O menu

Two Stage PM VSD Air Compressor for Textile Plant Air Supply

Inventário:
SKU: 0387128379
Modelo: SLTT-22V、SLTT-30V、SLTT-37V、SLTT-45V、SLTT-55V、SLTT-75V、SLTT-90V、SLTT-110V、SLTT-132V、SLTT-160V、SLTT-185V、SLTT-220V、SLTT-250V

{{ variable.name }}

{{ value.name }}
Textile Industry Air Supply

Two Stage PM VSD Air Compressor for Textile Plant Air Supply

For textile plants running continuous production lines in high-temperature, dusty or poorly ventilated workshops. Two-stage PM VSD reduces operating cost while delivering stable air for textile machinery.

22–250 kW series8–13 barContinuous operationUp to 40% energy saving
Two stage PM VSD air compressor for textile plant air supply
Two-stage PM VSD air compressor for continuous textile plant duty.

Product Summary

Textile plants often run long shifts in hot, dusty workshops. This two-stage PM VSD air compressor is selected for stable air supply to textile machinery and continuous production lines, where energy cost is a major operating expense. The two-stage design lowers the compression ratio per stage and reduces thermal load; PM VSD adjusts speed to demand. For Class 0 oil-free air in air-jet looms and dyeing/printing, the plant solution specifies a separate water-lubricated screw compressor.

Key Features

Two-stage compression

Lower stage compression ratio, reduced internal leakage and bearing load, higher volumetric efficiency and longer host life.

15% more displacement

Two-stage PM VSD replaces single-stage compression and increases displacement by nearly 15%, adding up to 15% energy saving.

Patented UV rotor profile

The rotor is refined by more than 20 procedures to ensure profile accuracy, reliability and effectiveness.

Up to 40% energy saving

Compared with ordinary industrial frequency machines. At 8,000 h/year, the saving can reach about USD 30,000 per year.

Integrated shaft structure

The motor and male rotor use one shaft, eliminating coupling and gear transmission and reducing related failure risk.

Low noise and vibration

No motor, bearing, gear or coupling noise; noise range for the series is 65–78 ±3 dB.

Technical Specifications

ParameterSpecification
Model familySLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V, SLTT-250V
Working pressure8–13 bar
Capacity1.36–53.68 m³/min (series range)
Power range22–250 kW
Horsepower30–335 hp
Noise65–78 ±3 dB
Air outlet pipe diameterDN40, DN50, DN65, DN100
Net weight732–6000 kg (series range)
CompressionTwo-stage compression
DrivePermanent magnet variable frequency drive
Rotor profilePatented UV profile, refined by more than 20 procedures
MaterialsCast iron, stainless steel

Models and Options

The SLTT-V series covers 13 models from SLTT-22V to SLTT-250V, with 22–250 kW power, 8–13 bar working pressure and 1.36–53.68 m³/min capacity range. Final model selection depends on required air flow, pressure, duty cycle and site conditions.

Materials and Structure

The air end uses a patented UV rotor profile and two-stage compression structure. Cast iron and stainless steel are used in the construction. The PM VSD motor and male rotor adopt an integrated shaft structure, so there is no coupling or gear transmission. This compact arrangement reduces efficiency loss and mechanical failure points.

Low noise and low vibration are achieved by removing motor, bearing, gear and coupling noise sources. The integrated PM VSD structure also saves floor space, which matters in dense textile workshops.

Applications

This two-stage PM VSD unit is applied to textile plant power air and continuous production lines under demanding workshop conditions:

  • Stable air supply for textile machinery and continuous long-term production lines.
  • Workshops with high temperatures, poor ventilation and persistent dust.
  • Matched refrigerated dryer and C/T grade precision filters to remove water and oil and maintain stable pressure across the piping network.
  • For Class 0 oil-free air in air-jet looms and dyeing/printing processes, the plant solution specifies a separate water-lubricated screw compressor.

Customization

Sollant supports OEM/ODM customization. Project requirements can be discussed around the SLTT-V model, working pressure within 8–13 bar, air outlet size, and matched refrigerated dryer or precision filter configuration. Sollant was founded in 2004 and operates a 30,000 ㎡ facility with 20,000 units annual output.

FAQ

Q: Why use two-stage PM VSD in a textile plant?

Textile production lines often run continuously and consume large amounts of electricity. Two-stage PM VSD increases displacement by nearly 15% and can save up to 40% versus ordinary industrial frequency machines, while holding stable pressure for textile machinery.

Q: Can it operate in high-temperature and dusty workshops?

The two-stage design reduces the single-stage compression ratio and thermal load. For high-temperature, poor-ventilation or dusty sites, the installation should be reviewed for ventilation, dust protection and maintenance access before model selection.

Q: What air treatment is matched to textile plants?

The textile solution matches refrigerated air dryers and precision filters (C/T grade) to remove water and oil and maintain stable pressure in the piping network, protecting downstream precision textile equipment.

Q: Is this unit oil-free for air-jet looms?

This page covers the two-stage PM VSD power-air unit. For Class 0 oil-free air in air-jet looms and dyeing/printing, a water-lubricated screw air compressor is specified separately in the plant solution.

Q: Which models are available?

The SLTT-V series includes SLTT-22V, SLTT-30V, SLTT-37V, SLTT-45V, SLTT-55V, SLTT-75V, SLTT-90V, SLTT-110V, SLTT-132V, SLTT-160V, SLTT-185V, SLTT-220V and SLTT-250V.

Q: What certifications are available?

Sollant's related certification set includes CE for air compressors, CE for permanent magnet motors, EMC for the controller, PED verification for oil and air tanks, and ISO 14001 environmental management.

Q: Can Sollant customize and support the project after delivery?

Yes. OEM/ODM support is available, and Sollant provides 24/7 engineering after-sales support and original spare parts through its international service team.

Inquiry Information

Send your required model, working pressure, capacity, site conditions and destination country to info@sollant.com. Tel or WhatsApp: +86 155-8905-3798. Address: No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.

Discuss Your Textile Project

Image Filename and Alt Suggestions

  • two-stage-pm-vsd-air-compressor-textile-plant.png — Alt: Two stage PM VSD air compressor for textile plant air supply.
  • two-stage-air-compressor-textile-line-duty.png — Alt: Sollant two-stage air compressor configured for continuous textile line duty.
  • pm-vsd-two-stage-compressor-series.png — Alt: Two-stage PM VSD compressor unit from the SLTT-V series.

SEO Title: Two Stage PM VSD Air Compressor for Textile Plant Air Supply | Sollant

Meta Description: Two-stage PM VSD air compressor for textile plants. Covers 22–250 kW, 8–13 bar, low noise, and matched dryer/filter options for continuous production.

URL Slug: two-stage-pm-vsd-air-compressor-textile