O menu

VP-Controlled Twin Tower Nitrogen Generator for Laser Cutting Assist Gas

Inventário:
SKU: 6405255484
Modelo: SLT-80N、SLT-130N、SLT-170N、SLT-200N、SLT-250N、SLT-320N、SLT-400N、SLT-480N、SLT-600N、SLT-700N、SLT-800N

{{ variable.name }}

{{ value.name }}
SLT-80N – SLT-800N Series · Twin Tower

VP-Controlled Twin Tower Nitrogen Generator for Laser Cutting Assist Gas

On-site PSA nitrogen supply for laser cutting and machinery manufacturing plants: 80–800 Nm³/h of nitrogen from compressed air at 0.7 MPa adsorption pressure, unit weight 1,100–4,400 kg.

Twin tower PSA nitrogen generator for laser cutting assist gas
SEO Title: VP-Controlled Twin Tower Nitrogen Generator for Laser Cutting Assist Gas
Meta Description: Twin tower PSA nitrogen generator, 80-800 Nm³/h at 0.7 MPa, with VP control and vacuum-loaded molecular sieve. Built for laser cutting assist gas lines.
URL Slug: /twin-tower-nitrogen-generator-laser-cutting

Product Summary

Two adsorption towers alternate between adsorption and regeneration, so nitrogen flows continuously while the offline tower is purged. Variable-Period (VP) control adjusts operating frequency to actual gas draw, holding a stable air-to-nitrogen ratio when demand swings — typical of laser cutting cells that run at full assist-gas load only part of the shift. The molecular sieve bed is vacuum loaded, dense-phase packed and settled on a variable-frequency vibration platform, so it resists settling and pulverisation, and the same tower volume carries about 10% more sieve. Adsorption pressure is 0.7 MPa, with nitrogen outlet options of Rp1, Rp1-1/2 and Rp2.

Key Features

VP control, steady air-to-nitrogen ratio

Operating frequency follows real demand, reducing average energy consumption on lines with large gas-demand fluctuations; the ratio stays stable across the flow range.

Vacuum-loaded, dense-phase packed sieve

Vacuum loading plus a variable-frequency vibration platform hold the molecular sieve firmly — no settling or pulverisation across an operational life of up to 8 years.

10% more sieve in the same tower

Packing density rises by 10% inside an adsorption tower of identical volume, so a given footprint carries more adsorbent.

20% better adsorbent utilisation

An energy-efficient unequal-pressure equalisation structure raises adsorbent utilisation by 20%.

Over 30 days of operating records

The PLC controller integrates data monitoring and storage and retains operational records for more than 30 days.

Cut-edge protection

Nitrogen as an inert assist gas prevents oxidation and discoloration on stainless and low-carbon steel; closed-loop control of purity and output pressure avoids the fluctuations that spoil cut quality.

Technical Specifications

ParameterValue
ConfigurationTwin tower PSA nitrogen generator
Nitrogen flow rate80–800 Nm³/h (model dependent)
Demand capacity of air2.4–24 Nm³/min
Adsorption pressure0.7 MPa
Air inletRp1-1/2, DN50, DN65
Nitrogen outletRp1, Rp1-1/2, Rp2
Weight1,100–4,400 kg
ControlPLC with data monitoring and storage; Variable-Period (VP) control
MaterialsAluminum alloy, stainless steel, carbon steel
Model rangeSLT-80N, SLT-130N, SLT-170N, SLT-200N, SLT-250N, SLT-320N, SLT-400N, SLT-480N, SLT-600N, SLT-700N, SLT-800N
Management systemISO 14001, certificate 05126E00664R053 issued by NOA, valid to 2029-03-26

Models and Options

Eleven designations run from SLT-80N through SLT-800N, covering 80–800 Nm³/h nitrogen flow, 2.4–24 Nm³/min air demand and 1,100–4,400 kg unit weight. The twin tower type is one of three configurations offered in this series, alongside modular and combined types. Purity target, site altitude, ambient temperature and upstream air quality all affect final sizing, so the flow rate, connection size and weight of a specific model are confirmed at quotation against your duty point.

Materials and Structure

Towers, piping and frame are available in aluminum alloy, stainless steel or carbon steel — stainless steel for humid or sanitary surroundings, carbon steel for general indoor plant rooms, aluminum alloy where unit weight matters. Inside the towers, molecular sieve is vacuum loaded and dense-phase packed; the unequal-pressure equalisation structure links the two towers so pressurised gas brings the regenerating tower up to pressure instead of being vented.

Applications

Laser cutting

Sector data records high temperature and humidity, dust and particulate, and continuous operation. Nitrogen keeps stainless and low-carbon steel cut edges free of oxidation, while compressed air is the lower-cost assist gas for aluminum. Recorded requirements: low noise, stable flow, high filtration precision and high pressure capability.

Machinery manufacturing

On-site generation across 80–800 Nm³/h replaces delivered nitrogen for machining and assembly plants; the matched equipment set includes the air compressor, filters, air dryer and air receiver.

Customization

OEM and ODM configuration is supported: material selection across aluminum alloy, stainless steel and carbon steel, inlet and outlet sizing across Rp1-1/2, DN50, DN65 and Rp1, Rp1-1/2, Rp2, plus control integration. Sollant operates a 30,000 ㎡ facility with 20 R&D engineers and an annual output of 20,000 units; purity, delivery pressure and dew point targets are confirmed per project on the quotation.

FAQ

What nitrogen flow can this generator deliver?

80–800 Nm³/h across the SLT-80N to SLT-800N series, with air demand of 2.4–24 Nm³/min. The exact model is sized on the flow and purity you need.

What nitrogen purity is achievable?

The published series specification lists flow, adsorption pressure, connections and weight. Purity is configured per application and confirmed with the quotation, so please state your target purity in the enquiry.

How long does the molecular sieve last?

Up to 8 years of operational life, because vacuum loading and dense-phase packing prevent settling and pulverisation of the sieve bed.

Will it cope with fluctuating gas demand?

Yes. VP control adjusts operating frequency and maintains a stable air-to-nitrogen ratio when demand rises or falls sharply.

What connections are required?

Air inlet Rp1-1/2, DN50 or DN65; nitrogen outlet Rp1, Rp1-1/2 or Rp2, depending on the model selected.

Can the upstream air treatment be quoted too?

Matched equipment in the laser cutting application data covers air compressor, filter, air dryer and air receiver, so the air treatment package can be quoted together with the generator.

Inquiry Information

Send your duty point: required nitrogen flow (Nm³/h), target purity, delivery pressure, ambient conditions and available utilities. Email info@sollant.com · Tel and WhatsApp +86 155-8905-3798 · Shanghai Sollant Energy Saving Technology Co., Ltd., No.215, Songri Center, Beihongqiao, Jiading District, Shanghai, China.

Image Filename and Alt Suggestions

  • twin-tower-nitrogen-generator-slt-series-front.png — Alt: Twin tower PSA nitrogen generator for laser cutting assist gas, front view
  • twin-tower-nitrogen-generator-plc-panel.png — Alt: PLC control panel with 30-day data storage on the twin tower nitrogen generator

Filenames follow the pattern product-model-application-view so the laser cutting variant stays distinct from the modular and combined variants.