min (series range)
Power range22–250 kW
Horsepower30–335 hp
Noise65–78 ±3 dB
Air outlet pipe diameterDN40, DN50, DN65, DN100
Net weight732–6000 kg (series range)
CompressionTwo-stage compression
DrivePermanent magnet variable frequency drive
Rotor profilePatented UV profile, refined by more than 20 procedures
MaterialsCast iron, stainless steel

Models and Options

The SLTT-V series covers 13 models from SLTT-22V to SLTT-250V, with 22–250 kW power, 8–13 bar working pressure and 1.36–53.68 m³/min capacity range. Final model selection depends on required air flow, pressure, duty cycle and site conditions.

Materials and Structure

The air end uses a patented UV rotor profile and two-stage compression structure. Cast iron and stainless steel are used in the construction. The PM VSD motor and male rotor adopt an integrated shaft structure, so there is no coupling or gear transmission. This compact arrangement reduces efficiency loss and mechanical failure points.

Low noise and low vibration are achieved by removing motor, bearing, gear and coupling noise sources. The integrated PM VSD structure also saves floor space, which matters in high-temperature, dusty rubber and plastics workshops.

Applications

This two-stage PM VSD unit is used in rubber and plastics plants for stable, efficient air supply:

  • Steady air supply for standard molding and demolding processes.
  • Injection molding and blow molding machines with high energy consumption, where two-stage PM VSD can achieve 15%–40% energy savings.
  • Continuous production workshops with high temperatures and dust; matched refrigerated dryer and C/T grade precision filters remove moisture and oil to prevent bubbles or shrinkage defects.
  • High-pressure PET bottle blowing at 35–40 bar requires a separate high-pressure screw air compressor.

Customization

Sollant supports OEM/ODM customization. Project requirements can be discussed around the SLTT-V model, working pressure within 8–13 bar, air outlet size, and matched refrigerated dryer or precision filter configuration. Sollant was founded in 2004 and operates a 30,000 ㎡ facility with 20,000 units annual output.

FAQ

Q: Why use two-stage PM VSD for injection and blow molding?

Injection molding and blow molding machines are high-energy consumers. Two-stage compression reduces the stage ratio and thermal load, while PM VSD matches speed to demand. The rubber and plastics solution targets 15%–40% energy savings on energy-intensive lines.

Q: What energy saving can be expected?

Two-stage PM VSD can increase displacement by nearly 15% and save up to 40% versus ordinary industrial frequency machines. For high-energy injection and blow molding equipment, the application scenario targets 15%–40% savings.

Q: Can this unit supply 35–40 bar for PET bottle blowing?

No. This SLTT-V series covers 8–13 bar working pressure. High-pressure PET bottle blowing at 35–40 bar is handled by a separate high-pressure screw air compressor in the plant solution.

Q: What air treatment is matched?

The rubber and plastics solution matches refrigerated air dryers and precision filters (C/T grade) to remove moisture and oil, helping prevent air bubbles, shrinkage and other quality defects in plastic products.

Q: Which models are available?

The SLTT-V series includes SLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V and SLTT-250V.

Q: What certifications are available?

Sollant's related certification set includes CE for air compressors, CE for permanent magnet motors, EMC for the controller, PED verification for oil and air tanks, and ISO 14001 environmental management.

Q: Can Sollant customize and support the project after delivery?

Yes. OEM/ODM support is available, and Sollant provides 24/7 engineering after-sales support and original spare parts through its international service team.

Inquiry Information

Send your required model, working pressure, capacity, site conditions and destination country to info@sollant.com. Tel or WhatsApp: +86 155-8905-3798. Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.

Discuss Your Molding Project

Image Filename and Alt Suggestions

  • two-stage-pm-vsd-air-compressor-injection-molding.png — Alt: Two stage PM VSD air compressor for injection and blow molding lines.
  • two-stage-air-compressor-rubber-plastics-plant.png — Alt: Sollant two-stage air compressor for rubber and plastics plant air supply.
  • pm-vsd-compressor-energy-saving.png — Alt: Two-stage PM VSD compressor unit for energy-intensive production lines.

SEO Title: Two Stage PM VSD Air Compressor for Injection and Blow Molding | Sollant

Meta Description: Two-stage PM VSD air compressor for injection and blow molding. Covers 22–250 kW, 8–13 bar, and up to 40% energy saving for high-energy production lines.

URL Slug: two-stage-pm-vsd-air-compressor-injection-molding